Remove Stuck 💫 Spinning CV Axle Nut 🔩 On Rotor Wheel FAST

Quickly remove an axle nut that keeps spinning. This happens when the car is not on the ground & is raised up on a floor jack. Just use a power tool or breaker bar, socket & a flat head screwdriver to easily remove! Please 👍 & 🔔 SUBSCRIBE. Mention in the COMMENTS any thoughts. For details, tools used, & other helpful videos click SHOW MORE 👉.
Mention your thoughts in the COMMENTS 💬💬💬, if you have any questions or better ideas for the other viewers.
To help support and grow this channel you can send me a cup of coffee ☕ here:
👉 www.buymeacoff...
OR
👉 ko-fi.com/fixc...
OR
➡️ Click the SUPER THANKS button above.
🧰 Tools used:
1) Breaker bar 1/2": amzn.to/3oQGTJx
2) Socket (in this video 32 mm was used): amzn.to/2HWyzHp
3) Torque Wrench 1/2 " or Torque power gun: amzn.to/3eiZl8P
4) Flat head screwdriver amzn.to/3wbHuZd
🧰 Supplies you could use to help free the rust off before removing, especially if regular penetrating oil doesn't help:
1) Automatic Transmission Fluid (ATF) amzn.to/324RzKS
2) Acetone amzn.to/3oMVFRm
3) Paper Cup
4) Toothbrush
5) Steel wool, brush, shop towels or cloth: amzn.to/34NvRfQ
6) If you think you need a new CV Axle nut, a new CV joint usually comes with a new cv axle, however you can also purchase them separately if necessary.
Here is the link for a new CV Axle Nut 👉👉👉 amzn.to/3n2VH72
This quick video shows how to remove a stuck Axle nut when the vehicle is already on the ground:
👉👉👉 • Remove And Replace Stu...
AND
This video shows how to identify all the symptoms of a bad CV Axle Half Shaft
👉 • 👀 How To Know If CV Ax...
More videos will be available later involving the entire replacement of a CV Axle with many tips and tricks along the way. 🔔 SUBSCRIBE 🔔 to be notified when those are available.
THANKS AND PLEASE 👍 👍 👍 AND 🔔 #FixCarYourself

[@JoseGonzalez-ed4hq]

I thought we cant do this with car in the air it can make it move i need to do it too i took off other sides axle out and i cant get new axle in on drivers side it dosent pop out easy so idk what to do

[@larryharry7221]

Back in the day I would crack it loose with the tire on the ground. The weight of the car would hold it.

[@FixCarYourself]

Yes that is still the best way to do it. This helps more so for people who already jacked the car up or are doing this at a junkyard where the vehicle is already raised up.

[@Thomas998822]

This is a good way to crack your rotor. I tried to out the lug nuts in and wedge a 3ft breaker bar, it was so mch force it stripped the threads right off the lug nuts and bent it.