Pull the primary clutch off and i bet money the plastic shim/bushing teeth are stripped. Very very common issue on those rangers! You can put a Rs1 clutch on it and it wont ever have an issue again, or you can just replace the plastic bushing
So you can drill hardened steel. You just need a carbide drill. For your secondary bolt look for left hand drill bits 90% of the time it will back the bolt out
I’m not sure if you have tried getting a pick or flathead on the jagged edges of the bolt and spin it out. Had luck on a new 23 model at work when it happened it me, didn’t have any pressure left and spun freely out.
Any time guys! You always come out at the end with some badass units! Eventually when I get the extra cash I'm coming out to one of your shows who knows one day I might ride with the big dogs.
Step 1 cut gas line, step 2 park near open flame, step 3 enjoy a bonfire, step 4 call insurance 😂😂 just kidding, but a left handed drill bit and a super stable hand should do the trick!
I hate that you have some of my luck if I try to do something on my car or atv it’s always a problem with the holidays coming up the only family member I have is my brother my mom and dad have passed away but y’all have a good thanksgiving and I can’t wait to see your next video
Might need to weld a few nuts on that bolt for the secondary. After skimming it in 2wd with y’all down there at Busco Beach, my outlander has been super weird. From electrical to the wheeler taking off by itself because a piece of the throttle box for the cable broke off and got stuck in the 4wd switch. So I get the whole idea of things not going right. It happens.
I have used a pneumatic engraver to get broken bolts out. Just put the end of it on your broken bolt and start making circles and the vibration will some times but not all the time back that bolt out.
Belt box blower and clutches should take care of it if it’s happening on the road the belt probably get to hot and blows with the big tires and portals
Hey man I’ve been through breaking a secondary bolt off in the engine like that not promising it will work but I had the luck of putting a clutch magnet (the little clutch weights) put it on the end of a magnet try and spin it out there shouldn’t be any pressure on the broken off stud should come right out in a “perfect world” worth a shot I’ve seen it done
holler if need help, had to fix this before. get a sleeve that will fit in the hole and allow a bit in the center to center the drill bit and drill with left hand bit.
Hey bubba, not sure if it matters with the North Star, but in the highlifter it’s easier to take the airbox off to do that clutch cover. Also hate doing these Polaris clutches. Buddy and I been through a couple with that damn separating tool and breaking them, I’d get that STM setup
time to get rid of the north star and step your sxs game up. It is a nice sxs dont get me wrong but it is time joe, time to do you a build on a new sxs.
you said you were considering the new polaris...the one that looks like a ford bronco side by side....lol...but you know can am is better...maybe a commander@@336MudMafia.
Welp, I’ve always said if ya gonna be a bear, be a Grizzly!!! 40 lbs of torque uh, y’all sure y’all was reading that right?? 👓 just tack weld it, it’ll be alright???🤔
@@336MudMafia. been watching the channel for awhile brother! I know it’s not, just commenting cause I know it helps you and the video! 🤘🏼🤘🏼🤘🏼 Keep on keeping on brother. I know you’ll have the right back right in no time! I hope I get the chance to meet y’all and ride one day man! 🫡
We all mess up happens all the time 🤙🏻I know yall will get it fixed try to invest in a 3/8 drive torque wrench that 1/2 torque wrench had to much leverage kinda like putting a pipe on a small ratchet no hate just trying to give ideas 🤙🏻🤙🏻
If anyone has any tips or tricks for getting that bolt at…..all help is appreciated😅
336 MUD MIFIA THATS THE GANG BABY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
What’s up happy Thanksgiving
336 that’s the gang baby 🤟🏼🤟🏼🤟🏼 expensive fixes all the time
It’s something all the time🤷🏻♂️
That's why they recommend putting a new clutch bolt in whenever you pull the clutches. They do stretch and weaken
Yeah it is a stretch bolt! We didn’t think it was worn enough to snap though🤦🏻♂️
Well Joe, you know what to do…. Start that new build you mentioned in a previous video. Let’s go!!
Yeah, this might be a sign🤔
Happy Thanksgiving to you and your family and friends I really enjoy watching your videos
Thank you! Don’t eat to much!
Boys and girls ladies and gents I give you THE BEST DAMN MUD CHANNEL IN THE WORLD 336 THE GANG BABY LETS FKN GO !
Ayeee appreciate it you my man🙏🏼
get a smaller drill bit and drill into the bolt that broke off an back the broken pease that is in there
Happy thanksgiving 336 MUDMAFIA!!!! Love the content keep it come boys!!! 💪💪🔥🔥
Definitely going to try!
336 the gang baby
Yessuhhh🤘🏻
@@336MudMafia. appreciate the highlighted
Happy Thanksgiving to you and your family and friends I really enjoyed watching your videos jo and j$
That means a lot!
Pull the primary clutch off and i bet money the plastic shim/bushing teeth are stripped. Very very common issue on those rangers! You can put a Rs1 clutch on it and it wont ever have an issue again, or you can just replace the plastic bushing
Definitely look into that! Appreciate the info!
Have a good thanksgiving enjoy the vids❤
🙏🏼🙏🏼🙏🏼
So you can drill hardened steel. You just need a carbide drill. For your secondary bolt look for left hand drill bits 90% of the time it will back the bolt out
I really hope so🙏🏼 that’s what we went and bought😅
I can’t tell from your video but did you try removing and installing the secondary with the bolt installed to spread the secondary apart?
336 THATS THE GANG BABY
Your right about that😎
@@336MudMafia. when will you colab with Braydon price
I’m not sure if you have tried getting a pick or flathead on the jagged edges of the bolt and spin it out. Had luck on a new 23 model at work when it happened it me, didn’t have any pressure left and spun freely out.
We will definitely give it a try! Thanks man!
Awwww poor nothstar 😢😢
Happy Thanksgiving
We will get’er back right😎
I know yall will. Ive admired it since the beginning
@@krisbarras5110 🙏🏼🙏🏼🙏🏼
336 mud mafia with another banger video
You already know🤘🏻
You guys got it! You guys doing a amazing job! Got my support 💯
Thanks dude! Means a lot🙏🏼
Any time guys! You always come out at the end with some badass units! Eventually when I get the extra cash I'm coming out to one of your shows who knows one day I might ride with the big dogs.
Step 1 cut gas line, step 2 park near open flame, step 3 enjoy a bonfire, step 4 call insurance 😂😂 just kidding, but a left handed drill bit and a super stable hand should do the trick!
Well, that rules them two out!!!😂
That’s the goal, but finding someone with a steady hand is the problem🤦🏻♂️
Happy Thanksgiving to you and your family!! Love watching your videos keep up the good work!
Appreciate you🙏🏼
A mag drill would be a sure way to drill straight on a small bolt and a center punch is a must
I witnessed all this. I had to put on earmuffs...hahaha
Mhmmmm🫢
Use a left hand drill bit on the secondary bolt and it may spin out without a easy out or other extractor. Good luck!
Definitely going to try!
Yall Definitely Should Come To Trucks Gone Wild Next Year In April In Colfax Louisiana It’s A Wild Weekend
We have that on the list!
@@336MudMafia. Hellz Yeah Definitely Can’t Wait Yall Are Gonna Have An Awesome Fun Weekend
It would be a nice video if u can get some of the old gang hanging around.. im sure im not the only one wondering where is rest of the gang??!!
Your looking at the 2…..they drop like flies! They think they can hang and talk it up till it’s Time to perform.
I hate that you have some of my luck if I try to do something on my car or atv it’s always a problem with the holidays coming up the only family member I have is my brother my mom and dad have passed away but y’all have a good thanksgiving and I can’t wait to see your next video
Thanks man! Hope your thanksgiving goes well🙏🏼
Might need to weld a few nuts on that bolt for the secondary. After skimming it in 2wd with y’all down there at Busco Beach, my outlander has been super weird. From electrical to the wheeler taking off by itself because a piece of the throttle box for the cable broke off and got stuck in the 4wd switch. So I get the whole idea of things not going right. It happens.
Your right! It’s always something, we say….if it isn’t broke, it isn’t ours😂
Dang bro that sucks but definitely a banger video of behind the scenes hope y’all get it fixed and have a great thanksgiving💯🤘
Yessir! We are busy working on it now!
Sounds like the boys will be replacing an input shaft. Good luck 😂
I hope not🤦🏻♂️
I have used a pneumatic engraver to get broken bolts out. Just put the end of it on your broken bolt and start making circles and the vibration will some times but not all the time back that bolt out.
Belt box blower and clutches should take care of it if it’s happening on the road the belt probably get to hot and blows with the big tires and portals
That’s exactly what we were thinking!
Hey man I’ve been through breaking a secondary bolt off in the engine like that not promising it will work but I had the luck of putting a clutch magnet (the little clutch weights) put it on the end of a magnet try and spin it out there shouldn’t be any pressure on the broken off stud should come right out in a “perfect world” worth a shot I’ve seen it done
I will definitely give it a shot!
Dang that sucks! Best of luck getting it fixed
Definitely appreciate it! We need all the good luck we can get!
holler if need help, had to fix this before. get a sleeve that will fit in the hole and allow a bit in the center to center the drill bit and drill with left hand bit.
We finally got it out! Left hand for the win!
@336MudMafia. figured yall would. It can be discouraging for sure.
I know how you feel it's always something!! If you don't do anything, you can't break anything!! Keep up the awesome work 🙏🏻🙏🏻🙏🏻
Thanks my man! Your right, it’s always something🤷🏻♂️
@@336MudMafia. 💯 percent 👌
@@336MudMafia. have a Happy Thanksgiving
Hope you get it fixed joe 🔥 Sick video !!!💯🖤
gilomen tune and gilomen clutch kit and it will change the machine also get a clutch box exhaust fan and it will help that problem
Definitely going to look into all that!
That sounds a lot like my luck. I hate that for yaw hope it comes out easy.
Appreciate it my Man!
We need some motorcycle contact.
Coming soon to the 2nd channel😎
Sounds like it’s time for some full STM clutches from On Kill! 🔥
Hey bubba, not sure if it matters with the North Star, but in the highlifter it’s easier to take the airbox off to do that clutch cover. Also hate doing these Polaris clutches. Buddy and I been through a couple with that damn separating tool and breaking them, I’d get that STM setup
Great video guys good luck!! 👆🤘
🙏🏼🙏🏼🙏🏼
I hope you get it fixed soon so y’all can full send once again
Me and you both!
It is so funny one day u will be making some stuff and the next day I will be breaking it😂😂😂😂
It’s just a back and forth adventure all the time🤦🏻♂️
This is what we call a jackpot
336 that’s the gang baby
You already know my man🙌🏻
sorry man i hope you have a good thanksgiving
Same to you!!
What is the intro song?
That’s how it be sometimes, whole lotta work for a little bit of fun. When’s the merch restocking homies?
Soon! We’re just waiting on the people to finish making it all!
You also gave me the best birthday present a upload my birthday is today
Happy Birthday 🎉
Happy Birthday!
And also, you dont have to unbolt the secondary, just screw the tool in and it opens the secondary up to where you can pull belt off
Yeah we did and broke it off!
time to get rid of the north star and step your sxs game up. It is a nice sxs dont get me wrong but it is time joe, time to do you a build on a new sxs.
Like maybe an Xpedition build👀👀👀
Keep up the good content
Definitely going to try!
That’s crazy your secondary bolt is so small on my ranger it’s probably 3xs the size of that i always torque mine with a impact 😂
We were just trying to do it the proper way🤷🏻♂️
It’s the clutches
Good luck
It’s been a while since j brown has been apart of the mafia videos
He is doing his own thing
hey you guys should get a pit bike
We’ve got 3 of them!
Hood grief🤦♂️🤦♂️. Gotta get it fixed before the new years dog
I know it! Before the parade😅
It's official time to swap that thing out for can am
Ehhhh idk about all that….
you said you were considering the new polaris...the one that looks like a ford bronco side by side....lol...but you know can am is better...maybe a commander@@336MudMafia.
I can’t count the times a dang torque wrench has got me in a bind, better of to just go by feel
Right!? I figure it would have done alright but we were wrong🤦🏻♂️
What a beautiful machine
Yeah….that doesn’t move🤦🏻♂️
Dang that’s a crap day when bolts start breaking
Yeah and every single thing broke!
all i ever do is take my airbox cover off and the intake pipe and mine comes right off
This one definitely doesn’t!
You’re supposed to replace that bolt after you take it out!
happy thanksgiving! im so thankful for the gang! y'all have inspired me so much!🤍
Where the gold game at??
Under surgery right now!
Welp, I’ve always said if ya gonna be a bear, be a Grizzly!!! 40 lbs of torque uh, y’all sure y’all was reading that right?? 👓 just tack weld it, it’ll be alright???🤔
Yeah we checked all websites and diaphragms! Even called Polaris😅
Gold gade update?
I’m surgery🤫
Hope he gets it fixed
you know who the gang is dontchu?
Of course I do😏
336 that’s the gang baby
336 that's the gang baby
Of course I do
Polaris build ?
Hi my name is Chris I like your videos on t TikTok and RUclips
Of course something happens when you want 2 sell it for a new unit
Maybe it didn’t want to be sold🤷🏻♂️😅
That sucks when that happens
Yeah🥲
I like this video 📹 👌 just like me.
Polaris problems a story as old as time
🥱🥱
$75k for a SxS? 👀👀👀
I need to start making videos
Mhmmmm😅 trust me it’s not as easy as it looks!
@@336MudMafia. been watching the channel for awhile brother! I know it’s not, just commenting cause I know it helps you and the video! 🤘🏼🤘🏼🤘🏼
Keep on keeping on brother. I know you’ll have the right back right in no time!
I hope I get the chance to meet y’all and ride one day man! 🫡
Completely didn’t go in our favor…gonna do our best to get the northstar back right🙏
I can only hope we get it back right😅
We all mess up happens all the time 🤙🏻I know yall will get it fixed try to invest in a 3/8 drive torque wrench that 1/2 torque wrench had to much leverage kinda like putting a pipe on a small ratchet no hate just trying to give ideas 🤙🏻🤙🏻
My bad saw it’s 3/8😂😂 maybe they make a shorter one ?
Who's the gang
Pretty sure it’s 336😏
@@336MudMafia. Yeah I think it might be
What’s up
Hi
letsssssss goooooooo
🔥🔥🔥
Let's go
Wassup
Yoo
Can ams better lol
First
1st
Happy Thanksgiving. Did you now that my phone number has 336 in it
336 that’s the gang baby
Yuh Yuh🤘🏻