I'm surprised that there are only two screws holding the filter in place. It looks like the top of the filter is not tight and therefore maybe not well sealed? You can see it move at 8:37 when you push on it. All that aside though, did you notice any improvement in sound from the intake or any performance gains?
The K&N filter fitted well in the housing and the outside is completely made of rubber. So that sealed well against the plastic housing. After installing the K&N no power gain or other noise noticeable. Greetings Jan
Nice video but there is no need to remove the fuel tank or disconnect any hoses or wires. With the tank propped up there is easy access to the screws holding the airbox cover down. Once the airbox cover is lifted halfway, the filter can be removed and replaced.
Hello, maybe it is indeed possible to do it the way you discribe. But i like to have some place to work. And removing the entire fuel tank is not a lot of work when you already tilted it. So i prefer to do it that way, but if you have the same result with tilting the fuel tank, that is also a good way to do it. Greetings. Jan
Hello, do you mean the crash protection? They are from the brand "Evotech Performance". They are not cheap (about 250€) but very good. www.sdmoto.fr/nl/frame-bescherming-evotech-voor-honda-cbr650r-20192020-xml-386_404-5350.html Greetings from belgium.
Hello, here you can buy them, and also afterworths, you can buy parts seperatly here. gegshop.nl/nl/evotech-performance/22665-PRN014422-Valblokset-Evotech-Performance-Honda-CBR650R-2019-2020-2021.html Not cheap, buth great quality Evotech Performance
You can remove the tank If there is still fuel in the tank. But you Will have a little bit of spill then. The best is to remove it when its almost empty.
@@JanSV i understand that you have to install it back. I'm just wondering how come the gas doesn't pour out after you disconnect the hoses when you removed the tank. Does the tank have a valve that stops the gas from coming out?
@@farxalfonso8487 Hello Alfonso, when i removed the gas tank, there was still a lot of fuel in the tank, when i took it away from the bike, there was a spill of a few ml of fuel. Then i put it on the gras, and there the fuel was leeking. So the gras died and there was a lot of fuel out of the tank. So it still leaks when you take the fuel tank away.
there is a check valve that is normally closed on the petrol line. Until the engine is powered up the valve stays closed and the fuel will not spill out of the tank.
I mean, this is a 2019 Model, the first Year CBR650R. This Model have Problem by cooling the Motor. Honda Thailand know this but not help the Customers. To now i know 6 Persons, who was crashed because the Motor spreaded out the Water to Expansion Bottle and from Overflowtube to Rear Tyre. I crashed too and after the Heat from Exhaust was melting the Expansion Bottle. So be careful if change a Airfilter and will drive long Time with High RPM and the Watertemp. If Icon on Dashboard starts to blinking, the Water will spray out. I only want warning.
Hello, that is bad news. Never heard of it. I hope i will be spared from that problem. But i wil keep looking at the temperature when driving it. Thanks for the advice.
@@rolandrieser2828 hello Roland. I will follow it up. If I see problems with my bike. I will place also a new radiator. Until today I never heard of the problem.
@@JanSV it is only the CBR650R 19' For the Year 2020, they repair this Problem. But Honda can sell you the Cap 1.1 I will looking for the Part Number and will send you.
![HONDA CB650R sound & review + the embarrassing reason why I don't like the E-Clutch! [RAW Onboard]](http://i.ytimg.com/vi/cU9XqLeB5QY/mqdefault.jpg)
![HONDA CB650R sound & review + the embarrassing reason why I don't like the E-Clutch! [RAW Onboard]](/img/tr.png)
Excelente vídeo! zx10R foi muito mais difícil, agora vou substituir o filtro da CBR 650R com 10.000km rodados. obrigado pelo tutorial ! 🇧🇷✊
Great video 😊helped me out with a few things I was after.
thanks man, very helpful
Big thanks from french rider 🤠✌️
You are welcome. We will come and visit your beautifull country this summer. And visit the south across the mediterranian. Greetings Jan
You are making amazing video very helpful thank you so muchh i m from india your. Subscriber
Thanks for subscribing. Glad i could help you. Greetings from belgium.
I'm surprised that there are only two screws holding the filter in place. It looks like the top of the filter is not tight and therefore maybe not well sealed? You can see it move at 8:37 when you push on it. All that aside though, did you notice any improvement in sound from the intake or any performance gains?
The K&N filter fitted well in the housing and the outside is completely made of rubber. So that sealed well against the plastic housing.
After installing the K&N no power gain or other noise noticeable. Greetings Jan
Thank you for the video...
Nice video but there is no need to remove the fuel tank or disconnect any hoses or wires. With the tank propped up there is easy access to the screws holding the airbox cover down. Once the airbox cover is lifted halfway, the filter can be removed and replaced.
Hello, maybe it is indeed possible to do it the way you discribe. But i like to have some place to work. And removing the entire fuel tank is not a lot of work when you already tilted it. So i prefer to do it that way, but if you have the same result with tilting the fuel tank, that is also a good way to do it. Greetings. Jan
Servus Jan,
nice video. Is there a noticeable difference in sound compared to the original air filter?
Greetings from the Eifel
Hello. No there is no difference in sound. Greetings from antwerp belgium.
What kind of slide cage are you using I like that set up !
Hello, do you mean the crash protection? They are from the brand "Evotech Performance".
They are not cheap (about 250€) but very good.
www.sdmoto.fr/nl/frame-bescherming-evotech-voor-honda-cbr650r-20192020-xml-386_404-5350.html
Greetings from belgium.
Good job man continue on doing nice videos
Is there anyway you can send me a link for the engine sliders on this bike...??
Hello, here you can buy them, and also afterworths, you can buy parts seperatly here.
gegshop.nl/nl/evotech-performance/22665-PRN014422-Valblokset-Evotech-Performance-Honda-CBR650R-2019-2020-2021.html
Not cheap, buth great quality
Evotech Performance
Thank you :)
Did the intake sound change ?
No it sounds the same. Also the same hp. So it feels. I feel no difference.
Notice any difference in power or sound?
No difference
Is it ok? Removal a tank. If tank full of fuel?
You can remove the tank If there is still fuel in the tank. But you Will have a little bit of spill then. The best is to remove it when its almost empty.
How does the gas doesn't pour out when yun remove the hoses?
You have to install everything back before you start the engine. The K&N does not make a big difference. Quit the same like the original air filter.
@@JanSV i understand that you have to install it back. I'm just wondering how come the gas doesn't pour out after you disconnect the hoses when you removed the tank. Does the tank have a valve that stops the gas from coming out?
@@farxalfonso8487 Hello Alfonso, when i removed the gas tank, there was still a lot of fuel in the tank, when i took it away from the bike, there was a spill of a few ml of fuel. Then i put it on the gras, and there the fuel was leeking. So the gras died and there was a lot of fuel out of the tank. So it still leaks when you take the fuel tank away.
there is a check valve that is normally closed on the petrol line. Until the engine is powered up the valve stays closed and the fuel will not spill out of the tank.
I mean, this is a 2019 Model, the first Year CBR650R.
This Model have Problem by cooling the Motor. Honda Thailand know this but not help the Customers.
To now i know 6 Persons, who was crashed because the Motor spreaded out the Water to Expansion Bottle and from Overflowtube to Rear Tyre.
I crashed too and after the Heat from Exhaust was melting the Expansion Bottle.
So be careful if change a Airfilter and will drive long Time with High RPM and the Watertemp. If Icon on Dashboard starts to blinking, the Water will spray out.
I only want warning.
Hello, that is bad news. Never heard of it. I hope i will be spared from that problem. But i wil keep looking at the temperature when driving it. Thanks for the advice.
@@JanSV i was instal a bigger Radiator and now is ok.
And i have now a Radiator Cap 1.1 bar.
Stock i mean is 0.8 bar
@@rolandrieser2828 hello Roland. I will follow it up. If I see problems with my bike. I will place also a new radiator. Until today I never heard of the problem.
@@JanSV it is only the CBR650R 19'
For the Year 2020, they repair this Problem.
But Honda can sell you the Cap 1.1
I will looking for the Part Number and will send you.
Ok, PartNumber Honda for a Cap 1.1
19045-RAA-003
What a pain
And to replace the sprak plugs you have to go even further.
Thanks men👍🏻👍🏻👍🏻👍🏻