btw, they did not do a site survey before installing? I believe a site survey is strongly recommeded before any installation works to be done or agreed upon
Yes, max BMW PHEV 3.7kW which takes 2 hours of charging assuming below 10%. 3 Pin plug charge will takes 4.5 hours to full. My line of work does lots of short travels so I need my X5 to be juice up quickly
Hi i m going to set it up a wallbox for my apartment complex . So i want to know if i can see other user’s usage in the future if they want to use my own wallbox ?
If you're using the same BMW i-Wallbox as me you can set the system to RFID only. So without it, the system won't allow the charge, therefore preventing stealing
@@chestercheng75 Hi Chester. I bought a X5 and installed a BMW wallbox Gen2 recently but only getting charged 50% after 8 hrs. Can you share your dip switch setting
Hello sir. I booked an i4 and it should arrive early next month. So how much is your wallbox, i would like to install mine so i don't have to visit the bmw dealer often.
I need it to juice up my X5 quickly as I do lots of short travelling due to my work as real estate agent. If I'm doing office 9-5 job, then I don't need it. But then again I'm also preparing to upgrade my wife e84 x1 to BEV in 2 years time, so just preparing the setup
I got a same wallbox with u. Do u know how to setting the dip for 22kwh(32A)?
I have no idea. Need to check the manual
Suggest you change the Cap Ayam brand RCCB and MCB to a reputated brand such as Hager or ABB
The one I'm using not reputable?
@@chestercheng75 EPS Is cap ayam brand. You can't even find the company info or website
hi chester cheng do you have any idea where can buy RCCB 30ma - 4p
type A
Most of your local electrical hardware store will sell them
Hi, do you mind sharing the dip switch setting ? Thank you.
I need to open up and take the pictures. But you can find this information at the forums
May i know from which forum? TQ
btw, they did not do a site survey before installing? I believe a site survey is strongly recommeded before any installation works to be done or agreed upon
Yes, done all that, Electrician came, TNB came and lastly EVSE installer
I thought BMW PHEV can only takes up 3.7kwh max?
Yes, max BMW PHEV 3.7kW which takes 2 hours of charging assuming below 10%. 3 Pin plug charge will takes 4.5 hours to full. My line of work does lots of short travels so I need my X5 to be juice up quickly
bos..can share what brand and what ampere of rccb...mcb and isolator？
RCCB Hagen DBA663D - 63A
Isolator Elica - 35A
Hi i m going to set it up a wallbox for my apartment complex . So i want to know if i can see other user’s usage in the future if they want to use my own wallbox ?
If you're using the same BMW i-Wallbox as me you can set the system to RFID only. So without it, the system won't allow the charge, therefore preventing stealing
Does this charger comes with apps?
Nope
Wah nicela bro!! haha
Hi bro, planning to get bmw wallbox. How much brand new frm bmw ?
I brought used. But brand new. Not too sure how much a new one for BMW
Hi bro, js bought bmw wallbox, may I hv the installer contact?
How much thy charge ?
Can I install a BMW wall box and use it for any EV? Is it specific for BMW only?
Any EV that uses Type 2
Do you need a app or rfid to use it? Asking as I just bought a home that has a bmw wall charger and want to use it on a Chevy bolt
No. You can disable the RFID function
Does the wall charger make some miner noise?
Yes, is does during initial charging
How long does it take to fully charge your X5 with 22kW? Thanks
Depends on how low % of battery. But my X5 can only charge at a maxed speed of 3.7kwh
Check with you, do you know the setting inside?
Yes, more or less. Installer showed me the settings using the manual. Quite easy to switch if you need to step up/down
@@chestercheng75 when you unplug from your car, did the wall box still blinking the RFID sign?
@@liangwei84 I disable the RFID since the i-wallbox just at my porch
@@chestercheng75 Hi Chester. I bought a X5 and installed a BMW wallbox Gen2 recently but only getting charged 50% after 8 hrs. Can you share your dip switch setting
Bro, May I know if BMW Wallbox can be install on single phase ? Or must be 3 phase?
This BMW wallbox is scalable. Can support single phase 10A to 16A but limited to 7.4kW. If 3 phase can go up to 32A 22kW
@@chestercheng75 thanks so much for your info sir 🙏
Hi where did you purchase this unit. Cost
I brought it used from another X5 onwer. I think you can get one used for about Rm3k
@@chestercheng75 thanks, do let me know if you come across another unit
How much is the installation fee?
Depending on your setup, you have to get a quote from them
Hi can I have picture rccb or elcb you one install
Send me an email
5:16 co jest mierzone miernikami?
As I know the wires needs to be 6mm thickness
@@chestercheng75 nie pytam o przewody, a o to co mierzą miernimami elektrycznymi na wyjściu DC
Hi Bro, May ask how much the labour fee for this installation wallbox?
It's depending a lot on your current setup. For mine only cost RM400 from the insulator
Bro. Do you mind to share contact of the installer. Thank you
How much is this please? I have a Volvo XC90 Recharge
I brought my from private seller who also owned X5 40e. I seen some selling between RM3k-4k at fb and lazada
Hello sir. I booked an i4 and it should arrive early next month. So how much is your wallbox, i would like to install mine so i don't have to visit the bmw dealer often.
I brought mine brand new from another X5 40e owner around Rm3,8k. There is a seller at Lazada selling new BMW i-wallbox. Btw congrats to your i4
@@chestercheng75 tq for the info. So about the installation, the installer recommended by BMW or there are people who know how to install it.?
Hi Bro... mind sharing the contact details of the installer.. planning to install the BMW Wallbox at my home... thanks in advance...
0 1 7 4 5 3 7 7 5 0
Hi bro, can forward me the contact of your installer. Need someone to install my wallbox. Thank you in advance.
You can try contact him Kevin 0 1 7 4 5 3 7 7 5 0
Really? Do you actually need a Type 2 charger for a PHEV? Labor cost must be cheap where you live.
I need it to juice up my X5 quickly as I do lots of short travelling due to my work as real estate agent. If I'm doing office 9-5 job, then I don't need it. But then again I'm also preparing to upgrade my wife e84 x1 to BEV in 2 years time, so just preparing the setup
How much was the wallbox bro?
I brought from another X5 owner. Brand new but 2nd hand for about Rm3.8k
@@chestercheng75 Thanks!
@@chestercheng75 Nice. Any issues so far?
hi, can you share your electrician and also the wallbox installation phone number? thank you
Here you go. 0 1 7 4 5 3 7 7 5 0
I don't see the need of isolator
Without isolator will be on zombie mode 24 hours 365 days
Can share contact?😊
You can try contact him Kevin 0 1 7 4 5 3 7 7 5 0
Ale ludzi to montuje.... Ja w 3 godziny sam zrobiłem...
They installer also did reprogramming and testing together
𝕡𝕣𝕠𝕞𝕠𝕤𝕞 💥