Im actually a HUGE fan of the 25 minute videos, the details are much more in depth like i genuinely feel like i could tackle the same project and use the video as a tutorial where as the 15 minute videos some of the monor details that can make a big difference tend to get left out. But then again you tend to upload alot more often then most doing the q5 minute bits so idk man either way keep the great content guys
New subscriber.......you guys should use a Kohler V-twin in that drag bike ....Midwest fabrication builds them for the mini tractor pulls , they pump out 160 h.p. @ 12k rpms............ARC Racing builds a pretty nasty Predator V-twin too......you should do an episode wearing Florsheim Zipper boots.....
you guys r soooooo coooool love your videos i wish i was half as smart as you are i would be happy but i can only do so much cuz im stuck in a power wheel chair
you should build a 670 or equal drag mini bike, and call out Cars and cameras and the Green machine. would be good incentive for them to get it going again and a good show of your guys frame and engine skills.
hey redbeard, on your ultra lite drag mini bike you should use some sort of mixed metal to get the best strength to weight ratio. just a thought though idk if you can even weld the stuff lol
Hey RB are u guys gonna build it for the 1/8 mile or 1/4 and what is your mph goals. Another thing is are u gonna run a torque converter? If so are u gonna install different stall springs and weights in the driven pulley?
Spending a little time making a frame jig is worth it beings your making more then one and a dampener would be advised at the speeds you want to achieve!
When you get this done, you should have a minibike drag race. I have a dedicated drag only bike I’d like to run, but organized drag races are kinda uncommon.
How is that starting a rivialary thats what you do when you build something fast you race, it would be cool just to see who could build the faster motor and lightest frame
@customvideo454 In general, I do agree with the root of your point. The comment section of all the youtube cart/bike builders is rife with "fans" talking trash on C&C, RBG, and a bunch of others... for literally no reason. Common complaint I read is "so and so copied such and such's build they just did." K. Who the F cares if two channels built the exact same bike/kart? GUARANTEE you they did it differently, probably used different parts, and a different approach.... and I enjoy watching ALL OF THEM. That said... it would be fun to see C&C and RBG do a build off. I mean - They kinda did at the Texas swap meet, and that was quite fun to watch!
How can there be so many first when the definition clearly says, "coming before all others in time or order". Does that not mean only ONE can be first??? Yet, there are so many claiming it.
@@nzzs203 as a master of the oof I declare this comment a high quality sleeper oof as it is a important comment in an environment of laughter and jokes - oof
You [ just like Cars and Cameras ] have mentioned that we 'get bored' with longer clips. Ask Joe Rogan's audience... or Bad Obsession Motorsports. That is old thinking, or some crap that YT is feeding you through 'analytics'.
Sooo,It's going to be black with pink lace accents in the paint,so it's in 'drag'?Those frilly dangle things in the handlegrips?I kid of course.This will be Butch...or something else rugged,and fast as heck,once you drop a smaller sprocket on the tire.30 Tooth/?,with the output a 12t should get you 60mph,at least,with that small diameter tire.
I will have to say there's nothing better than Watching Two Brothers work together nothing better than brotherly love
When ur wife giggles mine does too. Lol. We're ready to see the drag bike drag. Good luck.!
Ahh...left-handed..and creative genius. God Bless Brothers in Christ.
I like the longer videos personally.
I was not happy when this video ended lol. Love RBG!!!
That is beyond sketchy... I LOVE IT!!!
I like the long vids with lots of things done.
I’m ok with 20 min videos, get to see more. I’ll still watch if it you shortened. Love the build it looks like a good one in the works.
Im actually a HUGE fan of the 25 minute videos, the details are much more in depth like i genuinely feel like i could tackle the same project and use the video as a tutorial where as the 15 minute videos some of the monor details that can make a big difference tend to get left out. But then again you tend to upload alot more often then most doing the q5 minute bits so idk man either way keep the great content guys
It's about dang time for a dragbike build
Never get bored watching your guys videos love watching wish they were longer
Thanks for sharing!
😇🙏👍
After seeing you guys in action on other minibikes, im not so sure you need a drag bike? LOL!But ill be happy to watch at your expense lol.
New subscriber.......you guys should use a Kohler V-twin in that drag bike ....Midwest fabrication builds them for the mini tractor pulls , they pump out 160 h.p. @ 12k rpms............ARC Racing builds a pretty nasty Predator V-twin too......you should do an episode wearing Florsheim Zipper boots.....
I'm staying tuned on this one building my Nitro 50 drag mini now so I'm interested in seeing what all you guys do keep up the good work great videos
you guys r soooooo coooool love your videos i wish i was half as smart as you are i would be happy but i can only do so much cuz im stuck in a power wheel chair
Oh yeah, this is gonna be a fun one... nice work guys, looking forward to seeing it run.
Brilliant as always !!!
God Bless, I like that! good to hear people say it these days. cool build, looking forward to seeing it done
you should build a 670 or equal drag mini bike, and call out Cars and cameras and the Green machine. would be good incentive for them to get it going again and a good show of your guys frame and engine skills.
I l like that comment you weld the Grand Canyon sick build btw
Awesome build
Have so many projects it seems like lol, excited for this one mostly cause I'm into drag racin
Somebody got the right idea for a build
I use a 1" split lock collar to mark my cut line all the way around the tube
1:37 Woah there buddy 😏
Ohhh here we go....... this is going to be great
15-20 minutes is perfect
This thing will be super cool. Btw, I'm all about the 20-25min videos, personally. I know- You can't please everyone. :)
hey redbeard, on your ultra lite drag mini bike you should use some sort of mixed metal to get the best strength to weight ratio. just a thought though idk if you can even weld the stuff lol
I'm not bored. U can make them as.long as you want..
Hey RB are u guys gonna build it for the 1/8 mile or 1/4 and what is your mph goals. Another thing is are u gonna run a torque converter? If so are u gonna install different stall springs and weights in the driven pulley?
That rear wheel held onto the axle tube only by the keyway?
Looking sweet man
I just love the opening when lonnie bust's his ass on the dirt..LOL
I like the longer videos
Spending a little time making a frame jig is worth it beings your making more then one and a dampener would be advised at the speeds you want to achieve!
Cool build.
This is gonna be badass
💪😎👍
When you get this done, you should have a minibike drag race. I have a dedicated drag only bike I’d like to run, but organized drag races are kinda uncommon.
She’s gonna glideee
I think u two should dual it out
I have an all organic 6" jack shaft tube. Anyone wanna see?
I mean 5:02
hope you get a stearing dampener for it. going over 80 is sketchy
This^^
I have 2 on mine... very important
Both my street bike's have them. Had a buddy loose his life because of a death shake. He had no sabalizer on his busa.
@@bryanroupe8646 sorry to hear about that bub
I wouldn't even contemplate it for a build like this. Completely unnecessary.
For 'bling' purposes, sure.
Come on greg weres the safety glasses.your teaching kids my grandson brought this to my attention.
How do you like the portable bandsaw from Harbor freight ?
Love it so far 😍
I love the videos
like the longer vids
You going to be the one riding the super light frame bike? Might want to think twice about the thin wall tubing.
“I had it on cold fusion mode”😂😂😂
Fricken awesome bud 🤘🏻👍🤘🏻
what type of welder are you using?
The longer the video the better
*cough* c&c vs rbg *cough*
customvideo454 no I just want to see them race. Not trying to start a rivalry at all.
How is that starting a rivialary thats what you do when you build something fast you race, it would be cool just to see who could build the faster motor and lightest frame
dustin Davidson EXACTLY. If it’s a drag bike then it should be in a DRAG RACE
unemployable ikr
@customvideo454 In general, I do agree with the root of your point. The comment section of all the youtube cart/bike builders is rife with "fans" talking trash on C&C, RBG, and a bunch of others... for literally no reason. Common complaint I read is "so and so copied such and such's build they just did." K. Who the F cares if two channels built the exact same bike/kart? GUARANTEE you they did it differently, probably used different parts, and a different approach.... and I enjoy watching ALL OF THEM.
That said... it would be fun to see C&C and RBG do a build off. I mean - They kinda did at the Texas swap meet, and that was quite fun to watch!
More cold fusion!
How do I make or where do I find rear axle spacers
Use some 1 pipe to slide over the axle
what steel do you use
Why not use Chrome Moly tubing?
Hey quick question where did you get the frane
First comment. Looking forward to this build
Are you gonna put a 40 series on it
Are you putting nitrous on it ????
You are my favorite youtuer
Iv been waiting for this
Epic build
Mini drag week?
Good idea? I guess we'll see.
I have already seen this cause I follow Greg on Instagram...you should too!
#SMALLENGINENATION
I literally started build my own today I'm use a pocket rocket frame with a predator 212 with a torque converter and a 6in wide racing kart wheel
I’m hoping someone will build a Bonneville Salt flats fastest mini bike 😁
Where did you find that tube notcher?
He made it
If u sell it let me know what u want im in indiana
Indiana born and raised
Nice im in nwi close to lake michigan
Same bout 45 from south bend
I'm in Michigan
That rim and tire combo in your parts list are completely different sizes .... I’d edit it for the right sizes
RBG is there no Merch store?
Im building one with a Wisconsin engine and a jr dragster slick
Plis
Show man
those are freestyle pegs.
Brandon may need a new hood if he cant see much while mig welding.
Fourth yesss
didn't know you were a lefty until today. me too.
How do you become a patreon supporter?
Helio poner treduction lspañis
We make a good team broskie
check out Detroit hood TV ,great mini-bike racing
carbon fiber frame rails
Tan version of the Ernest P Worrell shoes lol
Next Monday..... welding the grand canyon shut
"OWWW, hot in my ear!" lol
First view
Wats up Red
Shout out plz notification bell is on
Me too!!!
@@marksshop3029 mine is for you and red beard
I would rather have long videos
FIRST
How can there be so many first when the definition clearly says, "coming before all others in time or order". Does that not mean only ONE can be first??? Yet, there are so many claiming it.
@@nzzs203 as a master of the oof I declare this comment a high quality sleeper oof as it is a important comment in an environment of laughter and jokes - oof
Me crying inside that they cut up a shiny new axle
Cutting and Grinding with No safety Glasses on! BIG No No Otherwise cool project
Guys put some fucking safety glasses on Jesus!
Edit At least he's got them on top of his head
Get a new chop saw blade
You [ just like Cars and Cameras ] have mentioned that we 'get bored' with longer clips. Ask Joe Rogan's audience...
or Bad Obsession Motorsports.
That is old thinking, or some crap that YT is feeding you through 'analytics'.
Sooo,It's going to be black with pink lace accents in the paint,so it's in 'drag'?Those frilly dangle things in the handlegrips?I kid of course.This will be Butch...or something else rugged,and fast as heck,once you drop a smaller sprocket on the tire.30 Tooth/?,with the output a 12t should get you 60mph,at least,with that small diameter tire.