Beyerdynamic DT990 vs DT900 vs DT1990 vs T1 open back Royal rumble Part 1
HTML-код
- Опубликовано: 25 июл 2024
- In part 1 I take a look inside to see what you get as you go up the range of Beyerdynamic's open-back headphones starting with the £129 DT990 and going up to the £899 T1 Gen 3
If you want to see a more in-depth tear down on any of these, check out our other videos.
00:00 Intro
02:03 Beyerdynamic DT990
04:46 Beyerdynamic DT1990
08:26 Beyerdynamic DT900 Pro X
12:38 Beyerdynamic T1 Gen 3
If you fancy a balanced or modded pair of any of these check out the link below
customcans.co.uk/shop/product... 
Наука
One of the very best videos I've seen about headphones :-)
Thanks ;)
Thanks for the review! The screensaver is just a bomb! We are waiting for the continuation, with measurements of frequency characteristics
Yeh - it should be up in a couple of days
good vid my man! looking forward to the 2nd part ✌🎧👍
BTW i'm very impressed with the dual entry balanced mod' you did on my 1990's & super fast service✌😎👍
Glad you like them - I will pass on your thanks to the team
So interesting to watch and listen to you "operate" on headphones! Looking forward to part 2..
Should be up on Tuesday hopefully
The HP king strikes again.😍 Thank you very much Sir.
No problem
Great video. I actually recently got the DT900 and have been impressed. I'd almost consider it a modern DT880 since the tuning sounds much closer to that than the more "V tuned" DT990. I think they struck a great balance between a studio/work headphone and one that's also just fun too.
Yes, I agree, they are a good all-rounder and will work with just about any equipment
BEST HEADPHONE CHANNEL 💯
Thanks ;)
Amazing video to show the interior design between the Beyers. Is there a significant difference between the DT990 editions and the DT990 Pros in terms of the ear cup designs?
The drivers are the same but the earcups are slightly different with different openings on the back. I have modded both but not directly compared them. I may hav e to do that in another video
@@CustomCans Ooooooh, a video would be fantastic! Thanks a lot:) Appreciate your great work
I have the 990 and the tesla 1990 and you can hear the difference as the 1990 is more precise. So, the 1990's is perfect for me using along side with Focal studio monitors Shape 65.
Yeh - the DT1990 are definitely a step up from the 990. They cost 3 or 4 times more but I think it is probablyt worth it if you have the money
@@CustomCans First of all, man, you're doing a great job, thank you! It's worth to upgrade, but it looks like the 'mighty' EU messed up the monetary system and now the prices are going up.
Great video. I have a 770 pro and a 990 pro. my question is, which one can i put the tesla driver in?
The 1770 or 1990 Tesla drivers would fit in either of those
I've been interested in adding some dampening to my DT 1990 cups. What benefits does this have on the sound? Would you consider adding a dampening kit for the 1990 to your shop?
Yes we will add that soon. We have temperately sold out of DT1990s but when we get our next batch in, I will work on a DIY kit
@@CustomCans Great, thanks I'll be looking forward to testing it out!
I always like the DT880 - was my first serious headphone as a wee 18 year old (after the Sennheiser 555 as a wee-er 15 year old)
I have gone through multiple pairs of them as their jack is non-detachable and I was not as careful with headphones as I am nowadays - maybe I should pick one up and have it modded by yours truly??
Can you stock the 600ohm DT880 and send them out with a nice detachable cable?
Would be interested in revisiting these headphones with an updated eye-popping headphone system!!
Cheers
looks like the DT1990 is similar soundwise nowadays.... maybe we should get that one modded with 4-pin mini-xlr? See you in a couple of months... :)
Yes, we have them in balanced
jfunk.org/wpc/product/custom-cans-uber-dt880-edition-headphones-with-modified-drivers-and-detachable-balanced-litz-cable-3-5mm-6-35mm-trs-jack/
Or single ended
jfunk.org/wpc/product/custom-cans-uber-dt880-edition-headphones-with-modified-drivers-and-detachable-litz-cable-3-5mm-6-35mm-trs-jack-copy/
@@CustomCans haha, you went for the 600 ohms also.. very cool also didn't even notice that
Title edit?..DT990 vs DT990 Pro X...👍 looking forward to your thoughts 😃
Don't get too excited... I had to split the video into 2 parts, this part is just taking a look at the drivers in each of them
What improvements are made to the 1990 by adding damping material?
it is pretty subtle... The 1990 are more like semi open so there is still a lot of sound bouncing around inside - if you can cut down those reflections a bit it sound slightly less "boxy"
Love my DT1990s, but I'm intrigued by the angled drivers in the T1s. I can't really justify a fifth pair of beyerdynamic headphones though.
🤔
If you love the DT1990 , I would stick with them. I have not tried it but you could stick some angled pads on them to get a little bit of the effect
@@CustomCans I'm looking at the angled pads I've just bought to replace the worn ones of my Audeze LCD2. I think it might be worth a try
There's no mention of diaphragm material and geometry.
This is important in loudspeakers, so why isn't it in headphones?
You are right, it is. We are currently in the process of designing some headphones and have been trying out different diaphragm materials and coatings. There are loads of stuff I missed in this but I squeezed quite a lot into 20 mins. We are planning on doing a video testing different driver designs and materials but it is a couple of months off being ready ... we are still trying to learn as we go along
@@CustomCans Looking forward to it. We get zillions of headphone reviewers, but nothing about the design process.Such as; is damping for the management of the acoustic space, or for taming diaphragm breakup? I would love to know.
One of the biggest negatives of Brexit was the effect its had on Beyerdynamic spares. Most spares just aren't available in the UK and they won't ship them to the UK. This has most likely had a big effect on prices of the headphones and their spares.
Yes, to be fare, we reduced the range of spares we carry for them as we could no longer make a profit on them. Thomann is often a good source and they ship to the UK
Sad Tygr 300R noises 😭
Ah.. Sorry, we did not have any on the shelf at the time.
what does ballanced do for you?
for me.... It lets me have two full time staff making balanced cables ;) If you want to know what it may do for you... I have an old video here that may help
ruclips.net/video/2bpX13gUJBI/видео.html
@@CustomCans 1x Balanced Beyerdynamic DT1990
£546.00
Convert Stock Cable - Yes
£6.00
Fit mass loading and damping kit - Yes
£18.00
Balanced connection type - 4 pin XLR Gold pins
-
Cable colour ( see colour chart in images ) - safety red
-
Balanced Litz Cable Length - 1.5m
-
Custom paint for the earcups and shoulders? - No - Standard Black parts
-
Fit Switchable Passive 8K Filter - Add Switchable Passive filter
£75.00
Subtotal £645.00
Thanks seems like a lot of work for what I would like am I reading right could buy them directly like this from CC
@@patricaomas8750 Yes, we normally have a couple of pairs in stock but they are built to order. They take a week or so to build so if you do order, you have to wait a little while for them to be made
@@CustomCans Thanks, saving my pennies no problem
Some Freddy Kruger vibes 😂
LOL :)