Craftsman Husqvarna Front Tractor Tires Wobbling
HTML-код
- Опубликовано: 27 авг 2024
- amzn.to/3ac6GnB Ball Bearing wheel bushing set.
amzn.to/2U7I61t Front tire complete replacement set.
In this video, I will show you a permanent fix to worn tire hubs on these cheap tractors. I replace the old brass bushings with ball bearings.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon Account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.
amzn.to/3ac6GnB Ball Bearing wheel bushing set.
amzn.to/2U7I61t Front tire complete replacement set.
I wasn't aware of the complete wheel replacement for $60 for two! Thanks!
Got a set of bearings for the front of my zero turn that will be going in this spring.
Yes replacement parts with aftermarket is getting cheaper by the month.
quick & easy fix... very nice. bet you spend more time researching the type of bearing to get than the actual repair time
Perfect fit for my Husqvarna GT52XLSi. Big improvement. Thank you.
Nice fix by a qualified mechanic!
Yeah those wheels/axles are JACKED UP!! did they ever see any grease in their lives? LoL
I have same model. Got 649 hrs. purchased from a relative. no noticable play on wheels. Will have to jack it up to verify.
649hrs? Wow!
Excellent advice. I like your high-speed eyewear.
I just ordered a set of those bearings. Big thanks for the video!
Glad I could help!
Super helpful. Thanks for makin it look so easy!
It is amazing on how cheap companies are getting . bushing instead of bearings , plastic engine parts .Sad.
I couldn't agree more.
Sometimes even the bushings are plastic! How long do they think they're going to last? Is it possible to custom order bearings if you can mic the inner and outer diameters?
Terrific upgrade!
Great tip Bob. These bearing should last for the life of the tractor I would think. Think about your son and family during this time. I'M sure he's a high risk as I am my wife works at Vanderbilt and we are just praying she doesn't come in contact with the virus and bring it home to me that would not be good. Stay Safe Stay Healthy. God Bless!!!
I have great concern for my family. Be safe, best wishes to your family. Bob
Ordered the bearings put them on and I was good to go. Bushings were cracked in half like the video.
With the wheel off, it’d be a good time to put that little flat bearing & washer on the front steering knuckle/axle - it makes steering so much easier on these mowers - Bruce Pender,Taryl etc... have some really good videos of the flat bearing & part numbers.
Great idea
I found a similar bearing that is a roller cage bearing. Much. Better than the sleeve ones.
What's the name, number??
Eano, where did you get yours? Model/part #?
@@blueplasma5589 Oregon offers a roller caged bearing that goes full depth.
3/4”x1-3/8”
HD switch on d bay also has some.
Do the kingpin flanges with flat roller thrust bearings 20x35x3mm while you are at it and stack
the spindle shaft with four caged 19x21x25 roller bearings while you are at it.
Get easier steering out of it. 👊
HD Switch is a good company. I've bought from them a few times over the years. Good quality and awesome customer service
Good to know!
Yeah I had that problem on a bollens
Really, really helpful video! Thanks for taking the time. Do you happen to know if these bearings will work on a 09 troy built bronco?
I just found a few of your videos over the past week as I've gotten into my first, more complex repairs on my mower. You've really got a great ability to deliver the useful info and not complicate things. Many thanks for all the info!
It depends on the age of the mower if I bother changing out bushings for bearings. If the Spindle is all grooved, a bearing won't matter. I have a lady with an older Scotts by John Deere and I am not messing with bearings on hers. Bushings are cheap enough and I doubt that mower is going to last long enough to make it worth the effort.
MTD uses cheap plastic so yeah.
Good idea, thanks!
You bet!
Hello! Thank you for the tutorial! Do you have any tips for dealing with the flange on the axle behind the wheel assembly? The wobbling wheel dented it all up. Thanks!
great video! Thanks
Glad you liked it!
Do this fit most Husqvarna tractors of approximately the same size as yours? Mine is a YTH2348 but appears to have the same front wheels....
Nice upgrade Bob . How are you keeping.
All good
Think all the husqvarna riders are the same? Mine looks identical but I’m not home so I can’t find out what model I have?
Hey from SK, Canada, new member here, Taryl sent me. Question for you, I like your wheel fix are most tractors the same size OD and ID or do u have to stock many sizes?
Nice!
Thank you! Cheers!
@doublewide6Repairs LLC: any advice if your bushings wont come out? I got one side out but the other wont budge. Thanks!
Mine don't wobble but do fall off every 20 minutes or so. Going through a lot of clips.
Is there any washers on them or are ur tires backwards
My husky with 80 hours had the wheel wobbling something crazy. No bearing or insert. No grease, either side. Really sad with the quality it was assembled (none)
Will this bearing kit fit a Cub Cadet ?
I don't know for sure if you look up the cub part number and search Amazon it should show you some ball bearing styles that fit.
what brand were you using? i need to get a case of those since i also do resale
See the link under the video. Thanks
Thanks to the weak-ass e-clamp that holds the wheels on, the front wheels are still at risk of falling off even with the new ball bearing bushing set. Don't buy a Husqvarna! They are the most poorly engineered lawn mowers I've ever seen.
Junk.