*This is my second WEN tool and they are both great **MyBest.Tools** I needed to do some trim work around the house and needed a scroll saw for the intricate work. No complaints so far.*
Thanks for the video. Read all the reviews and questions on Screwfix but this video made up my mind. I'm used to using an industrial one in work but I'm looking for one for my home workshop for my own youtube videos. Off to order one. Thanks again 👍🏼
open it up and look at the electronics. the large wires that come out of the machine are met with really small ones wrapped around a choke coil. and mains voltage is going through very small wires through the chassis to the light. i removed the tiny wires, re-wrapped the choke as well with heavier (insulated) stranded copper wire suitable for mains voltages. the soldering work in the light's electronics enclosure was very sloppy, and frayed wires were to be seen. the very small main voltage wires leading to the main switch end in crimped terminals, and the crimp failed on just a little pull because the wires are too small to be inserted into a crimp terminal. i found all this because i wanted to re-order the logic so that way the light would be independent of the motor. next i will add a foot switch, and eventually figure out how to speed up the blade change process with pinless blades. i got sad thinking about the people in the chinese factory making these, because the work indicates fatigue or lack of skill. be safe!
J_ G_ thanks for the comment J_G_ a few days ago the scroll saw started smoking from the motor i think so i took it back to the shop scheppach said the would try and fix it but could not fix so sent me a brand new one the new one is a bit diffrent than the one in the video. The new one has a adaptar for the pinless blades what you put on the machine instead of it being fixed to the machine like the one in this video if that makes sense. Agian thanks for your comment i am not very confident with electrics its a good idea to have the light work without motor running it will make it easier to see when feeding blade through your work and blade changes and quicker blade change would be good have a good day J_G_
In questo traforo la difficoltà è rappresentata dal cambio delle lame perchè occorre togliere il carter laterale per poter accedere al morsetto inferiore
Mike Bernard thanks for your comment but i have a voice for the deaf and a face for the radio mike. Sorry mike I will have to try speaking next time i do a video thanks again for your comment 👍
well at least you honest, Listen im about to buy this machine for £129 am i waisting my money,,,, i need to be able to change blade quite often is it east to change pin head blades, cheers
*This is my second WEN tool and they are both great **MyBest.Tools** I needed to do some trim work around the house and needed a scroll saw for the intricate work. No complaints so far.*
Big like!👍👍👍👍👍✅💪Felicitări! Great video 👍👍👍
Thanks for the video. Read all the reviews and questions on Screwfix but this video made up my mind. I'm used to using an industrial one in work but I'm looking for one for my home workshop for my own youtube videos. Off to order one. Thanks again 👍🏼
VIDEO SEMPLICE MA EFFICIENTE.
SALUTI
SALVIO
Hi Eco,
How satisfied are you with saw blade diver? I mean do the pinless blades loose many times during the work?
Is it a pain to change the pinless blades?
open it up and look at the electronics. the large wires that come out of the machine are met with really small ones wrapped around a choke coil. and mains voltage is going through very small wires through the chassis to the light. i removed the tiny wires, re-wrapped the choke as well with heavier (insulated) stranded copper wire suitable for mains voltages. the soldering work in the light's electronics enclosure was very sloppy, and frayed wires were to be seen. the very small main voltage wires leading to the main switch end in crimped terminals, and the crimp failed on just a little pull because the wires are too small to be inserted into a crimp terminal. i found all this because i wanted to re-order the logic so that way the light would be independent of the motor. next i will add a foot switch, and eventually figure out how to speed up the blade change process with pinless blades. i got sad thinking about the people in the chinese factory making these, because the work indicates fatigue or lack of skill. be safe!
J_ G_ thanks for the comment J_G_ a few days ago the scroll saw started smoking from the motor i think so i took it back to the shop scheppach said the would try and fix it but could not fix so sent me a brand new one the new one is a bit diffrent than the one in the video. The new one has a adaptar for the pinless blades what you put on the machine instead of it being fixed to the machine like the one in this video if that makes sense. Agian thanks for your comment i am not very confident with electrics its a good idea to have the light work without motor running it will make it easier to see when feeding blade through your work and blade changes and quicker blade change would be good have a good day J_G_
What a clumsy guy, he could have cut through his fingers many times, totally irresponsible workmanship.
In questo traforo la difficoltà è rappresentata dal cambio delle lame perchè occorre togliere il carter laterale per poter accedere al morsetto inferiore
Hi. Can it works with 127mm saw blade?
Boa noite onde comprar está Serra Tico Tico de bancada
Hy, can I use both pin or pinless blades? Thank you for the answer 😊
Stan Andrada yes you can use both pin and pinless blades on the saw i have only used pinless and they work fine stan
eco donkey Thank you! ☺
Stan Andrada your welcome
Fai vedere come si cambia il seghetto nel morsetto inferiore!!!!
some commentary would have been helpful!
Mike Bernard thanks for your comment but i have a voice for the deaf and a face for the radio mike. Sorry mike I will have to try speaking next time i do a video thanks again for your comment 👍
well at least you honest, Listen im about to buy this machine for £129 am i waisting my money,,,, i need to be able to change blade quite often is it east to change pin head blades, cheers
piuttosto rumoroso
ABBIATE LA TESTA(QUELLA CHE VI TROVATE SUL COLLO)DI METTRE IIL TRAFORO IN PIANO PRIMSA DI FARLO VEDERE:!!!!!!
Quantio costa e chi lo vende in italia
N7
E' una prova fatta male!!