Man ive been looking at your channel since around 1k, youre absolutely great. Keep powering through lad, youll make it! Originally got here for the keyless go install
Hiya Finn, cheers for the continued support. I will deffo keep at it all the time people.are enjoying what im doing. The ST220 will be as good as new by the time ive finished.
Thank you for this video it helped me a lot. The second video helped me all the time. To continue like this is a good job. Thank you. From a French =). 1 more subscribe.
Hi, glad the vids help. Thats why i make them to try and help others out and save some pennies. I will try and keep up with the good content and thanks for the Sub, dont forget to share with your mates. Thanks again
Great videos mate my st 220 has a knocking sound when I reverse and let my foot off accelerator seen some videos and could this be drive shaft I don’t normally work on my cars but with the labour costs at garages and good videos I will start doing a few odd jobs
Awsome video dude. I did notice your metal ball joint covers on the lower arm, good idea 💡 may I ask where you got them as a Google search didn't bring much up.
@@johnathanfoulkes2547 cheers mate. Glad there helping. I do my best to get the best angles to make them easy to follow. Be sure to share with your mates
Hey Chazz I've been watching your videos showing the replacement of passenger side driver side cv axel assembly. I have a 2005 x-type and from what I can gather your vehicle is pretty much the same. I purchased both sides but the drivers side (passenger side US) is a complete assembly. I can't split the inner axel from the rest of the assembly. I purchased from Rock Auto and assumed they would send me exactly what you have here. From what I've read your not supposed to remove the entire assembly because you could damage the transfer case gaskets. Do you know if that's true and if so could I leave the current inner shaft with bearing housing in place, remove the existing boot and insert the new tripod/tee bearings into it with new boot? I know this is a lot to ask. Just looking for some guidance.
Thanks you for your videos, these are very hepful for everyone, Do you know if this drive shaft is compatible with 6 gears? because i have difficulty to finding it. Thanks you
@@horsestuff9854 ruclips.net/video/3hR1C7AsdsU/видео.html in the vid discription there is a link tonthe tool. How ever tomorrow i will put a link in this vid too
Man ive been looking at your channel since around 1k, youre absolutely great. Keep powering through lad, youll make it! Originally got here for the keyless go install
Hiya Finn, cheers for the continued support. I will deffo keep at it all the time people.are enjoying what im doing. The ST220 will be as good as new by the time ive finished.
Thanks Chazz for another year of great videos, may you and your family have the best Chrismas ever. Stay safe.
You are most welcome, thanks for the continued support. Have a good one and stay safe.
Good job. That barring tool is a beast 😁
Great video. Thank you. It will help me to do this on my ST200. I hope they are about the same
I gonna do it on ST200 estate as well next week 🤞🏻
Nice work bro its going to run wheel smooth
Hahaha wheely smooth lol
There is a slot at the back of the suspension ball joint, isn't it easier to spread it to get the ball joint out?
Mulțumesc pentru informații!
Thank you for this video it helped me a lot.
The second video helped me all the time.
To continue like this is a good job.
Thank you.
From a French =).
1 more subscribe.
Hi, glad the vids help. Thats why i make them to try and help others out and save some pennies. I will try and keep up with the good content and thanks for the Sub, dont forget to share with your mates. Thanks again
Hi Chazz did you change the intermediate driveshaft bearing? cheers
Merry Christmas.
Great videos mate my st 220 has a knocking sound when I reverse and let my foot off accelerator seen some videos and could this be drive shaft I don’t normally work on my cars but with the labour costs at garages and good videos I will start doing a few odd jobs
Hello, why did you replace the driveshaft?
Congratulations for the video again
Slowly replacing and restoring the car.
Awsome video dude. I did notice your metal ball joint covers on the lower arm, good idea 💡 may I ask where you got them as a Google search didn't bring much up.
they was already on the car mate. If i find some i will share them with you. Or you could try this site ford.7zap.com/en/car/
1692134 type this number in on ebay there is one for £6
Sweet man, thankyou, awsome videos BTW. They have got me through some scrapes for sure
@@johnathanfoulkes2547 cheers mate. Glad there helping. I do my best to get the best angles to make them easy to follow. Be sure to share with your mates
Did you do a video changing the intermediate bearing?
Hi.Chazz...I have 2002 2.5L Mondeo I cant find fuel injectors...One fuel injector is leaking time to time..start up hesitation,misfire etc,,symtoms..
On the petrol there on a rail under the upper inlet manfold.
Hey Chazz I've been watching your videos showing the replacement of passenger side driver side cv axel assembly. I have a 2005 x-type and from what I can gather your vehicle is pretty much the same. I purchased both sides but the drivers side (passenger side US) is a complete assembly. I can't split the inner axel from the rest of the assembly. I purchased from Rock Auto and assumed they would send me exactly what you have here. From what I've read your not supposed to remove the entire assembly because you could damage the transfer case gaskets. Do you know if that's true and if so could I leave the current inner shaft with bearing housing in place, remove the existing boot and insert the new tripod/tee bearings into it with new boot? I know this is a lot to ask. Just looking for some guidance.
Thanks you for your videos, these are very hepful for everyone, Do you know if this drive shaft is compatible with 6 gears? because i have difficulty to finding it.
Thanks you
Chazz have you change a intermediate driveshaft bearing? Thanks
I am going to be doing that in the next couple videos
Is it worth putting new seals in while you have it out?
I did just just forgot to film it, i did film the passenger side seal
What brand driveshaft was it i need to do this on mine not sure what one to get
Hiya I got J&R the link is in the vid discription
hi were did you get that tool for compressing the spring is there a name for it ?
Hiya ive forgot to put the link to the compressor springs but will do it later.
Hi sorry think you misunderstood wats the blue tool you used to lift up the hub to release the wishbone
@@horsestuff9854 oh the wishbone lever tool. Yeah in the last vid there is a link to get one. I will put the link here for you
@@horsestuff9854 ruclips.net/video/3hR1C7AsdsU/видео.html in the vid discription there is a link tonthe tool. How ever tomorrow i will put a link in this vid too