You did an awesome job presenting! You covered safety steps of depressurization and battery disconnect, showed not only major steps but minute detail where it mattered. And, you didn't waste any time like so many other presenters. Thank you again, Mark Alan
You was clear on everything step by step and also you showed exactly where it was located that be the struggle of a lot of mechanic videos that I watch. I be lost if where the parts are. Thank you 🙏🏽!
I just bought my second jeep, 2002 jeep liberty 3.7 Litre. Out of all the other videos I tried to find to change an injector this was the most helpful, you also seem like you would be just like me when working on a car double checking everything and putting things down and forgetting where they were, thank you so much for this helpful video!
thank you so much for this! I have cried, screamed and panicked about changing my own injector after a persistent cylinder 2 misfire and this helped me so much. Attempting to do mine this weekend!
wayneacguy - You are welcome and I thank you very much for the nice comment! If you haven't already, give us a follow and Subscribe as there will be more! Thanks again!
thanks man i think my jeep keep getting problems with your jeep the last time i use you vido i change transmission fulid succesfully and now i am having problems with my fuel injecter i am going to use your vido again thanks
VERY helpful video. We just replaced the plugs, injectors and coils on a 2005 Liberty with the 3.7. Not quite the exact same underhood layout but close enough for the major steps. Some of the wiring plugs didn't want to come off, but we managed to get them. Thanks for the video!
Great information, especially with having a small magnet handy............. One thing that could have been covered is how to remove the wiring connector from the injector. It requires 2 steps, first to unlock the connector, then to press and remove. Update: Still love this video since I had the replace a 2nd injector. Thanks again!
This is so far the best informative video that I've seen for my Jeep that actually shows what needs to be done. I'm going to subscribe because I want to replace my fuel injectors too. Have you done a video that shows how to replace the fuel pump?
Great video, But I was really looking for when you pulled the injector out of the manifold. I am doing an 08 and the injector is 'stuck' in the manifold. I am guessing that I just have to pull a little harder. Thanks.
I guess I didn't show that did I! Sorry about that! Yeah I'm thinking probably just needs some extra persuasion. Lol Thanks for the comments. Give us a follow and Subscribe as there will be more!
Do you have the link for the pcv valve replacement? I snapped mine in 3 parts. I'm working on mine with no battery either and it's been sitting for a couple months. Is there another way I can take out the fuel?
As of now i have the wrong injectors i tried it still but throwing a misfire code so im gonna hve to re put the factory ones in til my original comes in the mail
This was best informative video of the 3 I looked at appreciate the way you deliver the information. If I need help in the future you'll be the video I go to in Tucson by end of the year is my plan go AZ!!!
You're welcome! I think it went from16-17 to 18-19 so a couple mpg. Thanks for the comment. Please Susbcribe & Hit that Notification Bell as there will be more!
Hi Jared, Are you talking about the electrical connection to one of the injectors? Do you have any of them off or are you unsure how the connector releases? It should have kind of a button that you squeeze. While doing that just gently wiggle the connector while pulling off.
Mr. A, It just seemed down on power and the gas mileage was down so with all the miles on it, I thought I put new injectors & plugs in it. It did definitely help. There was a noticeable difference. Thanks for the question. Please Subscribe & Hit that Notification Bell as there will be more!
Eric Raeder, I'm not sure what smell proses are but yes after so many miles they should be replaced! Thanks for the comment. Give us a follow and Subscribe as there will be more!
I really like your video. Especially since it looks like I will have to replace an injector on my 3.7. What was the symptoms? I would like to point out one thing about "O" rings though, for rubber "O" rings use silicon to lube them, for silicon "O" rings, use vaseline. This will keep them from swelling and deteriorating.
Hi Rondo, I'm not sure what the codes are for either but I wouldn't think it would be the same code. Did you change the spark plugs? Give us a follow and Subscribe as there will be a lot more!
Hi Sean, Basically because they had almost 180,000 miles and it was just kind of sluggish. I did the plugs at the same time and boy it runs better. Give us a follow and Subscribe as I have more videos coming up! Check out the Spark Plug video, here is the Link: ruclips.net/video/xEnEavDSbDE/видео.html
My 09 feels sluggish too and I was wondering what the cause could be. I have about 161,000. Never replaced any injectors or fuel pump but am thinking of doing that.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
You did an awesome job presenting! You covered safety steps of depressurization and battery disconnect, showed not only major steps but minute detail where it mattered. And, you didn't waste any time like so many other presenters. Thank you again, Mark Alan
Thanks so much Mark! Your nice words mean a lot to me! God Bless!
Thank you for this video. I followed your direction and I was able to replace all 6 injectors. Great save
Great! Glad it helped!
You was clear on everything step by step and also you showed exactly where it was located that be the struggle of a lot of mechanic videos that I watch. I be lost if where the parts are. Thank you 🙏🏽!
You're welcome and thanks for the comment!
I just bought my second jeep, 2002 jeep liberty 3.7 Litre. Out of all the other videos I tried to find to change an injector this was the most helpful, you also seem like you would be just like me when working on a car double checking everything and putting things down and forgetting where they were, thank you so much for this helpful video!
I'm glad it helped! Thanks so much for the comment!
thank you so much for this! I have cried, screamed and panicked about changing my own injector after a persistent cylinder 2 misfire and this helped me so much. Attempting to do mine this weekend!
Good luck! I hope you were successful!
i have to say that is the best video i have seen on changing injectors thank you
wayneacguy - You are welcome and I thank you very much for the nice comment! If you haven't already, give us a follow and Subscribe as there will be more! Thanks again!
Thank you! You saved me a bunch of money by teaching me how to do this myself. Just did it in my 08 grand Cherokee today.
Awesome! Glad it helped Roy! Thanks for the comment and please give us a follow and Subscribe as there will be more!
thanks man i think my jeep keep getting problems with your jeep the last time i use you vido i change transmission fulid succesfully and now i am having problems with my fuel injecter i am going to use your vido again thanks
Cool! I hope it helps!
VERY helpful video. We just replaced the plugs, injectors and coils on a 2005 Liberty with the 3.7. Not quite the exact same underhood layout but close enough for the major steps. Some of the wiring plugs didn't want to come off, but we managed to get them. Thanks for the video!
Cool you’re welcome! Glad it helped! Thanks for the comment!
Thank you doing my 09 Laredo this weekend just ordered the injector ignition coils spark plugs and wires doing a lilttle tune up
Cool have fun and thanks for the comment!
Great video. Had an injector go out, and this made it so much easier. Thanks
Glad it helped Chopper50! Thanks for the comment!
Thank You So Much!
You're welcome!
Great information, especially with having a small magnet handy............. One thing that could have been covered is how to remove the wiring connector from the injector. It requires 2 steps, first to unlock the connector, then to press and remove.
Update: Still love this video since I had the replace a 2nd injector. Thanks again!
Thanks Peter! Yeah I'm learning and trying to improve my videos. Thanks for comments!
Thank You so much. This is exactly what I have to do and your step by step is invaluable.
You're very welcome Paul! Glad it will help! Thanks for Subscribing and for the comments!
This is so far the best informative video that I've seen for my Jeep that actually shows what needs to be done. I'm going to subscribe because I want to replace my fuel injectors too. Have you done a video that shows how to replace the fuel pump?
Thank you Geanette! I'm glad you liked it! I have not done the fuel pump yet but I'm sure I will sometime. Thanks again for the nice comments!
Nice info. Got the 3.7 in a Jeep Liberty KJ. Have to do 100,000 mile tune up. Probably similar eh?
Now I'm not a professional but I would guess it would be part of it! Thanks for the comment! I hope it helps!
Did you have to relief pressure in the fuel rail valve on the passenger side before you lifted the rail out of place?
Great video Btw!
Yes you do.
Great video, But I was really looking for when you pulled the injector out of the manifold. I am doing an 08 and the injector is 'stuck' in the manifold. I am guessing that I just have to pull a little harder. Thanks.
I guess I didn't show that did I! Sorry about that! Yeah I'm thinking probably just needs some extra persuasion. Lol Thanks for the comments. Give us a follow and Subscribe as there will be more!
@@OurSimpleAdventures All good man! Yes, just a bit more pull was all it took.
@@megadethgod2010 Good deal!
Do you have the link for the pcv valve replacement? I snapped mine in 3 parts.
I'm working on mine with no battery either and it's been sitting for a couple months. Is there another way I can take out the fuel?
You’re local auto parts store should have the pcv. Take the fuel out of the tank??
@@OurSimpleAdventures to relieve the pressure
@@ChaddyMack If it has been sitting for a couple months there probably isn't much pressure.
@@OurSimpleAdventures ok.... damn u smart. Thanks
@@ChaddyMack Lol be careful though!
Perfect video, Thank you!!
You're welcome Jason!
I know this video is from 2018. I too have a WK but a 2007. Anywho, do you remember how many fuel injectors it needed?
If you have the V6 it has 6. Thanks for the question!
@@OurSimpleAdventures I have the 3.7L V6! Thank you sir!
@@ajaypro2881 Your welcome!
Thanks , i will change mines out this weekend
You can do it! Let us know how it goes and give me a follow if you haven't already!
As of now i have the wrong injectors i tried it still but throwing a misfire code so im gonna hve to re put the factory ones in til my original comes in the mail
@@028tyrone How did you get the wrong ones?
I ordered them online , wasnt sure how my fuel injectors were made until i tooked them out but its otw its not hard to do its easy than i thought
@@028tyrone If you haven't already, give us a follow and Subscribe as there will be more!
what brand did you buy injectors?
Bosch 62389 from RockAuto.com
Well done, helped me out. Thanks.
Cool glad to hear. Thanks for the nice comment. Please Subscribe & Hit that Notification Bell as there will be more!
This was best informative video of the 3 I looked at appreciate the way you deliver the information. If I need help in the future you'll be the video I go to in Tucson by end of the year is my plan go AZ!!!
Great to hear thesupaone08! Thanks for the comment! Give us a follow and Subscribe as there will be more!
what was the MPG before and after? thank you for the vid, good stuff
You're welcome! I think it went from16-17 to 18-19 so a couple mpg. Thanks for the comment. Please Susbcribe & Hit that Notification Bell as there will be more!
I'm having trouble getting the harness off the fuel injector without messing it up any tips?
Hi Jared, Are you talking about the electrical connection to one of the injectors? Do you have any of them off or are you unsure how the connector releases? It should have kind of a button that you squeeze. While doing that just gently wiggle the connector while pulling off.
Gracoas por mostrar sus vídeos hacen buen trabajo y uno aprende. Mucho
Thank you very much Walter! I'm glad they help! Give us a follow and Subscribe as there will be more! Thanks again!
How do get the plug off
Hi Heidi What plug?
Great video!! Thank you so much. I'm going to do my 08 this weekend. Much appreciated, cheers!
Hey John! So glad it helped! We can do this stuff ourselves! Thanks for the comment! Give us a follow and Subscribe as there will be more!
What symptoms where you having for you to replace the injectors?
Mr. A, It just seemed down on power and the gas mileage was down so with all the miles on it, I thought I put new injectors & plugs in it. It did definitely help. There was a noticeable difference. Thanks for the question. Please Subscribe & Hit that Notification Bell as there will be more!
Is this about the smell proses on a 2005 liberty renegade because I think I have bad ingecters that I need to replace
Eric Raeder, I'm not sure what smell proses are but yes after so many miles they should be replaced! Thanks for the comment. Give us a follow and Subscribe as there will be more!
Our Simple Adventures Sorry that was auto correct I ment same proses
Eric Raeder Lol Darn autocorrect! Thanks Eric
Great Video very simple t follow, very helpful, thanks !
Thank you Oscar, why don't you give us a follow because there will be more!
I really like your video. Especially since it looks like I will have to replace an injector on my 3.7. What was the symptoms?
I would like to point out one thing about "O" rings though, for rubber "O" rings use silicon to lube them, for silicon "O" rings, use vaseline. This will keep them from swelling and deteriorating.
Hey Luther! Thank you very much! Thanks also so much for the tip about lube! Why don't you give us a follow cause there will be more videos.
I have a Little misfire and the code came up number 5 spark plug , is this code going to come up also for a bad fuel injector?
Hi Rondo, I'm not sure what the codes are for either but I wouldn't think it would be the same code. Did you change the spark plugs? Give us a follow and Subscribe as there will be a lot more!
@@OurSimpleAdventures good going thanks
Why did you change the injectors, were they bad?
Hi Sean, Basically because they had almost 180,000 miles and it was just kind of sluggish. I did the plugs at the same time and boy it runs better. Give us a follow and Subscribe as I have more videos coming up! Check out the Spark Plug video, here is the Link: ruclips.net/video/xEnEavDSbDE/видео.html
My 09 feels sluggish too and I was wondering what the cause could be. I have about 161,000. Never replaced any injectors or fuel pump but am thinking of doing that.
thanks for video very good
Thank you very much JO! I'm glad it helped!! Thanks again!
You didn't show how to pull the injectors wtf?
Once the fuel rail was off they just pull out. I thought it was obvious.
Top shelve video!
Thanks sask flyer! Give us a follow for more!
sask flyer than
Hablen menos
Thanks for the comment Jose! Please Subscribe & Hit that Notification Bell as there will be more!