@@dannyaiello2648 No, because I just installed the lowering springs. Not sure if my buddy needed anymore hardware for the alignment to be done correctly. The alignment is not part of my install. Sorry for the late response, just saw this comment.
I went with Mopar performance lowering springs because being a Mopar part they do not affect or void the factory 10 year 100,000 mile warranty on any suspension parts including the struts! So IMHO it was a no brainer.
I have a 2013 300c Varvatos edition with Mopar lowering springs.Take a little while for them to settle in but I would guess about 1 1/2 " lower than factory height.
Good vid. Thanks for posting man. Helped me out a lot. I ended up only taking off the tie rod and upper control arm connection. That upper connection was a pain in the gas. I bashed the shit outta it with a 5 lb mallet and wouldn't budge. I ended up going to O'Reillys and borrowed a tool called a pitman tie rod puller. They had two sizes and that shit worked like a charm. Popped right off. So the left front took 3 hours. Right front, 30 minutes. Lol. Anyhow, thanks for the info bro
Save up and get some dude it’s worth it. Also if turning bolts not your thing that’s cool to. Just make sure the shop you take your ride to is a reputable one.
I got d2 springs...an I'm starting to think I should've went with coilover ...most alignment spot was telling me I'm too low to even align it wasn't a good experience
I would definitely go with coilovers. Better all around setup. Coilovers come with the strut that is actually made for the lower ride height. Springs just make it so your car is low but you get no real benefits from it other that your car looks lower. Coilovers you get the appearance and better handling.
Yea I’m always looking and willing to learn better and faster ways to do installs. Would you have a video of how you did your lowering springs on your Dodge Charger?
@Mushari Alqahtani not sure but if you go to the website and put in your vehicle info, the website should show you all the applications for your vehicle that they have.
Do you necessarily have to take the caliper pretty much apart just to get to the srut lol it’s literally the 3 bolts on the top and two bolt down low to have it off from what I just experienced
Hey bro id like to do this. I just got this car and was wondering if you could make a video showing the jacking points and where to place jack stands? The manual doesn’t say much
@Mushari Alqahtani Oh, I have it in my Amazon store (direct link to my Amazon store is in my video descriptions, And/Or "About" page & also the Amazon icon is on the banner at the top of my page). The Godspeed lowering springs is listed under the "Car Add-Ons" category. Hope this helps.
Will be a hundred percent transparent I didn’t measure before hand but this was on a v6 and afterwards it looked as low as a scat if that can helps. It was more than a 1 inch drop though.
Will did a great job on my 300S I love the new look and it handles so much better in cornering. I didn’t lose much ride quality she still rides sporty
Thanks I appreciate that bro
Looks great, helpful video! Thinking about doing godspeed on my 2014 300. Were you able to get an alignment to spec without any camber/castor kits?
Hey got the suspension part # for the Godspeed springs?
@@dannyaiello2648 No, because I just installed the lowering springs. Not sure if my buddy needed anymore hardware for the alignment to be done correctly. The alignment is not part of my install. Sorry for the late response, just saw this comment.
@@steeldog173No I don't. Sorry for the late response.
I went with Mopar performance lowering springs because being a Mopar part they do not affect or void the factory 10 year 100,000 mile warranty on any suspension parts including the struts! So IMHO it was a no brainer.
Thanks for the info.
T.T same reason I have em on my 2013 300c Varvatos edition.About how much lower once springs settled in? I went about 1 1/2" lower.
@@missayawk About 1".
Good video you helped me drop my 300 🙏🏼
Thank you! Awesome, glad I could help.
I learned a lot from this video 🙏🏾
Thanks for the view and comment. I’m glad I was able to provide some insight on how this can be done.
I have a 2013 300c Varvatos edition with Mopar lowering springs.Take a little while for them to settle in but I would guess about 1 1/2 " lower than factory height.
I saw the video and I put it together. Thank you. That's a lot of help.
Thanks for the view and I’m glad the video helped with your install.
Good vid. Thanks for posting man. Helped me out a lot. I ended up only taking off the tie rod and upper control arm connection. That upper connection was a pain in the gas. I bashed the shit outta it with a 5 lb mallet and wouldn't budge. I ended up going to O'Reillys and borrowed a tool called a pitman tie rod puller. They had two sizes and that shit worked like a charm. Popped right off. So the left front took 3 hours. Right front, 30 minutes. Lol. Anyhow, thanks for the info bro
Wow, that's crazy. You're welcome!
Hey boss thx for the vid, was really helpful! Have a blessed day!
Appreciate the comment. Glad it helped.
🔥🔥🔥🔥🔥🔥
Nice job! 👍🏾
Thanks!
You just saved me $500 appreciate that 🙏🏼
No problem glad I could help.
Damn, u make it look so easy. But I still dont have the tools to try it 😂
Save up and get some dude it’s worth it. Also if turning bolts not your thing that’s cool to. Just make sure the shop you take your ride to is a reputable one.
I got d2 springs...an I'm starting to think I should've went with coilover ...most alignment spot was telling me I'm too low to even align it wasn't a good experience
I would definitely go with coilovers. Better all around setup. Coilovers come with the strut that is actually made for the lower ride height. Springs just make it so your car is low but you get no real benefits from it other that your car looks lower. Coilovers you get the appearance and better handling.
Sorry buddy but i Done my shocks and springs then to bc coilovers and never undone so much especially the brakes
Yea I’m always looking and willing to learn better and faster ways to do installs. Would you have a video of how you did your lowering springs on your Dodge Charger?
@Mushari Alqahtani not sure but if you go to the website and put in your vehicle info, the website should show you all the applications for your vehicle that they have.
Do you necessarily have to take the caliper pretty much apart just to get to the srut lol it’s literally the 3 bolts on the top and two bolt down low to have it off from what I just experienced
It's not as safe in my opinion to do it that way, you have to secure more stuff when maneuvering the spring.
On point broski.... salute. Princess Anne MD
Thanks.
Hey bro id like to do this. I just got this car and was wondering if you could make a video showing the jacking points and where to place jack stands? The manual doesn’t say much
Unfortunately, my buddy doesn't have that car anymore. If I come across another 300 I will be sure to make that video for you.
How many hours it take you time to be done pls
About 7 hours.
What size wheels you have with lowering springs?
The oem size 20x9’s or 20x9.5’s depends on a what wheel package you have.
Okay gotcha. I just got some 22s and I got the springs but I’m afraid to put the springs on because I feel like it’s gona be to low on the 22s
Anyone know if a pair of eiback lowering springs for a Chrysler 300 fit on a charger
Not sure about that one.
It does
How does she feel. Is it comfortable or do u feel bumps
My buddy sold that car.
Good video though
Appreciate it!
@Mushari Alqahtani the link for the Godspeed lowering springs?
@Mushari Alqahtani Oh, I have it in my Amazon store (direct link to my Amazon store is in my video descriptions, And/Or "About" page & also the Amazon icon is on the banner at the top of my page). The Godspeed lowering springs is listed under the "Car Add-Ons" category. Hope this helps.
What drop is it? 1 1/2 , 2?
Will be a hundred percent transparent I didn’t measure before hand but this was on a v6 and afterwards it looked as low as a scat if that can helps. It was more than a 1 inch drop though.
@@OctaneRed392 thank you
🔥🔥🔥🔥🔥