You started taking off the plastic wrap and I got flashbacks to struggling with a 23 lb block of Crafter's Choice! The soaps turned out so well. I've never seem the raindrop technique before
LOL- I was feeling those flashbacks, too! Luckily it was much easier to remove, but I was trying to be careful not to tear it and leave plastic in my soap. I've seen the raindrop technique going around the resin community, but only fairly recently- I think the trend started last year. I could be totally wrong though. Thank you, and thanks for watching!
Yes, be hyper aware of the weather, but also try keeping soaps in the coolest/driest room that you have, maybe near an AC vent? I also allow mine to dry by placing a fan right on them for a day or two, and spritz every couple of hours with 91% Rubbing Alcohol. Rotate the soaps, or the fan, to prevent glycerin dew from forming. If it does form, sometimes RA spritzed on can eliminate it, sometimes you have to wipe them down with a paper towel or non-linty cloth, then spritz. When they are dry, either wrap them with an airtight wrap or shrink wrap, or place them in an airtight container, like a gallon ziploc until you can wrap. I'm in Iowa now, so I'm going to have to do a lot of adapting when it gets cold! 🥶
What a great question, my friend! I occasionally add small amounts to thinner sheets that I want to remain flexible, especially if it's not my go-to premium crystal clear. Like the basic clear doesn't stay as flexible, so I add about a tsp per pound, especially when rolling or curving like in my Ribbon Candy soap. That's mostly it, except I include it in my sugar scrubs. I also disperse the titanium dioxide in glycerin. Thank you for the great question! 🥰😘
Thank you very much for this video, I can't wait to try this technique for my next project. Can you tell me about the activated charcoal that you seemed to have premixed in the "mustard/ketchup" bottle (for lack of a better a description), is this a premix of glycerin and activated charcoal that you keep on hand? I usually jut mix as I use, but I like your premade container, better. thank you.
I'm so glad you liked the video and can't wait to see your project! Yes, the activated charcoal is premixed in glycerin, it is time saving to me. It mixes in beautifully with RA, too, but I just like to keep the glycerin mix handy. I put the little steel balls in that they use for mixing nail polish to help shake it up. I put about 1 tsp of charcoal for every Tablespoon of glycerin- but that really is an estimate. I go by the consistency- can I pour it, or does it end up like a paste? If it does, I add a little more glycerin. If you want super saturated, the alcohol is a little better, I just hate opening the jar as it flies everywhere, LOL. Pretty sure I just got condiment bottles from Amazon. Thanks for watching!🙂❤
Thank you, and yes of course! They are basically re-usable craft sticks/stir sticks. They are made for using in resin, but make handy tools in the general craft and skincare realms, too. They are plastic, but you can sanitize and reuse them indefinitely, unlike wooden sticks which have to be thrown out often, as they are porous and can harbor bacteria and mold. I found them on Amazon, and you should be able find them easily by searching for stir sticks. Hope that helps! 😁🥰
if you brush in one direction a color.. then brush another color over going the opposite direction.. they become 'color changing' when you move/roll it to see the pattern.. one color. turn it around and the other will show..
So cool! I hope I get to see you post them in one of the soap groups! I love seeing people use the techniques and ideas in different ways- I bet that heart is stunning! 😍🙂
YAY! I'm so glad! If you are a part of any FB soap groups and you post it, please tag me (as Terry Bartlett) because I would love to see your results! That part is so much fun for me, to see everyone's versions. Thank you for watching, and for commenting! 🙂❤
These are so cool ! I can’t wait to try. I look forward to watching more of your videos. You explain the process so well that even as a very new beginner I want to learn more. Thank you for sharing 😊
Not at all! The loaf molds I found on Amazon and for me and what I make, they are SO useful! Here's a link to one that looks like it's the same- it's at least similar: www.amazon.com/Areej-Heavy-Instructions-Silicone-Lavender/dp/B07VWYSFHW/ref=sr_1_34?crid=2IFOXCR4BE3NN&keywords=silicone%2Bloaf%2Bmolds%2Bfor%2Bsoap&qid=1694989772&sprefix=silicone%2Bloaf%2Bmolds%2Caps%2C120&sr=8-34&th=1 🙂
Thank you for sharing your talent on your channel. I have learned so much. I tried this and the soap was beautiful. I tried it a second time but I used mica instead of activated charcoal and my soap turned out soft. Would using mica cause this?
First of all, thank you so much for watching and I am so glad you are learning from my channel! The only ways I could see mica causing a soap to turn out soft would be if you used a very large amount of mica and dispersed it in a very large amount of rubbing alcohol, and even then, the alcohol would eventually evaporate and the soap would harden. If your mica wasn't soap safe, perhaps there were additional ingredients, or you may have dispersed your mica in glycerin or in oil instead of alcohol, that may affect hardening. To clarify, I only use glycerin to disperse Activated Charcoal and Titanium Dioxide. I mix my micas in rubbing alcohol. Adding waxes, or adding too much honey can cause a soap not to set up. I sure hope I was able to answer your question and help you figure out the problem. Let me know if I can further help you troubleshoot. Thank you! ❤🙂
Thank you for your response. I didn’t think I used to much mica. I may have used to much rubbing alcohol so hopefully it will harden up. Thanks again so much.
Well, I add it right after pouring, and I don't pour it real hot, but a bit over the melting point of the soap, between 127-130 F. You don't remove the saran wrap until it's completely hardened and set up. It takes a while longer to set because it is covered. I'm sorry it didn't work for you. Let me know how else I can help.
Hi, Lisa! I do get sweating sometimes, as I live in Florida, where it's humid as heck! The best thing is to avoid it altogether, by NOT overheating your soap base, NOT adding a bunch of oils or butters, NOT putting it in the fridge to cool, and NOT reheating too many times. IF it does happen, as it certainly can no matter how careful you are, you can spritz with 91-99% Isopropyl Alcohol & then wipe it off with a lint-free paper towel, you can also rinse in distilled water, then spritz with the same alcohol, and then in both of those cases, let dry in front of a fan or dehumidifier, rotating them to get every side. I spritz more than once, it helps the soaps form a slightly thicker "skin" on the outside, which can prevent the glycerin from attracting the water from the air. Some people just wrap airtight with saran wrap or shrink wrap immediately after they come out of the mold. I find that's just not enough here in the Swamps! 🤣 I "cure" them (which doesn't mean saponify, as some people think, but means allowing them to lose water weight) before I wrap them, usually with a fan & spritzing a few times with the RA. Hope that helps. I plan on doing a troubleshooting video some day, and I'll definitely include this, as it's a common problem. 🙂❤
Now that I answered, I'm not sure you are "Lisa"! I'm sorry, but when I looked at your question, I swear I saw "Lisa" somewhere! It's NOT there now! I'm so sorry! 🥺
Hi, Taryn! I mix my activated charcoal (made from coconut- the shells I believe), with pure vegetable food grade glycerin, at about a 3:1 ratio by weight. I'm sure you can mix it in with other things, maybe the fragrance oil- but I haven't done that. I've yet to have a problem adding glycerin in with my charcoal or with my titanium dioxide, when I use it. You may have to experiment to get the right amount for you and your soap base. Hope that helps, as I wasn't sure what you wanted to know! 😁 If this doesn't answer your question, just let me know! Thanks for watching! 🙂❤
Does mica get all over your hands since it is kind layered and not mixed into the soap? Would you use poly80 to help with any transfer issues and help it in water?
Mica will mix in with the suds as you wash and rinse clean away! A lot of people paint the tops of their soaps with mica, especially intricate molds with designs. Great question, though! 🙂🥰
@@msTsoapWill the mica stain the bath cloth while they’re using soap? I figure eventually yes, as they keep using the bath cloth. I’m wondering will customers get freaked out initially?
@@brendac8309 To be honest, it depends on the mica. I haven't had a problem with it, but I do tell my customers if they are buying brightly colored soaps, probably best NOT to use your best washcloths given to you by your Aunt Tilly at your wedding. LOL Also, rinsing well after tends to prevent staining. Hope that helps! Thanks for watching and commenting! 🥰🥰
You started taking off the plastic wrap and I got flashbacks to struggling with a 23 lb block of Crafter's Choice! The soaps turned out so well. I've never seem the raindrop technique before
LOL- I was feeling those flashbacks, too! Luckily it was much easier to remove, but I was trying to be careful not to tear it and leave plastic in my soap. I've seen the raindrop technique going around the resin community, but only fairly recently- I think the trend started last year. I could be totally wrong though. Thank you, and thanks for watching!
Can you offer any tips on soaping in humidity?? I also live in Florida and just began soaping! I would like to master how to work with the temps!
Yes, be hyper aware of the weather, but also try keeping soaps in the coolest/driest room that you have, maybe near an AC vent? I also allow mine to dry by placing a fan right on them for a day or two, and spritz every couple of hours with 91% Rubbing Alcohol. Rotate the soaps, or the fan, to prevent glycerin dew from forming. If it does form, sometimes RA spritzed on can eliminate it, sometimes you have to wipe them down with a paper towel or non-linty cloth, then spritz. When they are dry, either wrap them with an airtight wrap or shrink wrap, or place them in an airtight container, like a gallon ziploc until you can wrap. I'm in Iowa now, so I'm going to have to do a lot of adapting when it gets cold! 🥶
They turned out great, Terry! I always finf inspiration watching your projects!
Thank you so much! I'm so happy they inspire you! 🙂
Lovely. We are lucky to have your videos. Thank you for sharing. ❤❤😊😊
Thank you so much, and thanks for watching! Really glad you like them!❤❤❤
Beautiful!!!
Thank you! One of my favorite set of techniques! So much fun to do! 🥰
Wow i love them! You gave me a very good idea for my soap making.
Thank you! So glad I could give you inspiration! Thanks for watching! 🥰
Those soaps are beautiful!! Well done!! 💜
Thank you so much! It's such a fun technique! ❤😊Thanks for watching!
@@msTsoap you’re welcome!! ☺️💕
You used the activated charcoal dispersed with glycerin in this video. What other ways do you use glycerin with your soaps?
What a great question, my friend! I occasionally add small amounts to thinner sheets that I want to remain flexible, especially if it's not my go-to premium crystal clear. Like the basic clear doesn't stay as flexible, so I add about a tsp per pound, especially when rolling or curving like in my Ribbon Candy soap. That's mostly it, except I include it in my sugar scrubs. I also disperse the titanium dioxide in glycerin. Thank you for the great question! 🥰😘
@@msTsoap Thank you! I'm always learning something from you! 😃
@@susanlallak9756 you're quite welcome! 🥰
Love Love your videos ! Your a absolute artist with soap! Appreciate your teaching! Thank ypu
Thank you so much! So glad they are helpful to you. Thank you for watching! ❤😊🥰
I ended up painting the soap with mica and I absolutely love the look. I'll try and send you pictures:)
They turned out so pretty! 😍
Thank you very much for this video, I can't wait to try this technique for my next project. Can you tell me about the activated charcoal that you seemed to have premixed in the "mustard/ketchup" bottle (for lack of a better a description), is this a premix of glycerin and activated charcoal that you keep on hand? I usually jut mix as I use, but I like your premade container, better. thank you.
I'm so glad you liked the video and can't wait to see your project! Yes, the activated charcoal is premixed in glycerin, it is time saving to me. It mixes in beautifully with RA, too, but I just like to keep the glycerin mix handy. I put the little steel balls in that they use for mixing nail polish to help shake it up. I put about 1 tsp of charcoal for every Tablespoon of glycerin- but that really is an estimate. I go by the consistency- can I pour it, or does it end up like a paste? If it does, I add a little more glycerin. If you want super saturated, the alcohol is a little better, I just hate opening the jar as it flies everywhere, LOL. Pretty sure I just got condiment bottles from Amazon. Thanks for watching!🙂❤
Hi Ms.Terry, you’re very inspiring love your.work (art creations) May I ask you the tool that looks like a nail file what it is?
Thank you, and yes of course! They are basically re-usable craft sticks/stir sticks. They are made for using in resin, but make handy tools in the general craft and skincare realms, too. They are plastic, but you can sanitize and reuse them indefinitely, unlike wooden sticks which have to be thrown out often, as they are porous and can harbor bacteria and mold. I found them on Amazon, and you should be able find them easily by searching for stir sticks. Hope that helps! 😁🥰
if you brush in one direction a color.. then brush another color over going the opposite direction.. they become 'color changing' when you move/roll it to see the pattern.. one color. turn it around and the other will show..
That's a fantastic tip! I may try that on my next set of these! Thanks for sharing and thank you for watching. 😊❤
Wow these are absolutely fantastic 😍
thank you so much! 🙂🥰
i did these in a circle and in hearts and in oblong turned out great
So cool! I hope I get to see you post them in one of the soap groups! I love seeing people use the techniques and ideas in different ways- I bet that heart is stunning! 😍🙂
That's clever! Looks fun! And loved the soaps you came up with!
Thank you! It was SO much fun! 🙂
tried this soap last night came out fabules
YAY! I'm so glad! If you are a part of any FB soap groups and you post it, please tag me (as Terry Bartlett) because I would love to see your results! That part is so much fun for me, to see everyone's versions. Thank you for watching, and for commenting! 🙂❤
These are so cool ! I can’t wait to try. I look forward to watching more of your videos. You explain the process so well that even as a very new beginner I want to learn more. Thank you for sharing 😊
Thank you so much! I'm so glad they are easy to follow. Thank you for watching! 🙂❤
Hi Terry, I am trying this resin soap today!! :)
Nice! Hope you have fun! Tag me if you post, please.
I love these soaps. I have done some resin stuff but it never occurred to me to use those techniques in soap! Genius.
thank you so much! I've got more resin-like ideas coming next month, hopefully! 😁
Mind if I ask, where did you get your mold?
Not at all! The loaf molds I found on Amazon and for me and what I make, they are SO useful! Here's a link to one that looks like it's the same- it's at least similar: www.amazon.com/Areej-Heavy-Instructions-Silicone-Lavender/dp/B07VWYSFHW/ref=sr_1_34?crid=2IFOXCR4BE3NN&keywords=silicone%2Bloaf%2Bmolds%2Bfor%2Bsoap&qid=1694989772&sprefix=silicone%2Bloaf%2Bmolds%2Caps%2C120&sr=8-34&th=1 🙂
So beautiful!! 🤩💕
Thank you! 🥰
Thank you for sharing your talent on your channel. I have learned so much. I tried this and the soap was beautiful. I tried it a second time but I used mica instead of activated charcoal and my soap turned out soft. Would using mica cause this?
First of all, thank you so much for watching and I am so glad you are learning from my channel! The only ways I could see mica causing a soap to turn out soft would be if you used a very large amount of mica and dispersed it in a very large amount of rubbing alcohol, and even then, the alcohol would eventually evaporate and the soap would harden. If your mica wasn't soap safe, perhaps there were additional ingredients, or you may have dispersed your mica in glycerin or in oil instead of alcohol, that may affect hardening. To clarify, I only use glycerin to disperse Activated Charcoal and Titanium Dioxide. I mix my micas in rubbing alcohol. Adding waxes, or adding too much honey can cause a soap not to set up. I sure hope I was able to answer your question and help you figure out the problem. Let me know if I can further help you troubleshoot. Thank you! ❤🙂
Thank you for your response. I didn’t think I used to much mica. I may have used to much rubbing alcohol so hopefully it will harden up. Thanks again so much.
Unfortunately, the resin soap did not work. At what temperature should you add the saran wrap to the soap and take it off?
Well, I add it right after pouring, and I don't pour it real hot, but a bit over the melting point of the soap, between 127-130 F. You don't remove the saran wrap until it's completely hardened and set up. It takes a while longer to set because it is covered. I'm sorry it didn't work for you. Let me know how else I can help.
Great...I took it off before it was completely dry. I will try it again. Thank you Terry:)@@msTsoap
Can you tell me please, do you get sweating with your mp soaps? and if so how do you deal with it? thanks so much 🙂
Hi, Lisa! I do get sweating sometimes, as I live in Florida, where it's humid as heck! The best thing is to avoid it altogether, by NOT overheating your soap base, NOT adding a bunch of oils or butters, NOT putting it in the fridge to cool, and NOT reheating too many times. IF it does happen, as it certainly can no matter how careful you are, you can spritz with 91-99% Isopropyl Alcohol & then wipe it off with a lint-free paper towel, you can also rinse in distilled water, then spritz with the same alcohol, and then in both of those cases, let dry in front of a fan or dehumidifier, rotating them to get every side. I spritz more than once, it helps the soaps form a slightly thicker "skin" on the outside, which can prevent the glycerin from attracting the water from the air. Some people just wrap airtight with saran wrap or shrink wrap immediately after they come out of the mold. I find that's just not enough here in the Swamps! 🤣 I "cure" them (which doesn't mean saponify, as some people think, but means allowing them to lose water weight) before I wrap them, usually with a fan & spritzing a few times with the RA. Hope that helps. I plan on doing a troubleshooting video some day, and I'll definitely include this, as it's a common problem. 🙂❤
Now that I answered, I'm not sure you are "Lisa"! I'm sorry, but when I looked at your question, I swear I saw "Lisa" somewhere! It's NOT there now! I'm so sorry! 🥺
Thank you. 🌹😊
You're welcome! Glad you enjoyed it! 🙂❤
I LOVE THIS!
Thank you so much! 🙂❤
Absolutely brilliant!!!💜💜💜
Thank you, Rose! 😉
Can you tell me more about the charcoal/glycerin?
Hi, Taryn! I mix my activated charcoal (made from coconut- the shells I believe), with pure vegetable food grade glycerin, at about a 3:1 ratio by weight. I'm sure you can mix it in with other things, maybe the fragrance oil- but I haven't done that. I've yet to have a problem adding glycerin in with my charcoal or with my titanium dioxide, when I use it. You may have to experiment to get the right amount for you and your soap base. Hope that helps, as I wasn't sure what you wanted to know! 😁 If this doesn't answer your question, just let me know! Thanks for watching! 🙂❤
@@msTsoap That's great - thank you !!
@@TarynDryfhout you're welcome! 🙂
Does mica get all over your hands since it is kind layered and not mixed into the soap? Would you use poly80 to help with any transfer issues and help it in water?
Mica will mix in with the suds as you wash and rinse clean away! A lot of people paint the tops of their soaps with mica, especially intricate molds with designs. Great question, though! 🙂🥰
@@msTsoap Always learning! Ty!
@@Signrmsigncs you're welcome! 🙂❤
@@msTsoapWill the mica stain the bath cloth while they’re using soap? I figure eventually yes, as they keep using the bath cloth. I’m wondering will customers get freaked out initially?
@@brendac8309 To be honest, it depends on the mica. I haven't had a problem with it, but I do tell my customers if they are buying brightly colored soaps, probably best NOT to use your best washcloths given to you by your Aunt Tilly at your wedding. LOL Also, rinsing well after tends to prevent staining. Hope that helps! Thanks for watching and commenting! 🥰🥰
WOW i love the way they turned out. And it seems fairly easy to do. Thank you for sharing and keep the videos coming.
Thank you so much! Really not difficult at all, very satisfying and I can't wait to do more! Thanks for watching!