I can’t express how happy I am with this video! I’ve tackled a few foam project before but it was a lot of guessing and most of the results just didn’t look right. But after this video, it just makes so much more sense and I feel a lot more confident going in to foam crafting for cosplays, keep up the good work!
Fantastic tips. Familiar with using a dremel but about to use it on eva for the first time. This has been invaluable in saving time, frustration and materials. Thank you.
This video really deserves 10x the views it has. I was having massive problems with my dremel flaking bits off or softening points - both of those issues solved thanks to your video. Can't praise you enough
Hi AI! Congrats on getting started! You’re gonna have fun. Hey in case you didn’t know, we have a bunch of other tips videos and builds containing tons of info. Here’s the link to our home page in case you want to check them out : ruclips.net/user/blacksheepprops Just look under VIDEOS or PLAYLISTS for a complete list. Thanks for watching!
thank you so much for making this video!! i just recently got into foam crafting and practiced on some scraps with my rotary tool for the first time today. i didn't understand why all of my corners kept turning out so choppy--you've opened my eyes!! this video is so informative and thorough, and now i feel capable of using my tools right :D
Awesome video! This will definitely assist my child with his school project. Would you please kindly advise what you used to stick the foams together and also what's the best thing to use to stick the foam to a cardboard? Again, thanks so much for sharing your knowledge! You're a superstar!
Wow! Thank you so much for the kind words! I mostly use contact cement to glue foam to foam, but I sometimes use super glue for really small parts. I have a video on the channel that focuses on the basics of contact cement that you can watch. Also, you can watch any of my build videos and it will show each step in making a foam prop so you can see when and how I use the different glues. I can not help with the cardboard though since I don not really work with cardboard. I hope the videos on my channel will help you. Good luck!
Hi Carlo! I dont have any data but every builder I learned from stressed the importance of using a dust mask when grinding foam. I never grind without a dust mask. And I frequently open the garage door and blow all the foam dust out so the shop stays as clean as possible. It also makes a difference according to the bit you are using - the super rough bits throw a ton of dust while the smoother bits don’t throw very much. But either way, I never grind without a dust mask. Be safe!
Thanks for the quick reply! Just getting started with foam. I was going a little slow. Like 5-6000. But, when I cranked it up, it was getting away from me. After watching your videos, now I know why that was happening..
Why do we need to grind in the direction of rotation? I’ve been going in the opposite direction and it’s been easier to control. Are there negative effects of dint it this way?
Hi there! Is the bit you're using the 932 aluminum oxide grinding stone? I've been trying to figure out what to use for the dremel because I can't find a sanding band grit higher than 240 for sale 😭 any help is appreciated!
Hi Jade! I believe you are correct. It came with the set. You know what I really love is the Dremel 454 chainsaw sharpening stone. I almost exclusively use that one now for all my smooth stuff. It’s thinner so I can get into areas better and it seems like it’s the exact same grit as the 932. LOVE that one.
No problem Ash! Glad it was helpful. In case you weren’t aware, we have other tips and build videos on our home page : ruclips.net/user/blacksheepprops Just check under the VIDEOS tab near the upper left for a complete list. Thanks for watching!
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I can’t express how happy I am with this video! I’ve tackled a few foam project before but it was a lot of guessing and most of the results just didn’t look right. But after this video, it just makes so much more sense and I feel a lot more confident going in to foam crafting for cosplays, keep up the good work!
Fantastic tips. Familiar with using a dremel but about to use it on eva for the first time. This has been invaluable in saving time, frustration and materials. Thank you.
This video really deserves 10x the views it has. I was having massive problems with my dremel flaking bits off or softening points - both of those issues solved thanks to your video. Can't praise you enough
Wow, thanks so much Daniel. Super glad it helped you!
This is handsdown the best tutorial Ive seen. I've been so afraid to test out my dremel but this makes me feel so prepared
Awesome! I’m glad this has helped you to go for it!!
Thank you so much! Just started foam crafting and this is great advice!
Hi AI!
Congrats on getting started! You’re gonna have fun.
Hey in case you didn’t know, we have a bunch of other tips videos and builds containing tons of info.
Here’s the link to our home page in case you want to check them out : ruclips.net/user/blacksheepprops
Just look under VIDEOS or PLAYLISTS for a complete list.
Thanks for watching!
thank you so much for making this video!! i just recently got into foam crafting and practiced on some scraps with my rotary tool for the first time today. i didn't understand why all of my corners kept turning out so choppy--you've opened my eyes!! this video is so informative and thorough, and now i feel capable of using my tools right :D
Awesome Ariana! So glad it was helpful! Every time you use the tool you will get better and better.
Awesome video! This will definitely assist my child with his school project. Would you please kindly advise what you used to stick the foams together and also what's the best thing to use to stick the foam to a cardboard? Again, thanks so much for sharing your knowledge! You're a superstar!
Wow! Thank you so much for the kind words!
I mostly use contact cement to glue foam to foam, but I sometimes use super glue for really small parts. I have a video on the channel that focuses on the basics of contact cement that you can watch. Also, you can watch any of my build videos and it will show each step in making a foam prop so you can see when and how I use the different glues. I can not help with the cardboard though since I don not really work with cardboard.
I hope the videos on my channel will help you. Good luck!
I may have missed the part where you mentioned what speed works best for grinding or sanding…full tilt?
Hi! Yep, I put it on the highest it will go.
I learned into the point. Thank you very much into the point sensei!
Haha! Thanks Edward! I’m so glad it helped!
Are there any Health and Safety Data sheets available for EVA foam as looking into dust extraction and filtration
Hi Carlo!
I dont have any data but every builder I learned from stressed the importance of using a dust mask when grinding foam. I never grind without a dust mask. And I frequently open the garage door and blow all the foam dust out so the shop stays as clean as possible. It also makes a difference according to the bit you are using - the super rough bits throw a ton of dust while the smoother bits don’t throw very much. But either way, I never grind without a dust mask.
Be safe!
@@BlackSheepProps thank you for replying, what mask do you use in the video please
I use a 3M N95 dust mask.
@@BlackSheepProps thank you kindly
This video was super helpful for me. One question. Do you have any recommendations regarding the Dremel rpm speed settings you like best? Thank you.
Hi Margot! Glad it was helpful. I always use mine on high which is 35000 RPMs for all of my foam prop work.
Thanks for the quick reply! Just getting started with foam. I was going a little slow. Like 5-6000. But, when I cranked it up, it was getting away from me. After watching your videos, now I know why that was happening..
It will get super easy in no time. You’ll get really smooth.
What speed do you generally set your dremel to?
Hey Cameron,
Mine has 2 settings, I’ve always used the high setting since the day I got it.
Why do we need to grind in the direction of rotation? I’ve been going in the opposite direction and it’s been easier to control. Are there negative effects of dint it this way?
Hi Sabina,
Whatever is working for you is totally cool. No rules.
Hi there! Is the bit you're using the 932 aluminum oxide grinding stone? I've been trying to figure out what to use for the dremel because I can't find a sanding band grit higher than 240 for sale 😭 any help is appreciated!
Hi Jade! I believe you are correct. It came with the set. You know what I really love is the Dremel 454 chainsaw sharpening stone. I almost exclusively use that one now for all my smooth stuff. It’s thinner so I can get into areas better and it seems like it’s the exact same grit as the 932. LOVE that one.
Surely you are meant to move the tool the other direction. What you are suggesting is a climb cut, hence the issue of loosing control you mentioned.
Very informative. Thanks. Build on.
Hi Kyle! Thanks dude!
Thank you, very helpful
No problem Ash! Glad it was helpful.
In case you weren’t aware, we have other tips and build videos on our home page : ruclips.net/user/blacksheepprops
Just check under the VIDEOS tab near the upper left for a complete list.
Thanks for watching!
"INTO THE CORNER!"
Nice Tip(s)!!
very informative keep up the good work/ill be Subing u :)
Awesome! Thanks so much, glad you liked it.