From the Restored Axe to the Axe of the Scandinavian Viking Leader - restoration
HTML-код
- Опубликовано: 11 июн 2024
- Hello everyone In the last video in my workshop called - Restoration of a dead axe into a Small axe Brodaks - with their own hands, restoration - • Реставрация МёртВого Т...
I took up an old and dead rusty axe. This axe for restoration was brought to me from the village, where it lay for many years, like a rusty piece of iron. I cut off a little extra and re-welded it, and now it's a new little hatchet. To restore the old axe, I needed to cut, weld with a welding machine, strengthen the walls of the eyelets, sand, file, remove rust, anneal, harden and release the axe. A lot of work has been done…
In the same part, I decided to make a conversion from a simple axe with my own hands into an axe for the Viking leader, the king. During the restoration of the axe, I decided to carry an ornament in the style of Scandinavian patterns, consisting in intricate interlacing lines, personally, this style of drawing fascinates me with its beauty, so I did this work with great pleasure. Who wouldn't want to immerse themselves in the times of conquest and travel?
And so I sanded the restored axe from outright junk with sandpaper and immersed it in a solution of iron chloride, after that the axe was painted to carry the drawing. As soon as I drew the drawing on the axe for the leader, it's time to remove the excess paint. With an awl, I remove the paint from the places where I was going to remove excess metal. When I'm done with the ornament, I give the Scandinavian drawing volume by electrochemical etching. After this process, I wash my axe with water and soda. I also decided to complicate the pattern on the axe a little and took off a little extra paint and lowered it back into the chlorine iron to smooth out the edges of the drawing. Solvent washed off the remaining paint, washed, cleaned, sanded. Next, it's time to raven the hatchet to give an aesthetic appearance. Following the instructions, I blackened the metal and sanded it. At the last stage, with a felt circle and polishing paste, I brought my work to the final result. I was very pleased with the result of my work, and I hope you have the same opinion. Thank you..)))
I used the following tools and substances: Salt, soda, ferric chloride, acrylic paint in a balloon, a means for blackening metal, tracing paper, pencil, awl, ruler, angle grinder, drill, grinder, polishing grinder, sandpaper.
00:00 Start - axe after restoration
00:19 Sandpaper grinding
00:25 Etching of the workpiece in ferric chloride
01:01 Painting an axe with paint from a balloon
01:16 Translation of the drawing using tracing paper on an axe
02:08 Drawing of the translated drawing
02:55 Recreating the drawing for its further etching
04:07 Etching of a pattern on metal by electrochemical method
05:12 Working with a drawing supplement
05:37 Back in the chlorine iron
06:27 Washing off the paint with an axe solvent
06:54 Stripping, grinding, sharpening of the blade
07:58 Blackening and blackening of metal
08:29 With fine sandpaper I give the ornament a color contour
09:08 On the polishing wheel, I bring the axe to the finish line
09:37 A ready-made axe with a Scandinavian pattern for a Viking
10:18 The final screensaver with links to my other works
Dear friends, if you decide to repeat what you saw. Do Not Forget - observe Safety Precautions. Gloves, mask, glasses, etc.
An exclusive Axe made from the Most Ordinary Axe. DIY DIY - alteration 👉 • ЭксклюзиВный Топор из ...
An axe handle from an Axe handle for 78 rubles for an Axe from an Axe with your own hands. Homemade - Alterations👉 • Топорище из Топорища з...
🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝
If there is an opportunity to support me, I will be very grateful!!! These funds will be used for consumables, tools for more complex work, and a little for cookies for tea ... Дон
Donat - www.donationalerts.com/r/miha...
🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝
thank you!
Мой My/my Yandex Zen 👉 zen.yandex.ru/id/5ff9a7a05981...
Мой My/my instagram 👉 / mihailkupec
Мой My/my TikTok 👉 / mihailkupec
Мой My/my RUclips 👉 / @mihailkupec restoration 
Хобби
00:00 Начало - топор после реставрации
00:19 Шлифование наждачной бумагой
00:25 Травления заготовки в хлорном железе
01:01 Покраска топора краской из баллона
01:16 Перевод рисунка с помощью кальки на топор
02:08 Прорисовка переведённого рисунка
02:55 Воссоздание рисунка для дальнейшего его травления
04:07 Травление рисунка на металле электрохимическим методом
05:12 Работа с рисунком дополнение
05:37 Снова в хлорное железо
06:27 Смывание краски с топор растворителем
06:54 Зачистка, шлифовка, заточка лезвия
07:58 Чернение и воронения металла
08:29 Мелкой наждачной бумагой придаю орнаменту цветовой контур
09:08 На полировочном круге довожу топор до финиша
09:37 Готовый топор со скандинавским рисунком для викинга
10:18 Конечная заставка с ссылками на другие мои работы
Дорогие друзья, если Вы решили повторить то, что увидели. Не Забывайте - соблюдайте Технику Безопасности. Перчатки, маска, очки и т.п.
Шикарная работа!
Восторг!
Спасибо... 🤝
Magnifique travail comme toujours !!! Est ce que vous re utilisez le chlorure de fer après chaque gravure ou vous le recyclez ? Concernant les bains de chlorure et d'électrolyse ce serai pas mal si vous mettez sur la vidéo le temps qu'ils ont trempés afin d'avoir une idée . Bonne continuation
The gretest work i have EWER Seen!
From a fellow Axe/knife Builder👍🇩🇰
🤝🤝🤝
@@MihailKupec I have finely found " The way to do it propper" So thanks for showinig a lot of vidio's. I kan redde Kyrillik so I cut read the lyriks on the ( stuff) But thanks for the way to make propper ( Pappern) 👍😉
@@sandykristensen8099 Very glad to meet like-minded people. I would like to visit your facebook page, but I am from Russia, it was blocked from us, like instagram. I'm glad that you liked my work. Thank you!
Молодца ! Комент в развитие канала
Спасибо!🤝
А зачем перед покраской травить в хлорном железе?
Настойчивость вознаграждается. А зачем травить в хлорном железе перед покраской?
Nice work! What liquid is it at 08:00 to make the brackground so black? Thanks for your response!
Привет, а почему используется два способа травления электро и хлор? Почему не хлорное только?
Bonjour Monsieur avez vous un PDF de vos gravures ??