Walcom missed this but the outlaw has the same muzzle as the nexus pro and other similar dart zone blaster so the outlaw is able to take the same barrels those blasters can. This includes scar barrels that work on nexus muzzles
When I first got the Outlaw I was surprised at how significant the prime was. It was pretty difficult at first, but now after using it a bit and figuring out the right angle to prime it, it’s honestly very manageable. I actually have a harder time priming a stock Nerf hammer action with my non-dominant hand than the Outlaw
@@WalcomS7 Wasnt on sale but after watching for months I grabbed the Longhshot. Now to A) Find a Nerf War nearby and B) Maybe or maybe not mod the Longshot. To me the issue with the Longshot isnt the rails or wobbly front prime, its the "ping" after it fires. I have some hard hearing and used to be pitch perfect when I was younger, but that ping is just SOOOOOO loud I dont think I could handle the ping of a even stronger spring.
I feel that the "happy medium" is somewhere between this and their Adventure Force revolver. It seems the hammer design was intended for someone with freakishly large hands. They should have went with something like the 4Victory or Sweet Revenge.
My hands are not freakishly large. I think my hands are relatively small compared to most adult men. I have no problem with handling my Outlaw. But I do agree that the hammer primer could use a much better design. I like that it is relatively hard to pull the hammer down. That just tells me that it's building up quite a bit of potential energy. The Kinetic energy yields me an average FPS of 129. That's a little lower than what I would like. Nexus Pro has spoiled me with their 150+ FPS off the shelf. So now, that's the standard I expect from Adventure Force and Dart Zone..
If you have the X-Shot Longshot, throw that (not so) SCAR barrel attachment on your Outlaw. For whatever reason (I'm assuming mostly barrel length), the shot groups get significantly tighter.
@@rcautoball after a few tests it seems like the scar barrel is make accuracy worse on the outlaw... the internal barrel and scar barrel seperation combined with the relative low speed and the tightness of the scar seem to be causing the darts to either fly out in random directions or with low power (I tested the scar on my dictator and that one is far more accurate though)
Mammas don't let your babies grow up to be cowboys. Make sure you pre-register for the Anime Action RPG Wuthering Waves! wutheringwaves.kurogame.com/en/?WalcomS7
Regarding the hammer travelling into the hand : As opposed to a real gun using gun powder, foam blasters depend on the power of piston, hence the range of a real hammer action gun is not enough to prime a spring powered blaster for up to 125 fps. since there is a need for a longer distance of priming, the hammer cannot be too far forward to make it still workable for one handed. so i understand dart zone has to make the hammer prime all the way down into the hand. its the best design choice workaround / compromise for a stronger prime. if the prime distance is shorter, the spring will have to be adjusted stronger and makes the prime too strong for mass market. or reduce the fps but this is meant to be under Max series.
The Hammer does not hit your hand if you're priming it one - handed. I have size medium hands and a below - average grip strength and I can hammer - prime this thing while keeping the barrel level.
You may have baby hands, but you got STRONG baby hands, I recently picked one up and I was surprised by how powerful the spring was inside. If I didn't have comically large hands with a good grip strength I would be struggling a bit to pull that hammer down one handed - still instantly fell in love with it
They did mention in their own livestream that they will be offering a second spring option (not yet for sale when they posted) for a lighter prime and less velocity. Kind of insane the performance it gets already, especially for the price.
Walcom this was a pretty spot on review and gave us some good perspectives too. I noticed many of the same things about this blaster. Awesome vid Ty! I got two as well. 😂
Dart zone sells a 2 pack of lower power springs, and OutOfDarts also has an option. I have the OOD spring and it makes it so much easier to one hand prime, I feel it’s what it should have shipped with. It’s a sidearm, it doesn’t need to hit 140…
I had to take my Outlaw apart the other night, I think the plunger spring rotated in such a way that it was blocking the plunger itself from priming. It wasn't difficult to rotate it a bit more to correct the issue, but it did take a moment to figure out what was even wrong, since all the parts were in their correct places.
If i am not wrong you can buy an weaker spring from dartzone themselfs so you can actually fan the hammer (or at least that what they said on their channel) and not break your thumb while dual wielding
I asked dartzone how to get straps and they told me you can attach it to your belt... not sure how that would work (or if it would help you with your tilting issue)
Curious as Im newer to Hobby Nerf. Read there is a lighter spring option. Could it be possible with a lighter spring and a modified hammer, one a bit larger and flatter, to "fan the hammer" with the Outlaw. Forget dual wielding, single hand fan the hammer and have 2 or 3 spare cylinders in your loadout. Again newer so not sure what limitations would make this impossible.
The point of aim is low on mine. If I line the bottom of the pip on the front sight up with the top of the blade in the back sight it shoots where I want it to. I haven't tested it beyond about 20 feet, but in that range I can hit whatever I want consistently.
Bought one of these and it's awesome. A few awkward things about the ergonomics and I'm sad you can fan the hammer, but it's a great not only novelty but useful side arm that legitimately has advantages over others in that it's one hand primeable.
I feel like some traditional revolver grip might have made this a bit better ergonomically. Maybe a webleystyle grip since it probably is one of the most advanced
I hardly comment but i had to here. I listened to this review by Walcom and was surprised by how critical it was. I usually agree with him, but i decided to get this anyways. It is by far one of the best blasters i’ve gotten from Dart Zone Max besides the Stryker. It makes the Deuce Pro useless (one of the most regrettable blasters i’ve ever bought). It’s comfortable and the hammer is so much easier to prime than the Deuce Pro, and NONE of the feeding problems that plague the DP. It’s friggin great and honestly made me rethink investing in a Nightengale. Yes, it’s only 6 available shots, which the Nightengale is better with, but it’s only $30 compared to the $100 that the Nightengale would be after buying a battery/charger. The Outlaw is an OUTSTANDING side arm blaster. Hits hard and accurate. Don’t second think this blaster- it’s one of the best sidearms available especially at this price point.
Dark Corps Armory update: just flipped the Deuce PRO to left side and fits WRKR Nightingale perfectly, but also MAXPRO Outlaw on right side pretty well too #savesomecashongearyoualreadymayhavearound
I own an Outlaw. I'm very pleased with it. Yes, I do agree that the hammer primer could have been a better design. I measured my gun on a chronograph, and it averaged 129 FPS. I would not recommend using two of them at once much like how you attempted to in this video. But, if you hold the gun like a cop and look at your target and avoid looking through the sites, the guns accuracy can be really good. I find it to be a very accurate weapon.
Naw it's because the hammer basically moves into the grip so it has to return automatically or you couldn't properly hold the thing. Great blaster but questionable design decisions.
Kinda wish they had Revolver grips. They'd be easier to work with them. Though im guessing they made them this shape due to mechanical requirements rather than it being the best grip for ease of use.
I'm not going to argue that the prime is hella wonky, but I've got big hands so it really doesn't bother me. My first nerf gun was a hammer prime nerf blaster, and this brings me back! Also, I love that it fits other DZ pro attachments.
A few of my friends tried the prime on my Outlaws and they had a similar reaction to Walcom. I honestly didn't notice, but then I do construction work so my hands are kinda used to the wear and tear of using tools. I've also got pretty big hands to the hammer is in a comfortable place for me. I would say though that if you're someone with smaller hands or hands that aren't used to manual labor (no judgment or shame, just observation) a hammer prime might just not be the way to go.
Theres a bit of technique actually to priming a hammer action specially with small hands I get how it can feel Bad but it is cuz it's not that straight forward
You just have small hands Walcom, I'm easily able to prime an Outlaw using only both hands after vice gripping it to a table (sometimes I have to use duck tape though)
@@WalcomS7 I was mainly worried about having to put it on its side with a bunch of supports. Knowing there is a way for it to stand up is enough for me, worst case, I can print it nice and slow.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Walcom missed this but the outlaw has the same muzzle as the nexus pro and other similar dart zone blaster so the outlaw is able to take the same barrels those blasters can. This includes scar barrels that work on nexus muzzles
supressed revolver🤤
Does that mean it can shoot mega darts like the nexus pro can?
@@popcat1787oh that’d be sick
@@Ibrahim-522I love those types of revolver
I’ve tried the worker scar barrels and the darts aren’t able to get out of the barrel 😬
When I first got the Outlaw I was surprised at how significant the prime was. It was pretty difficult at first, but now after using it a bit and figuring out the right angle to prime it, it’s honestly very manageable. I actually have a harder time priming a stock Nerf hammer action with my non-dominant hand than the Outlaw
those extremely accurate shots by feel were jaw dropping. nice video! lovely blaster by dart zone once again
This thing is by far the best hammer prime blaster I’ve ever used. It’s so stupidly comfortable.
Agreed. I have a large finger span too, so the hammer prime is comfy too.
Trying to get into foam flinging is hard(bc broke) but it always makes me happy seeing one of your vid walcom. Never change
Just bide your time for a sale on the LongXshot and stuff. People were finding the Dart Zone Dictator at target for 18 bucks recently...
@@WalcomS7 will do papa walc🫡
@@WalcomS7 Wasnt on sale but after watching for months I grabbed the Longhshot. Now to A) Find a Nerf War nearby and B) Maybe or maybe not mod the Longshot. To me the issue with the Longshot isnt the rails or wobbly front prime, its the "ping" after it fires. I have some hard hearing and used to be pitch perfect when I was younger, but that ping is just SOOOOOO loud I dont think I could handle the ping of a even stronger spring.
8:31 I had to stand up after you nailed exactly the same spot 3 times in a row. I couldn't believe that
Honestly best blasters they've released in recent years, brought it immediately from target
I feel that the "happy medium" is somewhere between this and their Adventure Force revolver. It seems the hammer design was intended for someone with freakishly large hands. They should have went with something like the 4Victory or Sweet Revenge.
Explains why it's comfortable for me.
My time has come. Finally a blaster made for the tall big handed freaks.
But… doesn’t he have freakishly large hands? Or do **I** have freakishly small hands?
Walcom has always stated that he has tiny hands.
My hands are not freakishly large. I think my hands are relatively small compared to most adult men. I have no problem with handling my Outlaw. But I do agree that the hammer primer could use a much better design. I like that it is relatively hard to pull the hammer down. That just tells me that it's building up quite a bit of potential energy. The Kinetic energy yields me an average FPS of 129. That's a little lower than what I would like. Nexus Pro has spoiled me with their 150+ FPS off the shelf. So now, that's the standard I expect from Adventure Force and Dart Zone..
I like how he used Josey Wales holding Mavericks for the target paper.
Been loving the outlaw it has been the most accurate of the half length blasters in my opinion
If you have the X-Shot Longshot, throw that (not so) SCAR barrel attachment on your Outlaw. For whatever reason (I'm assuming mostly barrel length), the shot groups get significantly tighter.
@@rcautoballor the mk4 (mine fits like a charm on all the dart zone blasters)
@@legomeaker101potato Nice! Did you notice it shooting more accurately with it as well?
@@rcautoball haven't tested it in depth but I felt the shots were slightly better (haven't had time because of work)
@@rcautoball after a few tests it seems like the scar barrel is make accuracy worse on the outlaw...
the internal barrel and scar barrel seperation combined with the relative low speed and the tightness of the scar seem to be causing the darts to either fly out in random directions or with low power (I tested the scar on my dictator and that one is far more accurate though)
Been eagerly awaiting this video to hear walcom say some nice things about a hammer prime blaster was not disappointed lol
Good stuff as always!
Mammas don't let your babies grow up to be cowboys.
Make sure you pre-register for the Anime Action RPG Wuthering Waves!
wutheringwaves.kurogame.com/en/?WalcomS7
I freakin' love this blaster SSSOOOOO much.
Pin your comment?
Regarding the hammer travelling into the hand : As opposed to a real gun using gun powder, foam blasters depend on the power of piston, hence the range of a real hammer action gun is not enough to prime a spring powered blaster for up to 125 fps. since there is a need for a longer distance of priming, the hammer cannot be too far forward to make it still workable for one handed.
so i understand dart zone has to make the hammer prime all the way down into the hand. its the best design choice workaround / compromise for a stronger prime.
if the prime distance is shorter, the spring will have to be adjusted stronger and makes the prime too strong for mass market. or reduce the fps but this is meant to be under Max series.
The Hammer does not hit your hand if you're priming it one - handed. I have size medium hands and a below - average grip strength and I can hammer - prime this thing while keeping the barrel level.
Cowboy walcom has been born 🤠
Ye he has! He a southern feller no now!
Damn that cylinder ejection is so cool.
Mine broke first day, but i think i had a lemon and i was low-key torture testing that mf. I will get another one tho, i loved the hell out of it
"Walcom, you turned off your iron sights, what's wrong?!"
Legend has it, this is Walcoms training regiment for Thumb Wresting.
“Pants as high as a Pixar mom.” 😂
You may have baby hands, but you got STRONG baby hands, I recently picked one up and I was surprised by how powerful the spring was inside. If I didn't have comically large hands with a good grip strength I would be struggling a bit to pull that hammer down one handed - still instantly fell in love with it
It's all those rhythm games I play.
"I'm just going to try and feel it." Proceeds to unlock Jedi mode.
"Well I guess he should have armed himself before he decorated his bar with my friend."
Dart zone sells a low-powered spring for the Outlaw. Have you tried it? Also great video as always!
Well let’s agree he was late on this video but I have been waiting for this video
They did mention in their own livestream that they will be offering a second spring option (not yet for sale when they posted) for a lighter prime and less velocity. Kind of insane the performance it gets already, especially for the price.
Bought my Outlaw a few weeks ago and I love it, I can't wait until we get hammer mods to change the shape and really get to Fan it.
Walcom this was a pretty spot on review and gave us some good perspectives too. I noticed many of the same things about this blaster. Awesome vid Ty! I got two as well. 😂
Picked one of those up a few days ago. Grips isn't bad, and it can be used with the X-shot Insanity connectors.
Does patrolling the Mojave almost make you wish for a nuclear winter?
Those are INCREDIBLY tight groupings later on when u went on feeling alone!
Definitely getting at least one of these. Seems like it might be fun to plink around with.
This + the x-shot lock blaster = coolest futuristic cowboy ever.
This blaster was my first introduction into higher power nerf blasters. It looks so cool and really fun to shoot.
Dart zone sells a 2 pack of lower power springs, and OutOfDarts also has an option.
I have the OOD spring and it makes it so much easier to one hand prime, I feel it’s what it should have shipped with. It’s a sidearm, it doesn’t need to hit 140…
I had to take my Outlaw apart the other night, I think the plunger spring rotated in such a way that it was blocking the plunger itself from priming. It wasn't difficult to rotate it a bit more to correct the issue, but it did take a moment to figure out what was even wrong, since all the parts were in their correct places.
The good, the bad, and the foam flinging
The Hammershot is the best revolver blaster of all time. 🤪
He finally took a look at the outlaw! It has very quickly become my favorite sidearm for nerfing and it's super fun for me to use
I recently got the outlaw, and it's crazy
OMG the Cromatie High School Reference was so good!
love your videos and streams
fun fact: i recently found out that the outlaw can actually take the barrel atachment you find on the 2.1
Amazing welcom keep up the good work man’s
If i am not wrong you can buy an weaker spring from dartzone themselfs so you can actually fan the hammer (or at least that what they said on their channel) and not break your thumb while dual wielding
Hey did the intro music just disappeared?
I asked dartzone how to get straps and they told me you can attach it to your belt...
not sure how that would work (or if it would help you with your tilting issue)
... I... How?
@@WalcomS7 I don't know... I asked and they said "use the two holes in the bottom, the top is only if you want drop leg holster"...
Yessir my day has been brightened!
Curious as Im newer to Hobby Nerf. Read there is a lighter spring option. Could it be possible with a lighter spring and a modified hammer, one a bit larger and flatter, to "fan the hammer" with the Outlaw. Forget dual wielding, single hand fan the hammer and have 2 or 3 spare cylinders in your loadout. Again newer so not sure what limitations would make this impossible.
This blaster fell right into my heart.
the thumbnail had me rolling on the floor lmao
remember, switching to your second pistol is faster than reloading
The point of aim is low on mine. If I line the bottom of the pip on the front sight up with the top of the blade in the back sight it shoots where I want it to. I haven't tested it beyond about 20 feet, but in that range I can hit whatever I want consistently.
Bought one of these and it's awesome. A few awkward things about the ergonomics and I'm sad you can fan the hammer, but it's a great not only novelty but useful side arm that legitimately has advantages over others in that it's one hand primeable.
If you run out of darts and you need to reload you can use the cylinders as a projectile
I'm definitely one of those people who are strong enough to prime it comfortably
Good video as always!
I love this blaster! It’s stupidly powerful, more accurate than my primary, and looks beautiful.
...I don't know if you've done it before, but this is the first time I noticed the 'Freddy' fanfare from Cromartie High School
I feel like some traditional revolver grip might have made this a bit better ergonomically. Maybe a webleystyle grip since it probably is one of the most advanced
I love your channel and I love when you post a new video. Good job ❤❤❤❤😊😊
Thank you so much!!
I hardly comment but i had to here. I listened to this review by Walcom and was surprised by how critical it was. I usually agree with him, but i decided to get this anyways. It is by far one of the best blasters i’ve gotten from Dart Zone Max besides the Stryker. It makes the Deuce Pro useless (one of the most regrettable blasters i’ve ever bought). It’s comfortable and the hammer is so much easier to prime than the Deuce Pro, and NONE of the feeding problems that plague the DP. It’s friggin great and honestly made me rethink investing in a Nightengale. Yes, it’s only 6 available shots, which the Nightengale is better with, but it’s only $30 compared to the $100 that the Nightengale would be after buying a battery/charger. The Outlaw is an OUTSTANDING side arm blaster. Hits hard and accurate. Don’t second think this blaster- it’s one of the best sidearms available especially at this price point.
Love the Clint Eastwood picture !!! 🔫🤠👍
Dark Corps Armory update: just flipped the Deuce PRO to left side and fits WRKR Nightingale perfectly, but also MAXPRO Outlaw on right side pretty well too #savesomecashongearyoualreadymayhavearound
I own an Outlaw. I'm very pleased with it. Yes, I do agree that the hammer primer could have been a better design. I measured my gun on a chronograph, and it averaged 129 FPS. I would not recommend using two of them at once much like how you attempted to in this video. But, if you hold the gun like a cop and look at your target and avoid looking through the sites, the guns accuracy can be really good. I find it to be a very accurate weapon.
hey wizcom how is it when i aim at something i can hit it
thank you
I feel like the hammer returns on the prime for safety so you don't get flicked in the face if you put it to close or something like that.
Naw it's because the hammer basically moves into the grip so it has to return automatically or you couldn't properly hold the thing. Great blaster but questionable design decisions.
Still waiting for this thing to be available outside of Target
Kinda wish they had Revolver grips. They'd be easier to work with them. Though im guessing they made them this shape due to mechanical requirements rather than it being the best grip for ease of use.
that target practice tablet thing, is an app or what is it?
I'm not going to argue that the prime is hella wonky, but I've got big hands so it really doesn't bother me. My first nerf gun was a hammer prime nerf blaster, and this brings me back! Also, I love that it fits other DZ pro attachments.
Dude I love you bro, you are perfect for this. Dart zone ought need to be paying you
A few of my friends tried the prime on my Outlaws and they had a similar reaction to Walcom. I honestly didn't notice, but then I do construction work so my hands are kinda used to the wear and tear of using tools. I've also got pretty big hands to the hammer is in a comfortable place for me. I would say though that if you're someone with smaller hands or hands that aren't used to manual labor (no judgment or shame, just observation) a hammer prime might just not be the way to go.
Howdy cowboys🤠
I wish somebody made a shell for it that makes it look more cowboy.
Hey Walcom ! Got a crate” coming for you
It's on sale at target rn along with the xshot longshot. Full loadout for 61 bucks.
You must be wondering how did i shot 7 darts from a 6 dart recolver, well, the true question is, im feeling lucky, are you?
Outlaw for more range plus Hammershot for faster RoF / specialty cylinders?
I found out that you can stick a dart in the barrel and it will fire the dart
The one thing dart zone routinely falls short at are pistols.
How do you deprime it?
since i was i child i wanted a removable cylinder magazine... on my nerfs...
too bad you cant do the fanning move with it....
I'd mod the grip to be swept back like kronos
Hammer prime pistols are my favourite plinker style blaster. And I am extremely annoying that this blaster doesn’t ship to the UK… furious even
So its like a colt single action army
Ok, now someone make this lever action
Theres a bit of technique actually to priming a hammer action specially with small hands
I get how it can feel Bad but it is cuz it's not that straight forward
I could see this being a good pirate gun if you have huge hands and a melee weapon.
Got one of these and its amazing
yo only out for 1 minute and already 5 comments lmao. GG Walcom love ur content :)
You just have small hands Walcom, I'm easily able to prime an Outlaw using only both hands after vice gripping it to a table (sometimes I have to use duck tape though)
How difficult was the holster to print? I haven't looked at it too close, but it seems like an awkward shape to print
Not that hard at all... But I have a Bambu Labs X1 Carbon.
@@WalcomS7 I was mainly worried about having to put it on its side with a bunch of supports. Knowing there is a way for it to stand up is enough for me, worst case, I can print it nice and slow.
Man it would be nice to actually own an Outlaw right now
Cool
Awesome 👏
Why not 'Dirty Harry ' the holsters (under your arms)
Requires materials the fat kid lacks =P
Can it shotgun foam balls?
I still love my hammershot tho