Thanks for the latest news bro ! I posted to the forum regarding the Rockband / Guitar Hero instrument support. I hope it gets enough buzz to have something done haha
Huge update, love to see it. I've had trouble with my wii mote getting it setup, so maybe I'll go get a Sinden, those look nice. Hope to see lightgun support for PS2 titles someday
Hi will you be doing an update on how get yuzu working in batocera 35 I've tried everything including starting from scratch with a clean instalation of 35 but had no joy.
10:30 Gut Runner looks fun. I love a lot of Tic 80 games and pico-8...Ill have to try this system. Thanks for showing this game...I'll be playing this one for sure
Batocera 35 really is a big update, so many great features. HyperspaceMadness (MegaBezels creator) and duimon the beautiful bezels for every system makes Batocera so much better than other front ends. I stopped using BigBox once I tried Batocera. So many pluses. I feel bad for people who still use Retropie lol Maybe a comparison of Batocera vs Retropie could be a good video.
@@Joy_Formidable @Retro Man , I thought Batocera was the software you load to the hardware? Do you mean that Batocera doesn't run well on retropies? I just hacked my countercade from one up and some games are decent some are terribly slow like Supermario world for snes. But I assumed its just software on top of the hardware. or am I confusing myself?
@@jfitnesshealth Yes Batocera is the operating system that runs on the hardware. It can run on a number of single board computers including the Raspberry Pis. However to get the most out of Batocera, I highly encourage you to run it off a PC. Not only is it faster, but you will have access to many more emulators including the higher end emulators. On the Steam Deck, it can even handle Switch emulation.
Hey, great news for all the batocera fans. I was waiting for the automated detection of the gpu. Now it is here. Thanks to the developers and to you for the news. I made some videos about batocera for the german audience, maybe I will do something new soon - based on the new version. Greetings
There are many problems when I use an external disk with a black screen and the ps3 emulator does not run games even though I followed all the steps. Thank you.
Hi, do you know why I don't have "advanced system options" when I go into the settings menu but do have "advanced game options?" Like I'm on the Crash Bandicoot game in the PS1 section and don't get the option there or on any other system I've checked.
This has been a great update from Batocera 35, however, there seems to be an issue with Yabasanshiro emulator. When the emulator starts, the audio is more or less consistent but the logo screen takes a dip in frame rate. Then when I play some of the games, this issue persists, even with some tweaking on the menu. This was not a problem in the previous version of Batocera. I was wondering if there's a way to fix this issue.
Hello, firstly thanks for all your support with Batocera, amazing jog! When I try run XBOX games in Batocera 35, for all of them it is requesting to insert the disk game! Any tip for me?
Is there any way to know what is on Batocera 35 for raspberry pi? I feel like there are a few things mentioned that doesn't work on the pi 4 but works only on PC. Thanks! I found an image with Batocera 32 and curious if there's a reason for me to update. Thanks!
Steam is having issues, something about a flatpak update causing issues. From the discord it seems that they may stop officially supporting it since its a lot to maintain. I had it running and it stopped using my gpu following the 35 update. Now it doesn't boot up at all
Is it worth to upgrade to Batocera v36 Beta from v35..? And if so is the Beta stable? I have a PS5000 handheld. There seem to be some mapping problems on Batocera v35 for it..
I have a PS7000 and the last stable build release for that is. V34 but Im using v35 beta. I suggest if you have a spare sd card flash v36 beta to that and create a small test build. If all is OK update your main card. Btw, try remapping your buttons in the controller settings. I had issues on the PS7000 with buttons and controls too but simply remapping fixed it.
V35 is now in release candidate form cause I see v36 beta is now available. Did a quick test but I woulnt recommend updating to that one yet. Has issues. Use v35.
@@fonzitheman Thanks! I would like to know if there's FM Towns support for the PS5000 maybe/hopefully in Batocera 36.. that would be awesome. But probably the games wouldn't run that good i assume.. maybe in v37😁 I did read on Batocera FM Towns Wiki that Mame does run FM Towns somehow. I wonder if the games maybe already do run on a PS5000/7000..? (by just putting them in the Mame folder and putting the right Bios in the Bios folder(?))
Copying a comment I posted elsewhere: Steam is having issues, something about a flatpak update causing issues. From the discord it seems that they may stop officially supporting it since its a lot to maintain. I had it running and it stopped using my gpu following the 35 update. Now it doesn't boot up at all
Sounds suspicious that they might stop supporting it. It was working fine until their latest update. They might want us to adopt SteamOS instead of using anything else.
@@BatoceraNation I know I was very excited to be playing some of my steam games on Batocera, but it had been an issue since 35. Perhaps you can get some clarity from the team, as it seems to be a flatpak problem, hopefully there is some kind of resolution to be found
question pls in batocera after set hotkey in retroarch and save if exit go open a game and close it i find hotkey back to default how can set my own hotkey and save it without change ? and thanks
Hi my mini pc specs is and ryzen 3 2200g with 16gb ram..can it play smooth swictch games? Or needs fix of some high end games? I am playibg crisis core reunion using yuzu it needs better fix cause it lags in some battle scene..whats better fix?
Everyone talking about going back… so u just flash the old os over it or how does that work exactly? I want to try 35 but don’t want to lose all the work I put in just in case 35 isn’t working well
Rg552 v35 build can't play Nintendo DS. The emulator aren't present. Also the build is dated 20220911. the rockpro64 build is from 20220921.. and its the same chip
About yuzu...i didn t know It, once installed all Advance options in other systems go back to Stone Age anyone has a solution for It?also in 35 stabile i can play games only using yuzu early access,ltlle help?
Hi did anyone know why I stuck at black screen after first boot on (USB flash drive) batocera 35 on my PC? and No signal after splash screen..........please help
Will/could there be FM Towns emulation implemented in the next version(v36) of Batocera..? Also wondering if the games would run any good on a PS5000 then..🤔 Anyways that would be more than fantastic! 🤤
Did you say the Sinden light gun is now compatible? I ask because I didn't quite catch what you said. Are you going to go into more detail about how they are compatible?
Here's all the info on all the light guns added to Batocera 35 * add: gun support in emulationstation * add: support for aimtrak lightgun out of the box * add: support for ae lightgun out of the box * add: add virtual dolphinbar (dolphinbar is no longer needed, only a simple wiibar) * add: wiimote calibration (the wiimote is now precise and can be used as a gun without drawing the target on screen ; press home button for 3s to calibrate) * add: sinden gun support. Borders are automatically added to bezels. * add: guncon support (as any other gun to any system supporting guns) * add: mame standalone udev gun driver.
@@retroman-- Thank you ever so much. That is fantastic news for people who want to play light gun games but don't have the knowledge to set it up. Hopefully it encourages people to find out how it works but sadly I can't see that happening lol
@@TBMartin hopefully they watch a tutorial on this channel. Using a wiimote works really well. In the future I'd like to switch to a Sinden gun like you have. Everyone says it's so accurate.
Another great video, thanks as always. I am VERY interested in eduke32, any chance you will be doing a video on these? Had a go myself but cant get it to start.
@@BatoceraNationWere you actually able to enable the High Resolution Graphics pack? For the life of me I can’t figure it out for Batocera and I’ve been able to do it in windows and on my Steam Deck. I can get the stock game to run fine.
Great video I've been patiently awaiting your batocera 35 video since the update dropped. I am however having HEAPS of trouble with wiimote controllers, seems like they pair into "light gun mode" by default, meaning they no longer control the Batocera menu, and additionally it looks like 3rd party wii more drivers were removed, meaning they're not just a lesser choice, they're almost non functional, disconnecting within seconds. Any thoughts or tips?
@@BatoceraNation in using a Wii bar, as you had mentioned in your batocera 35 preview video that the dolphin bar would no longer be the preferred means of connecting. To be clear, light gun works flawlessly, it's wii mote mode that is being troublesome
If you have a Dolphin Bar, try setting your WiiMote from there. It might be that Wiibar might be better for lightgun games and Dolphin Bar for regular Wii games. Although I got it working on my Wiibar. Might be that your WiiMote is generic. I had a generic one too and it did not work as expected. But for the time being try a Dolphin Bar if you have one.
After you install the Bios, you can experiment with the new built-in settings for best results. If you have a newer graphics card, it should be more of the box since you won't need to tweak the settings. Tweaking is more for weaker systems.
I just upgraded from 34 to 35 stable and it broke batocera all emulators including kodi just exit to main batocera menu. I think it's a driver issue with nvidia and my gtx970
@@robertrmdgaming4374 i refreshed my usb stick and still cannot get any emulators to work or even kodi. Seems the config files are conflict on my external hard drive where my roms are located. I even deleted my system folder same thing. And yeah bios sets for v.35 are installed I e en rested no missing files
I'm not too clear since I don't own one. I assume there is an adapter to connect to PC system running Batocera. From there go to the main menu and set it up in Bluetooth and Controllers.
I'm having constant issues with using 2 switch controllers. On Wii u, 1 controller is fine but when I do local co-op the second controller stops input randomly or it is slow input. Anyone else have that issue?
Thanks for the reply, it was an adapter issue. 8bitdo I read in reviews on Amazon you need 1 adapter per controller which is annoying. It couldn't handle my two switch controllers on my bt400 Asus adapter so I now use 1 Asus adapter for switch controller and 1 PS3 mayflash adapter for PS3 controller
hello friend, as always thanks for the video, you inspire me to continue forward with my channel. I wanted to ask you a question, to know if it has happened to you and you know how to solve it. For a while now, the automatic lightgun collection doesn't pick up all the games. For example, the Wii platform is not detecting any game for me, despite the fact that in the game information (labels), I have lightgun marked. and also, he has put other games in me, which have nothing to do with them, action or sports games... I did a new installation of batocera to test, I have reviewed configurations, and I do not find the error. Previously, this automatic collection detected well 90% of the titles written as lightgun. I have asked in my community and it seems that I am not the only one to whom it happens, do you know something about this? greetings and thanks, continue with the good work you are doing with the channel!
exist a form to get a old version of batocera? because i have a old pc with 4000 hd graphics and 4 gb of ram, the last version have so much problems just for a group of people, flatpak crash, steam, steam link in just open a app works like for a 10 seconds and crash and dont runs correctly :/, but other aplications like firefox,openarena works as it should be, others persons in github have the same problem in diferents forms and just we have to wait a fast fix sadly, i have to move to windows to play and its a shit for emulate games, anybody knows a solution?
It turns out that you can download old versions of Batocera and find one that best fits your older system. Check them out here: mirrors.o2switch.fr/batocera/x86_64/stable/last/archives/
One of the devs said on the discord that they have no intention of putting yuzu on Batocera officially since they don't want to implement emulation of current gen systems. Anything you find is going to be third party, so your results will vary
I have no idea what's going on there about this issue. This is the first time I've heard about this. Might want to post this on the forums or their Discord. Sorry
@@BatoceraNation Skip duplicate frames=enabled, by default results in heavy stutter, unchecking it, games run perfect. Tried to edit gfx ini without any luck, everytime you boot a game from batocera it keeps defaulting to enabled Btw I am on x64 platform
Thanks for the latest news bro ! I posted to the forum regarding the Rockband / Guitar Hero instrument support. I hope it gets enough buzz to have something done haha
Hope so too!
Huge update, love to see it. I've had trouble with my wii mote getting it setup, so maybe I'll go get a Sinden, those look nice. Hope to see lightgun support for PS2 titles someday
Hi will you be doing an update on how get yuzu working in batocera 35 I've tried everything including starting from scratch with a clean instalation of 35 but had no joy.
Just found this channel. Keep up the great work!
Welcome to Batocera Nation and our community!
It just gets better and better.
It sure does!
10:30 Gut Runner looks fun. I love a lot of Tic 80 games and pico-8...Ill have to try this system. Thanks for showing this game...I'll be playing this one for sure
Batocera 35 really is a big update, so many great features. HyperspaceMadness (MegaBezels creator) and duimon the beautiful bezels for every system makes Batocera so much better than other front ends. I stopped using BigBox once I tried Batocera. So many pluses. I feel bad for people who still use Retropie lol
Maybe a comparison of Batocera vs Retropie could be a good video.
Batocera is the best ALL-IN-ONE for EMU. Competition is wiped out, no need comparison.
@@Joy_Formidable @Retro Man , I thought Batocera was the software you load to the hardware? Do you mean that Batocera doesn't run well on retropies? I just hacked my countercade from one up and some games are decent some are terribly slow like Supermario world for snes. But I assumed its just software on top of the hardware. or am I confusing myself?
@@jfitnesshealth yes is software, ALL IN ONE is intended for software. Honestly raspberry to emulate is a bad hardware.
@@jfitnesshealth Yes Batocera is the operating system that runs on the hardware. It can run on a number of single board computers including the Raspberry Pis. However to get the most out of Batocera, I highly encourage you to run it off a PC. Not only is it faster, but you will have access to many more emulators including the higher end emulators. On the Steam Deck, it can even handle Switch emulation.
Hey, great news for all the batocera fans. I was waiting for the automated detection of the gpu. Now it is here. Thanks to the developers and to you for the news. I made some videos about batocera for the german audience, maybe I will do something new soon - based on the new version. Greetings
Glad that it worked!
I have a problem exiting the game, pressing esc doesn't work, pressing alt+F4, doesn't work, what should I do?
There are many problems when I use an external disk with a black screen and the ps3 emulator does not run games even though I followed all the steps. Thank you.
Hi, do you know why I don't have "advanced system options" when I go into the settings menu but do have "advanced game options?" Like I'm on the Crash Bandicoot game in the PS1 section and don't get the option there or on any other system I've checked.
This has been a great update from Batocera 35, however, there seems to be an issue with Yabasanshiro emulator. When the emulator starts, the audio is more or less consistent but the logo screen takes a dip in frame rate. Then when I play some of the games, this issue persists, even with some tweaking on the menu. This was not a problem in the previous version of Batocera. I was wondering if there's a way to fix this issue.
Really appreciate all your helpful videos! I have a question. How do I bind wii remote to this new sensor bar?
Hello, firstly thanks for all your support with Batocera, amazing jog! When I try run XBOX games in Batocera 35, for all of them it is requesting to insert the disk game! Any tip for me?
Awesome video!!!!!
Thanks!
Is there any way to know what is on Batocera 35 for raspberry pi? I feel like there are a few things mentioned that doesn't work on the pi 4 but works only on PC. Thanks! I found an image with Batocera 32 and curious if there's a reason for me to update. Thanks!
haven't watched your whole vid yet, but switch does not work for me in BAT 35.
I re-downloaded switch files, installed, and it still does not work. I had to go back to BAT 34. Any ideas?
@@classicvwbugs Same for me i've reverterted back to version 34
@@Sirlarrythecat dang it! There's always some hiccup.
Does V34 recognize NVIDIA card? I went down to v33 to try and get yuzu working but it just didn’t recognize my card
@@jorgeacevedo9372 it does.
Is steam still working for you? I cannot get it working and the devs say it has issues installing.
Steam is having issues, something about a flatpak update causing issues. From the discord it seems that they may stop officially supporting it since its a lot to maintain. I had it running and it stopped using my gpu following the 35 update. Now it doesn't boot up at all
Is it worth to upgrade to Batocera v36 Beta from v35..? And if so is the Beta stable? I have a PS5000 handheld. There seem to be some mapping problems on Batocera v35 for it..
I have a PS7000 and the last stable build release for that is. V34 but Im using v35 beta.
I suggest if you have a spare sd card flash v36 beta to that and create a small test build.
If all is OK update your main card.
Btw, try remapping your buttons in the controller settings.
I had issues on the PS7000 with buttons and controls too but simply remapping fixed it.
I would go along with Fonzi's suggestion. Thanks Fonzi!
V35 is now in release candidate form cause I see v36 beta is now available.
Did a quick test but I woulnt recommend updating to that one yet.
Has issues.
Use v35.
@@fonzitheman Thanks! I would like to know if there's FM Towns support for the PS5000 maybe/hopefully in Batocera 36.. that would be awesome. But probably the games wouldn't run that good i assume.. maybe in v37😁
I did read on Batocera FM Towns Wiki that Mame does run FM Towns somehow. I wonder if the games maybe already do run on a PS5000/7000..? (by just putting them in the Mame folder and putting the right Bios in the Bios folder(?))
@@kici5777
You can always try and test that. 😊
Aver since i went in 35 stabile my Steam client keeps crashing in 10 to 20 seconda any solution y all?
Copying a comment I posted elsewhere: Steam is having issues, something about a flatpak update causing issues. From the discord it seems that they may stop officially supporting it since its a lot to maintain. I had it running and it stopped using my gpu following the 35 update. Now it doesn't boot up at all
Sounds suspicious that they might stop supporting it. It was working fine until their latest update. They might want us to adopt SteamOS instead of using anything else.
@@BatoceraNation I know I was very excited to be playing some of my steam games on Batocera, but it had been an issue since 35. Perhaps you can get some clarity from the team, as it seems to be a flatpak problem, hopefully there is some kind of resolution to be found
Thank you my Friends
question pls in batocera after set hotkey in retroarch and save if exit go open a game and close it i find hotkey back to default how can set my own hotkey and save it without change ? and thanks
Unfortunately, you can't change the default buttons or even some of the default settings.
Hi my mini pc specs is and ryzen 3 2200g with 16gb ram..can it play smooth swictch games? Or needs fix of some high end games? I am playibg crisis core reunion using yuzu it needs better fix cause it lags in some battle scene..whats better fix?
Please when you can do a vid on the Sinden Gun.. very awesome I have one and works great in Batocera 35 but might need some help.
My flatpak configuration is empty. How do i get steam
Everyone talking about going back… so u just flash the old os over it or how does that work exactly? I want to try 35 but don’t want to lose all the work I put in just in case 35 isn’t working well
Looking forward to v36.
Changelog shows its adding a certain handheld system emulator.. Not gonna give it away but it ryhmes with Rita 😁
No beta yet.
Awesome! Batocerans have been asking a lot for that one. And how did you know that was the name of my mom? She's never been to Australia!
@@BatoceraNation
I have cameras everywhere 😆
V36 dev version is available
Have updated my Bato test build.
Will see if I can get Vita game to boot, when I have time.
Wasn’t able to find that bios pack. It still up?
Rg552 v35 build can't play Nintendo DS. The emulator aren't present. Also the build is dated 20220911. the rockpro64 build is from 20220921.. and its the same chip
About yuzu...i didn t know It, once installed all Advance options in other systems go back to Stone Age anyone has a solution for It?also in 35 stabile i can play games only using yuzu early access,ltlle help?
Hi did anyone know why I stuck at black screen after first boot on (USB flash drive) batocera 35 on my PC? and No signal after splash screen..........please help
Will/could there be FM Towns emulation implemented in the next version(v36) of Batocera..? Also wondering if the games would run any good on a PS5000 then..🤔 Anyways that would be more than fantastic! 🤤
FM Towns is already supported.
For PC.
Check the rom folders.
@@fonzitheman Yeah i know sadly it's not in the Rom folder. 😐 Maybe the hardware is just too weak..🤷
@@kici5777
For ps5000/7000? Yeah. Its not for those.
Its for X86 64 PC.
Awesome Stufff so far...loading games Scrapping and using the sinden lightgun...)but could use a calibration for it...
Enjoy it!
Did you say the Sinden light gun is now compatible? I ask because I didn't quite catch what you said.
Are you going to go into more detail about how they are compatible?
Plug the sinden in and away you go, I did it with mine.
Here's all the info on all the light guns added to Batocera 35
* add: gun support in emulationstation
* add: support for aimtrak lightgun out of the box
* add: support for ae lightgun out of the box
* add: add virtual dolphinbar (dolphinbar is no longer needed, only a simple wiibar)
* add: wiimote calibration (the wiimote is now precise and can be used as a gun without drawing the target on screen ; press home button for 3s to calibrate)
* add: sinden gun support. Borders are automatically added to bezels.
* add: guncon support (as any other gun to any system supporting guns)
* add: mame standalone udev gun driver.
@@retroman-- Thank you ever so much. That is fantastic news for people who want to play light gun games but don't have the knowledge to set it up. Hopefully it encourages people to find out how it works but sadly I can't see that happening lol
@@TBMartin hopefully they watch a tutorial on this channel. Using a wiimote works really well. In the future I'd like to switch to a Sinden gun like you have. Everyone says it's so accurate.
@@0ldSkoolgenx definitely works with mame. Having issues with Naomi and ps2.
Batocera 35 also supports system suspension/sleep, which wasn't available in 34
where is the info on this?
anyone know how to play voxel doom with gzdoom in batocera v35?
👍👍👍
you're welcome - please note the orange pi board support has not been released due to bugs
Please help, since I updated to 35 all my PS2 saves have disappeared along with my save States, have they been moved or worse, deleted??
find cheats to progress forward
Another great video, thanks as always. I am VERY interested in eduke32, any chance you will be doing a video on these? Had a go myself but cant get it to start.
I believe I will. I'm more of a Duke Nukem fan than Doom. The enhanced graphics look great. So I need to do a tutorial.
@@BatoceraNationWere you actually able to enable the High Resolution Graphics pack? For the life of me I can’t figure it out for Batocera and I’ve been able to do it in windows and on my Steam Deck. I can get the stock game to run fine.
Any updates on the process to add Yuzu and Ryujinx emulators and games?
New tutorial is coming this Sunday at 10:00 am ET. Just 3 more days.
do I need usb c hub to move bios or can I do it in windows?
There is a way to do it in Windows but it's hard to explain. Hub is easier for now.
@@BatoceraNation actully it was just a simple setting in batocera os enabled it for me to do it on windows, thank you
Is there anywhere i can get Batocera as an ISO?
Great video I've been patiently awaiting your batocera 35 video since the update dropped. I am however having HEAPS of trouble with wiimote controllers, seems like they pair into "light gun mode" by default, meaning they no longer control the Batocera menu, and additionally it looks like 3rd party wii more drivers were removed, meaning they're not just a lesser choice, they're almost non functional, disconnecting within seconds. Any thoughts or tips?
Are you using the Dolphin bar or the Wii bar?
@@BatoceraNation in using a Wii bar, as you had mentioned in your batocera 35 preview video that the dolphin bar would no longer be the preferred means of connecting. To be clear, light gun works flawlessly, it's wii mote mode that is being troublesome
If you have a Dolphin Bar, try setting your WiiMote from there. It might be that Wiibar might be better for lightgun games and Dolphin Bar for regular Wii games. Although I got it working on my Wiibar. Might be that your WiiMote is generic. I had a generic one too and it did not work as expected. But for the time being try a Dolphin Bar if you have one.
In v35 is ps3 setup to go out of the box?
After you install the Bios, you can experiment with the new built-in settings for best results. If you have a newer graphics card, it should be more of the box since you won't need to tweak the settings. Tweaking is more for weaker systems.
I just upgraded from 34 to 35 stable and it broke batocera all emulators including kodi just exit to main batocera menu. I think it's a driver issue with nvidia and my gtx970
It broke my switch emulation. Had to downgrade to v34
@@robertrmdgaming4374 i refreshed my usb stick and still cannot get any emulators to work or even kodi. Seems the config files are conflict on my external hard drive where my roms are located. I even deleted my system folder same thing. And yeah bios sets for v.35 are installed I e en rested no missing files
is teknoparrot supported now
Nope.
Unfortunately not. One Develper looked into it and said it was complicated due the fact that the games run in different versions of Wine.
@@BatoceraNation will it be in future
@@markstevenson621 if TeknoParrot release their source code, yeah sure; or if they port it to linux.
How does the original G-con work on Batocera sir?
I'm not too clear since I don't own one. I assume there is an adapter to connect to PC system running Batocera. From there go to the main menu and set it up in Bluetooth and Controllers.
@@BatoceraNation so guncon 1 or guncon 2 with usb sir
@@LightgunLegends GunCon2 only and you need a CRT.
@@Tovarichtch perfect thank you very much sir!!!!!
I'm having constant issues with using 2 switch controllers. On Wii u, 1 controller is fine but when I do local co-op the second controller stops input randomly or it is slow input. Anyone else have that issue?
mmm, i think its a problem of bluetooth o the emulator
the true you can to buy like a adapter like a 8bitdo adapter to fix that problem, but its just in the case if you dont find the solution
Thanks for the reply, it was an adapter issue. 8bitdo I read in reviews on Amazon you need 1 adapter per controller which is annoying. It couldn't handle my two switch controllers on my bt400 Asus adapter so I now use 1 Asus adapter for switch controller and 1 PS3 mayflash adapter for PS3 controller
Good to know. Thanks for sharing!
hello friend, as always thanks for the video, you inspire me to continue forward with my channel.
I wanted to ask you a question, to know if it has happened to you and you know how to solve it.
For a while now, the automatic lightgun collection doesn't pick up all the games.
For example, the Wii platform is not detecting any game for me, despite the fact that in the game information (labels), I have lightgun marked. and also, he has put other games in me, which have nothing to do with them, action or sports games...
I did a new installation of batocera to test, I have reviewed configurations, and I do not find the error. Previously, this automatic collection detected well 90% of the titles written as lightgun. I have asked in my community and it seems that I am not the only one to whom it happens, do you know something about this?
greetings and thanks, continue with the good work you are doing with the channel!
Hi there! I will have to ask Nicolss about this.
exist a form to get a old version of batocera? because i have a old pc with 4000 hd graphics and 4 gb of ram, the last version have so much problems just for a group of people, flatpak crash, steam, steam link in just open a app works like for a 10 seconds and crash and dont runs correctly :/, but other aplications like firefox,openarena works as it should be, others persons in github have the same problem in diferents forms and just we have to wait a fast fix sadly, i have to move to windows to play and its a shit for emulate games, anybody knows a solution?
It turns out that you can download old versions of Batocera and find one that best fits your older system. Check them out here:
mirrors.o2switch.fr/batocera/x86_64/stable/last/archives/
@@BatoceraNationthaanks :D, greetings from chile and nice videos, i will try lucky in batocera 34, pd:sorry for the bad redaction, i guess hahaha
like from AUS but we still need a better wiimote tutorial without a dolphin bar!
Update us with yuzu on 35 please
Updated and it's broken some things like switch is now not laoding, had to downgrade.
Will yuzu run if i downgrade to 34?
New tutorial is coming this Sunday at 10:00 am ET. Just 3 more days.
Yuzu is no working as expected in 35
Yuzu is not part of Batocera, there is a unofficial source.. and its actually working really good on v35. 😂
@@DarkdaemonEU i never said it is lol and btw can u share the source as for me it's not launching games from frontend right now
He's going to do an update video soon.
One of the devs said on the discord that they have no intention of putting yuzu on Batocera officially since they don't want to implement emulation of current gen systems. Anything you find is going to be third party, so your results will vary
Kevin could you share atleast
Updated to 35 got boot error
What does the Boot error say?
@@BatoceraNation only boot error on the screen, had no problems with batocera 34
System link?!? 😮I need to build another machine for netplay now!
System link is a game menu option in Halo 2 and I suspect in other Xbox games.
Does Bactocera has xbox360 emulator
Not officially, but he'll do a video soon showing how to add it manually
they still havent included the option to DISABLE=skip duplicate frames on Dolphin, despite taking it all the way to developers on discord!!!
I have no idea what's going on there about this issue. This is the first time I've heard about this. Might want to post this on the forums or their Discord. Sorry
@@BatoceraNation Skip duplicate frames=enabled, by default results in heavy stutter, unchecking it, games run perfect.
Tried to edit gfx ini without any luck, everytime you boot a game from batocera it keeps defaulting to enabled
Btw I am on x64 platform
Neo Geo games stopped working with v35. I didn't try it with v34 so have gone back to v33 as I had a backup.
I think you need to update your rom set for v35.
I had no issues when I updated to v35
Neogeo and Negogeo CD still work as before for me.