Updates and Corrections Last updated: 9/27/2023: -The RC 2 can indeed record audio through the use of the single USB C port . I've tried it, and it works the same as on the previous model with the only differences being that you'd connected it to the single Usb C port on the RC 2 and that there is no acknowledgement by the controller that it is connected. You can continue to record audio to your screen recordings and videos just fine. - I seem to have forgotten to mention a few things. You can check them out in Part 2: ruclips.net/video/6WRC0MhVs60/видео.html - The new synthesized voice prompts are available on the RC via update. The new voices prompts sound less robotic, as mentioned
I have the Mini 4 pro with the RC2, and since this video they have indeed added more compatibility. For example, I can plug in a 2TB SSD into the USB C port, I can plug in an External Monitor to the USB C port, I can even plug in my Quest 2 headset and output the video to it via HDMI Over USB C from the RC2. It seems to have "Host" built in, or acts more like a thunderbolt port now. Great Video!
great comparison video! thank you so much! I just received my mini 4 pro a couple of days ago. I did notice that the body had changed slightly, the silicon controller cover from the RC does not fit the RC2, the biggest difference is right by the control wheels. thanks again for creating and sharing this!
Nice review of the two RC controllers.I have the RC and the RC 2. I would like to see the RC 2 get backwards compatable with the Mini 3 pro and the Air 2S.
Dji actually does an exceptional job of taking care of consumer and assuring every update/release is not a money grab. Just speaking comparatively, this day and age, other companies are much much worse
I have really enjoyed and learned from your videos. Thanks very much! I have a Mavic 3 Classic and am considering getting an Air 3. I have seen a couple of RUclips videos of range tests between these two aircraft, but they were done in an urban environment, so you really didn't have a conclusive case that the operating range was better with OS4 versus earlier versions. Since you are in an area with great visibility and open space, it would be great if you could do a range test and compare when you begin to lose bars with OS4 and OS3/3+ when you have time. Here in Maine, we have a lot of foliage, and from what little I have seen, OS4 in the Air 3 does a much better job of penetrating foliage, which would be a major reason for me to upgrade. Your recent video of active track on the Air 3 prepared me to be very cautious in wooded settings -- thanks for that too! Having had a couple of crashes due to hitting tiny bare twigs the aircraft did not detect, I am sensitive to this problem! It is great to see the part of the country you live in. When I was a little kid we lived in the Broadmoor section of Colorado Springs, and it remains as beautiful as ever! Keep up the great work!
Glad you enjoyed the video. If I'm being completely honest, I am not necessarily into range test as much but I'd be willing to do one given the right situation. The Broadmoor area is definitely great area to view and escape to, I agree. I do most of my test at an area near the Bear Creek dog park and considered doing a range test there however there is a restricted or rather constrained area around there that I'm quite cautious of. I know that O4 would definitely go much farther for sure but I don't want to fly over any neighborhoods so this is a test I would most likely do in the future maybe somewhere like Guanella pass since there is literally no one at the summit most of the time. If you haven’t already purchased an Air 3 by then I hope you'll look out for that test. Ill let you know if and when this test will be possible.
You mentioned the lanyard screws on the back, but not the ones on the bottom (where the sd card slot is). Are those the same distance apart or also slightly different?
Do you think the RC 2 would significantly increase the range and signal strength of the Mini 3 Pro? My Mini 3 Pro + RC has pretty terrible signal strength, much worse than my older Mavic 2 Pro with its original controller.
If I had to speculate, I'd say that it wouldn't increase the range per say but it would stabilize the signal in areas that would have a lot of interference. If you're losing signal bars regularly, then the RC 2 (if and when compatible) would make it so you don't lose that signal as easily.
In all honesty, I completely overlooked trying this. You're correct it does indeed work. I'll do a video on this soon. Would you mind if I gave you a shoutout?
Let me know when you send it out , I bought a cable today but it was a cheap adapter and it didn’t work , I will have to find the right cable from usbc to hdmi Thanks
Great video my brother! Very informative and well done! I currently have both RC controllers and they work excellantly with my DJI MINI 3 PRO and my latest DJI AIR 3. DRONE PILOT from Ohio.
So you're saying that your DJI MINI 3 PRO is compatible with your RC2????? Cause I just got off the phone with DJI and they stated that it they still have not made any changes to make them compatible. Whats going on here?
Hi do think there is any difference in flyability that is the ability to do complex maneuvers with the sticks gimble etc between the RC N2 and the RCN? I mean the remote without the screen and the one with the screen? Is there a quality diffrence between the remotes that allows for better flying? Thanks Great video.
From my personal experience, I'd say that there would be no difference at all when it comes to the sticks on both. I believe all of the RC controllers use the same exact sticks and they can be switched out for alternate choices you can find on places like Amazon.
The RC 2 can indeed record audio through the use of the single USB C port . I've tried it, and it works the same as on the previous model with the only differences being that you'd connected it to the single Usb C port on the RC 2 and that there is no acknowledgement by the controller that it is connected. You can continue to record audio to your screen recordings and videos just fine.
Unfortunately, it doesn't. I still think there is a possibility that it could, but right now, the RC 2 is only compatible with the Mini 4 PRO and AIR 3.
You mentioned the 2 screws underneath of the for mount that are not the same. How about the screws at the bottom? Do they have the same distance between them?
Add NOW it is compatible with the new Mini 4 Pro, the new min-monster! BTW, a drill can easily solve your problem with the lanyard attachment - just drill one side...
Much appreciated. You are certainly correct. Some of it was filmed on Old Stage Road leading up to the ranch whose name I forget right now LOL. There is no mistaking that mountain with the graffiti on it.
I never tried straight type c to type c, but if any one of them would work with something like that, it would be the RC 2. I just don't have anything that takes video in to try it out.
Are you able to connect an external mic via the USB-C port to record audio via screen recordings on the RC2 as you are on the RC?? Please say yes......
Great video. I am one of the unlucky ones that has an RC_PRO and at this time unless they do a firmware update to work with the RC_PRO I an not spending any more money on DJI drone upgrades.
Much appreciated. Definitely not unlucky at all the RC Pro seems to be built on the same exact platform or with similar specifications to the RC. As a matter of fact the RC is more of an offshoot of the pro, so I'd say that they can make it compatible also. You just wouldn't get the same range due to it not having O4. At some point, when I can find an RC Pro for a good price I might make another video but nonetheless if they make the RC compatible they'll make the RC Pro compatible for sure.
@chriscflint I have a good feeling about it. Nah, no need for that, lol. He will get what's coming to him. Life will make sure of that. I don't blame the dogs, I blame his willful idiotic stance on life.
Sir you are the God of reviews. Hi I am just about to buy an Air 3 as I crashed my Air 2S. If you had to do it again would you buy the Air 3 ? Also do the RC 2 and the RC N2 fly equally as good as each other. Is it possible that the RC 2 allows you to fly more smoothly etc because it is a higher quality piece of machinery? I ask this because I am trying to do manually many of the orbit moves etc that I have relied on the automation ie active track to do, and I find the RC N2 a bit cheap and clunky. Finally where did you find the RC 2 for $168? Thanks you are awesome.
Lol, I wouldn't say god, but I'm glad you enjoyed it. I would definitely get the AIR 3 only because of the increased dynamic range you'll get from it. However, I've never tried the Air 2S either, so I can't really compare both . Having the extra 3x camera definitely makes the Air 3 more versitile also. I don't think the rc2 would allow you to fly smoother in any way. That's going to be more based on your settings and calibration of the joysticks and the drones flight. From my experience, doing those moves manually is just more about getting into the repetitive motion of how to do them. Muscle memory will take over from there. The RCN2 is still good to have around, especially if you wanted to connect it to a bigger screen. The $168 price was for the original RC. That prices something I was able to find on eBay.
Hoping right along with you. It just seems extremely awkward that they would only release two drones that work with this controller when they have many pre-existing out there.
After watching your breakdown, it looks to me like the DJI mic receiver won't work plugged into the RC2. Was hoping it would so that in screen record, you could a voice.
Apologies for the confusion. It does indeed work. I've tried it and it works the same as on the previous model. The only differences is that there is no acknowledgement by the controller that it is connected.
Glad to hear that.Mine has just arrived and is being charged up at this moment. Looking forward to trying. Already have the Mini3pro and Air2 and Air2S@@WIHRC
Thanks for the excellent comparison. The offline maps feature on RC2 (and I believe on RC and RC-Pro) apparently limits you to downloading map files sizes of 3MB which in my area amounts about a ~3mi X ~2mi map area (aka TINY area). And this means to get map coverage for a reasonable size area (which IMO is 25miles) you'd have select, download and re-name MANY map snippets in order to get this level of map coverage. And that makes the offline maps basically useless as far as I'm concerned. I called DJI support and asked them what was behind this limitation and support claimed it was an Android limitation...not their limitation, hmmmm???? .....which as far as I can tell from my research is complete BS because AFAIK the limitation of file transfer under FAT32 in Android is 4GB (not 3MB). Are you aware of any workaround to the 3MB map files size? Are you aware of any Android limitations that might limit the file transfer size to only 3MB or DJI just BS'ing us?
I saw this and wanted to wait until I had an answer. From what I can see, it's a bit of both DJI and the forced limitation of the version of Android they're using. I tried saving some maps on the RC2 (just got it again with the MIni 4 Pro), and the biggest portion I could save was up to 4.1mb. I also tried doing this on my phone, and though the amount of data I was able to save was a bit higher, I could still only save a portion of a map and not something like a whole state. The limitation seems to be more on the Google side of things. I haven't tried to save any maps on my phone in a long time, but I'm using Android 13, which is the second to the latest update. It all comes down to what seems like Google not updating the ability to save maps beyond a small area. Hope this helps
@@WIHRC Thanks for the follow up. BTW, on Android 10 I was able to successfully download a Google offline map that was 190MB. Which was quite a large area (Entire San Diego Metro area). So given that is this really an Android limitation or a DJI limitation. Based on my testing it seems to be a DJI limitation. The other thing I've noticed is that when I save a map snippet of a specific area and then open saved snippet it's point to a different map snippet then what I asked it to save. Have you see that problem. Also if you zoom in and out on the map occasion the map area will become so small that you can barely see it on the map at all. It seems to be a very buggy application IMHO.
No problem. After reading your latest comment, I'm starting to see where this could be more of a DJI limitation. It's seems like they might have limited this feature due to storage limitations on something like the RC. My guess would be that the quality and allowed save size of these maps might be tied to all 3 of DJI's controllers being limited to 1920 X 1080 displays. I wonder if the difference when doing this on an Android device like a Pixel or Samsung is the fact that the maps save based on the resolution, or maybe it could be dependent on the area and the amount of data needed to save that area with all of its details (thinking of how your map of San Diego came out to 190mb). Also I haven't had the issue of my RC showing me a different portion other than what I had saved, but I did have an issue when doing a waypoint mission where the mission parameters I set with the C1 button were almost completely ignored. Wonder if that might be connected somehow to the portion of the map I saved. .......yeah this is definitely starting to seem more and more like a DJI issue or rather a poor implementation on their part.
Hello I thank you for this video only one that explained RC2 battery. I just got a Mini 4 Pro and I was wandering real world battery life time for you? The battery lasts two flights or so doesn't seem normal. Again thank you for explaining.
Glad that the information in the video was helpful. That does honestly seem underwhelming. Realistically when I'm using the RC to the battery tends to drop about one to two notches but then again this could also have something to do with the temperature surrounding the controller. Either way I would definitely look into seeing if you can get a replacement if you're still within the return policy. It might be annoying to set everything up again but it's better to know that you have things working the way that they are supposed to.
I'm seeing 1280 X 720 for the screen recording based on one I pulled for an upcoming video. I honestly don't use the cache video, but I'd assume it's going to be the exact same. I'll take a look when I get a chance and let you know.
@jeanbouhnik looks like it. I just looked at another recording from my mini 3 pro, and the res is lower. Honestly, it's not something I ever took notice of before. Thanks for pointing this out. Would definitely be better if they would just take advantage of the full resolution of the display when it comes to screen recordings.
There's about a 1 sec pause in comparison to the 3 or sometimes more pause I get with the RC. The speed of the RC is surely noticeable all around. Hope that helps.
Very very detailed review. Thank you so much for pointing out the differences and similarities! I am going to sell my Mini3Pro for the Mini4Pro Non Bundle. I get to keep the batteries and chargers and no need for that same damn bag which I have two sitting here since Air2
Much appreciated. I'm glad you enjoyed the video. This is exactly what I did. I bought the base version of the Mini 4 Pro with the RC2 and I'm currently selling my Mini 3 Pro. I'll have to check out the bag for the air to since I've been looking for something smaller.
Unfortunately the RC Pros a little bit too much for my blood right now. I aim to get one in the future but just can't justify the cost right now unless I was able to find it below 800. Once I do acquire one I'll do a comparison between it. Also not necessarily sure if there will be an RC to but I don't see why there wouldn't be.
I have a good feeling that it will be. The RC Pro is ridiculously expensive and I think DJI knows that people would be extremely pissed off if they didn't add compatibility with the air 3.
I bought the RC and to be honest, i prefer the RC-N1. I dont like the screen below my controls and i don't like having to turn hot spot on and connect to it, i prefer the cord. I get better range and it seems like higher quality transmission with the RC1.
Thanks for the very thorough video. I do have one question, have you ever had any problems with the screen going black or switching to the screen that prompts you to go fly while the drone is in flight?
Please let us know how to transfer files as you me mentioned you had a different way to do it than dji from the rc2 also I was struggling with the blue too to transfer , also someone mentioned that you have your phone on airplane mode to do quick transfers is this true ? As the lte signal causes issues , regards
I'm working on making this video pretty soon. I just have a lot of other videos to work on. I haven't seen any significant difference with putting the phone on airplane mode and keeping Bluetooth on, but that's definitely something that's possible. Also, Bluetooth transfer is something that may only work from the RC to an Android phone, being that apple ( to my knowledge) still doesn't allow direct Bluetooth transfers, especially from other operating systems. Stay tuned to the channel for that transfer video.
That depends on what you're trying to do with the drone. Honestly, both are exceptional drones that have their flaws, but if it were me, I'd go for the Air 3 since you can buy it with the Fly more combo for a similar price as the Mavic 3 classic brand new. You'll also be getting two cameras and better battery life with the Air 3. Of course, the big advantage of the Mavic 3 Classic is that 4/3 sensor, which will give you the utmost detail in every situation, but that just means you'll have to do more work to get that detail out of the Air 3.
I was about to buy sun shade for the RC2 and thanks to your video, in understand original RC has different shape so it won't fit.Btw if someone has suggestions regarding screen sun shade... Thank you
The DJI RC is not running the most recent software. This is why the audio voices sound different. DJI updated their fly app a while ago with different voice talents
Also how did you connect it to your computer when the cable is usbc , what adapter did you use to the computer Also I tried the blue tooth today and it didn’t work it connects with my phone but keeps saying failed when I transport Can you do a blue tooth video Also please let know when you do the Video with the transfer of files to the phone from the rc2 not the drone I struggle with this
Took long to answer this cause i was creating the video that will answer all of these questions however to answer in written form: No adapter. I have a dock the has both type C and Type A ports. All you need is the appropriate connection for your computer and a type c on the other end to connect to the controller. What OS is your phone running on? I have a video on how to transfer files coming out today at 2pm MDT that might answer this question.
@eitanfine5185 your welcome. Sorry I should have been more precise with that question. What device were you using to transfer over Bluetooth? Like Apple, Android or Windows?
Wow! Great video. Had my air 3 for a couple weeks now and I am blown away by it. Yes I would love to see how you transfer stuff as I am struggling with. Just subscribed! Thank you
Thanks for watching, and I'm glad you enjoyed the video. The air three is definitely an amazing UAV to fly. I'm currently working on a few videos but file transfer is definitely one of them. I'm hoping to have that video out before Monday we're by Monday at the latest. I appreciate the sub and you should get a notification once I'm done with that video. Thanks again.
@glennalan just finished filming that video. Should be out tomorrow or maybe even really late tonight. FYI: It's a little rough, but should give a decent amount of info.
Definitely can't argue with this. I usually don't have an issue seeing it in bright sunlight but that's also because I'm adjusting the position of the controller without even thinking about it. I also refuse to get one of those hoods to put over the screen since I like to be aware of my surroundings at all times.
What is also dramatic is the non-compatibility with goggles 2/Integra (O3), RC Pro, air unit,... . I own nearly all latest DJI products (Mini 3 Pro, Mavic 3 Cine, Avata, FPV, and even an Inspire 1 and a Mavic 3T). If not retrocompatibility from O4 to O3 protocol, forget me DJI to buy your latest products. No need of Air 3 and no need for new release of Mini 4 Pro coming in few months. Quite simple.
I have a good feeling that at least the stones you mentioned will be compatible at some point. The RC2 seems to have all that it would need to be backward compatible.
Believe me I hear you. From what I've seen they've been pretty responsive to user feedback and on top of that even though they pretty much have a monopoly on the Drone Market they wouldn't want to lose that so all we can do is keep our eyes open and our ears open even wider. I get exactly where you're coming from since you own so many of their products. I don't know anything for sure but something just tells me that they wouldn't just alienate all of their fan base especially with the fact that drones like the mavic 3 and Mini 3 Pro are so new in a sense, but again we'll have to wait. It did take the RC a while to be compatible with other drones like the mavic 3, air2s, Etc.
@@WIHRC Perhaps, but another example is also bad: DJI Mini 3 (not the pro) is O2, and can be used with RC-N1, RC... but not with RC Pro. This is inconsistant. DJI had plenty of time to make something for Mini 3 to work with RC Pro, but nothing up to now. But you can pilot Mni 3 Pro, Air 2S and of course Mavic 3 with RC Pro.
@SamcroHD fair enough. I honestly think the Mini 3 is more of a re-skinned mini 2 with some added features, and this is what I said in my review of the mini 3 and I believe I also stated the same in my comparison of the Mini 2 and Mini 3. It's not a bad drone, but if you stay on the surface and just look at the outside of it, then you miss what's going on on the inside. I appreciate you letting me know about the compatibility difference between the Mini 3 and RC Pro. I plan to buy an RC Pro when I can find one for a good price, and this will be something that I definitely mentioned whenever I do get one. It'll be interesting to see what happens with the RC2 months from now, but I can understand if you're not holding your breath with it. I just hope that it does become compatible so that your money isn't wasted on the drones you have.
Updates and Corrections Last updated: 9/27/2023:
-The RC 2 can indeed record audio through the use of the single USB C port . I've tried it, and it works the same as on the previous model with the only differences being that you'd connected it to the single Usb C port on the RC 2 and that there is no acknowledgement by the controller that it is connected. You can continue to record audio to your screen recordings and videos just fine.
- I seem to have forgotten to mention a few things. You can check them out in Part 2:
ruclips.net/video/6WRC0MhVs60/видео.html
- The new synthesized voice prompts are available on the RC via update. The new voices prompts sound less robotic, as mentioned
I have the Mini 4 pro with the RC2, and since this video they have indeed added more compatibility. For example, I can plug in a 2TB SSD into the USB C port, I can plug in an External Monitor to the USB C port, I can even plug in my Quest 2 headset and output the video to it via HDMI Over USB C from the RC2. It seems to have "Host" built in, or acts more like a thunderbolt port now. Great Video!
I would like to see a comparison between RC 2 and RC N2. In terms of transmission and range.
An excellent, extensive review of the differences, with good-paced narration. I'm subbing. Greetings from Montreal, Canada.
Thought I responded to this. Thanks much I appreciate it and I'm glad you found the video useful.
Great video! Glad to hear the CPU/GPU is more snappy. The RC was definitely laggy. Good news!
I'm glad you enjoyed it. I agree. After using the RC 2, it's hard to go back, but I'll have to wait till it's compatible with older drones
great comparison video! thank you so much! I just received my mini 4 pro a couple of days ago. I did notice that the body had changed slightly, the silicon controller cover from the RC does not fit the RC2, the biggest difference is right by the control wheels. thanks again for creating and sharing this!
Happy that the information within this video was able to help.
Don’t have a drone yet but enjoyed the information you shared. Thanks
Glad this video could help in your decision. Which one are you going with?
Nice review of the two RC controllers.I have the RC and the RC 2. I would like to see the RC 2 get backwards compatable with the Mini 3 pro and the Air 2S.
agreed
Sadly nope
All these controllers should be comparable with every dji drone .. they is just a money move!!! Shame on dji
It will more than likely be fixed as a firmware update in a few months like the RC was
Dji actually does an exceptional job of taking care of consumer and assuring every update/release is not a money grab. Just speaking comparatively, this day and age, other companies are much much worse
RC2 you can use an type c to HDMI to be on a bigger screen when flying!!
Covered this in part 2. Admittedly, I never tested it during the creation of this video.
I have really enjoyed and learned from your videos. Thanks very much! I have a Mavic 3 Classic and am considering getting an Air 3. I have seen a couple of RUclips videos of range tests between these two aircraft, but they were done in an urban environment, so you really didn't have a conclusive case that the operating range was better with OS4 versus earlier versions. Since you are in an area with great visibility and open space, it would be great if you could do a range test and compare when you begin to lose bars with OS4 and OS3/3+ when you have time. Here in Maine, we have a lot of foliage, and from what little I have seen, OS4 in the Air 3 does a much better job of penetrating foliage, which would be a major reason for me to upgrade. Your recent video of active track on the Air 3 prepared me to be very cautious in wooded settings -- thanks for that too! Having had a couple of crashes due to hitting tiny bare twigs the aircraft did not detect, I am sensitive to this problem! It is great to see the part of the country you live in. When I was a little kid we lived in the Broadmoor section of Colorado Springs, and it remains as beautiful as ever! Keep up the great work!
Glad you enjoyed the video. If I'm being completely honest, I am not necessarily into range test as much but I'd be willing to do one given the right situation. The Broadmoor area is definitely great area to view and escape to, I agree. I do most of my test at an area near the Bear Creek dog park and considered doing a range test there however there is a restricted or rather constrained area around there that I'm quite cautious of. I know that O4 would definitely go much farther for sure but I don't want to fly over any neighborhoods so this is a test I would most likely do in the future maybe somewhere like Guanella pass since there is literally no one at the summit most of the time. If you haven’t already purchased an Air 3 by then I hope you'll look out for that test. Ill let you know if and when this test will be possible.
Was able to do that range test in a space that was even better than the first. I'll have it up by 10am mdt.
I watched your video. Got an air 3, and now the mini 4 pro is released. Thanks for the content
Thanks! You’re a very good reviewer. That’s why I subscribed. 👍🏾
Thanks. I appreciate the encouraging words.
Great review I’ve personally enjoyed the rc2 with the new Air 3 I just got. You have a volume of information there!
It's definitely an excellent upgrade to the original. Just really really hoping for that compatibility to older drones really soon.
I wonder if this USB C port. Will support HDMI cable !? Thank you very much sir
ruclips.net/video/6WRC0MhVs60/видео.html
Good comparison video. Thanks!
Thanks. Much appreciated.
You mentioned the lanyard screws on the back, but not the ones on the bottom (where the sd card slot is). Are those the same distance apart or also slightly different?
They're the same
@@WIHRC Good to know. Thanks for the info
No problem
thank you - your video was information dense and answered all my questions
Do you think the RC 2 would significantly increase the range and signal strength of the Mini 3 Pro? My Mini 3 Pro + RC has pretty terrible signal strength, much worse than my older Mavic 2 Pro with its original controller.
If I had to speculate, I'd say that it wouldn't increase the range per say but it would stabilize the signal in areas that would have a lot of interference.
If you're losing signal bars regularly, then the RC 2 (if and when compatible) would make it so you don't lose that signal as easily.
Thanks much for your note. This is a seriously good review.
Sounds like they fixed the transmission faults the controller had from day 1 and now they want to make it look like an upgrade now they sorted it out.
Excellent presentation ...thanks
Glad you liked it!
I didn’t see you mention that the rc 2 can attach to an external screen via a usbc to hdmi
In all honesty, I completely overlooked trying this. You're correct it does indeed work. I'll do a video on this soon. Would you mind if I gave you a shoutout?
@@WIHRC sure thing I am glad I could help
Let me know when you send it out , I bought a cable today but it was a cheap adapter and it didn’t work , I will have to find the right cable from usbc to hdmi
Thanks
I tried it and it worked trick is too keep the remote off then connect cable then turn on
Can't you just mount the "hook" on the back 180 deg around? think it would still fit!
Bugger, if I get that correctly on the RC2 you can’t connect the DJI Mic now ??😮
It still works. There's just no indication that it does when connecting it, but I was able to use it just fine
@@WIHRC ohh ok, thanks for clarifying that point.
Nice video as always 😉👍
@AussieAdventurer no problem. I'm glad you got something out of the information
An exceptional informative video! So many details!
Glad you enjoyed it. If you're looking for more info, Pt 2 is available
Waiting for the Rc Pro to be air3 compatible..
Great comparison- very detailed ❤
Thank you. I'm glad you found it helpful.
Great video my brother! Very informative and well done! I currently have both RC controllers and they work excellantly with my DJI MINI 3 PRO and my latest DJI AIR 3. DRONE PILOT from Ohio.
Much appreciated. Glad the info was helpful.
So you're saying that your DJI MINI 3 PRO is compatible with your RC2????? Cause I just got off the phone with DJI and they stated that it they still have not made any changes to make them compatible. Whats going on here?
Hi do think there is any difference in flyability that is the ability to do complex maneuvers with the sticks gimble etc between the RC N2 and the RCN?
I mean the remote without the screen and the one with the screen? Is there a quality diffrence between the remotes that allows for better flying? Thanks Great video.
From my personal experience, I'd say that there would be no difference at all when it comes to the sticks on both. I believe all of the RC controllers use the same exact sticks and they can be switched out for alternate choices you can find on places like Amazon.
Can the RC2 USB-C port record audio?
The RC 2 can indeed record audio through the use of the single USB C port . I've tried it, and it works the same as on the previous model with the only differences being that you'd connected it to the single Usb C port on the RC 2 and that there is no acknowledgement by the controller that it is connected. You can continue to record audio to your screen recordings and videos just fine.
Exahaustive comparison, thank you!
Great video... Question, please: Are any of the add-on antenna signal boosters effective on the basic RC controller? Thanks, Michael
Honestly, this isn't a question I'd be able to answer effectively. I've never had a need to use an antenna signal booster.
Perfect comparison, thank you 🙏🏻🙏🏻🫶🏻
I am able to access the RC2 memory via phone. You have to go into "files" on your phone to find it.
What phone and OS are you using?
Galaxy A52 @@WIHRC
do any remotes work like that with the mavik 2 pro?
Unfortunately no.
00:56 Where is this "right place" that you can purchase the DJI RC for $184 (or $189)?
Ebay. If you type "DJI RC" in the search and switch to "Buy it now" or accepts offers, then you can find them near or at those prices
@@WIHRC Thanks. The listings at the sub-$200 range are all used/pre-owned. I do see a new listing for $230 (plus shipping).
may i ask ? pls answer.
is that mini 3 pro compatible with rc 2 ?
Unfortunately, it doesn't. I still think there is a possibility that it could, but right now, the RC 2 is only compatible with the Mini 4 PRO and AIR 3.
You mentioned the 2 screws underneath of the for mount that are not the same. How about the screws at the bottom? Do they have the same distance between them?
Yes, they're the same size.
Can you live stream with dji 4 pro?
From what I was able to find. You can't, but it does support HDMI or over USB C if you can do something with that.
Add NOW it is compatible with the new Mini 4 Pro, the new min-monster!
BTW, a drill can easily solve your problem with the lanyard attachment - just drill one side...
You did not mention that you can now connect USBC to HDMI monitor now via the appropriate lead. Great for streaming
Took care of this In part 2
Great info. I can't help but wonder if you were filming some of that video on old stage road. It looks familiar.
Much appreciated. You are certainly correct. Some of it was filmed on Old Stage Road leading up to the ranch whose name I forget right now LOL. There is no mistaking that mountain with the graffiti on it.
Does any of them have a type C video out?
I never tried straight type c to type c, but if any one of them would work with something like that, it would be the RC 2. I just don't have anything that takes video in to try it out.
Can I plug in my AR glasses to either of these … to fly fpv , they run on usb-c?
If those AR glasses utilize HDMI over USB C you might be able to.
How many hours RC2 can live with full charge
13:02 in the video
I have the mini pro 3 .would rc2 work with it
Unfortunately, right now, it won't. I still have hope that DJI could make it compatible, but I can't say for sure if band when that would be.
Are you able to connect an external mic via the USB-C port to record audio via screen recordings on the RC2 as you are on the RC?? Please say yes......
You definitely are. It just won't tell you that it's working, but I've tried it, and it works the same.
Great video. I am one of the unlucky ones that has an RC_PRO and at this time unless they do a firmware update to work with the RC_PRO I an not spending any more money on DJI drone upgrades.
Much appreciated. Definitely not unlucky at all the RC Pro seems to be built on the same exact platform or with similar specifications to the RC. As a matter of fact the RC is more of an offshoot of the pro, so I'd say that they can make it compatible also. You just wouldn't get the same range due to it not having O4. At some point, when I can find an RC Pro for a good price I might make another video but nonetheless if they make the RC compatible they'll make the RC Pro compatible for sure.
I really hope you are right. Regarding that Poodle, shoot the bastard next time. Oh and also the dog while you are at it. @@WIHRC
@chriscflint I have a good feeling about it. Nah, no need for that, lol. He will get what's coming to him. Life will make sure of that. I don't blame the dogs, I blame his willful idiotic stance on life.
Sir you are the God of reviews. Hi I am just about to buy an Air 3 as I crashed my Air 2S. If you had to do it again would you buy the Air 3 ? Also do the RC 2 and the RC N2 fly equally as good as each other. Is it possible that the RC 2 allows you to fly more smoothly etc because it is a higher quality piece of machinery? I ask this because I am trying to do manually many of the orbit moves etc that I have relied on the automation ie active track to do, and I find the RC N2 a bit cheap and clunky. Finally where did you find the RC 2 for $168? Thanks you are awesome.
Lol, I wouldn't say god, but I'm glad you enjoyed it. I would definitely get the AIR 3 only because of the increased dynamic range you'll get from it. However, I've never tried the Air 2S either, so I can't really compare both . Having the extra 3x camera definitely makes the Air 3 more versitile also.
I don't think the rc2 would allow you to fly smoother in any way. That's going to be more based on your settings and calibration of the joysticks and the drones flight. From my experience, doing those moves manually is just more about getting into the repetitive motion of how to do them. Muscle memory will take over from there. The RCN2 is still good to have around, especially if you wanted to connect it to a bigger screen.
The $168 price was for the original RC. That prices something I was able to find on eBay.
Now that the Mavic Mini 4 Pro is out and uses the RC2 I am hoping that eventually it will work with the Mavic 3.
Hoping right along with you. It just seems extremely awkward that they would only release two drones that work with this controller when they have many pre-existing out there.
Good info and video. One question, are those strap-screw-holes in corners same size of both RC and RC2?
Yup, they're the save size.
Incredibly well done review. Very detailed and precise….
Much appreciated
After watching your breakdown, it looks to me like the DJI mic receiver won't work plugged into the RC2. Was hoping it would so that in screen record, you could a voice.
Apologies for the confusion. It does indeed work. I've tried it and it works the same as on the previous model. The only differences is that there is no acknowledgement by the controller that it is connected.
Glad to hear that.Mine has just arrived and is being charged up at this moment. Looking forward to trying. Already have the Mini3pro and Air2 and Air2S@@WIHRC
@dave20thmay fun times. Enjoy it, it's definitely a very well put together and well-balanced product.
Thanks for the excellent comparison. The offline maps feature on RC2 (and I believe on RC and RC-Pro) apparently limits you to downloading map files sizes of 3MB which in my area amounts about a ~3mi X ~2mi map area (aka TINY area). And this means to get map coverage for a reasonable size area (which IMO is 25miles) you'd have select, download and re-name MANY map snippets in order to get this level of map coverage. And that makes the offline maps basically useless as far as I'm concerned.
I called DJI support and asked them what was behind this limitation and support claimed it was an Android limitation...not their limitation, hmmmm???? .....which as far as I can tell from my research is complete BS because AFAIK the limitation of file transfer under FAT32 in Android is 4GB (not 3MB).
Are you aware of any workaround to the 3MB map files size? Are you aware of any Android limitations that might limit the file transfer size to only 3MB or DJI just BS'ing us?
I saw this and wanted to wait until I had an answer. From what I can see, it's a bit of both DJI and the forced limitation of the version of Android they're using. I tried saving some maps on the RC2 (just got it again with the MIni 4 Pro), and the biggest portion I could save was up to 4.1mb.
I also tried doing this on my phone, and though the amount of data I was able to save was a bit higher, I could still only save a portion of a map and not something like a whole state. The limitation seems to be more on the Google side of things. I haven't tried to save any maps on my phone in a long time, but I'm using Android 13, which is the second to the latest update.
It all comes down to what seems like Google not updating the ability to save maps beyond a small area.
Hope this helps
@@WIHRC Thanks for the follow up. BTW, on Android 10 I was able to successfully download a Google offline map that was 190MB. Which was quite a large area (Entire San Diego Metro area). So given that is this really an Android limitation or a DJI limitation. Based on my testing it seems to be a DJI limitation.
The other thing I've noticed is that when I save a map snippet of a specific area and then open saved snippet it's point to a different map snippet then what I asked it to save. Have you see that problem. Also if you zoom in and out on the map occasion the map area will become so small that you can barely see it on the map at all. It seems to be a very buggy application IMHO.
No problem. After reading your latest comment, I'm starting to see where this could be more of a DJI limitation. It's seems like they might have limited this feature due to storage limitations on something like the RC. My guess would be that the quality and allowed save size of these maps might be tied to all 3 of DJI's controllers being limited to 1920 X 1080 displays. I wonder if the difference when doing this on an Android device like a Pixel or Samsung is the fact that the maps save based on the resolution, or maybe it could be dependent on the area and the amount of data needed to save that area with all of its details (thinking of how your map of San Diego came out to 190mb).
Also I haven't had the issue of my RC showing me a different portion other than what I had saved, but I did have an issue when doing a waypoint mission where the mission parameters I set with the C1 button were almost completely ignored. Wonder if that might be connected somehow to the portion of the map I saved.
.......yeah this is definitely starting to seem more and more like a DJI issue or rather a poor implementation on their part.
The RC2 will not RTMP greater than a 720p resolution. Does the RC have the 1080p option?
Missed this comment. From what I see, the RC doesn’t even have the option to use RTMP streaming at all. I check with the Mini 3 PRO and Mavic 3.
Hello I thank you for this video only one that explained RC2 battery. I just got a Mini 4 Pro and I was wandering real world battery life time for you? The battery lasts two flights or so doesn't seem normal. Again thank you for explaining.
Glad that the information in the video was helpful. That does honestly seem underwhelming. Realistically when I'm using the RC to the battery tends to drop about one to two notches but then again this could also have something to do with the temperature surrounding the controller. Either way I would definitely look into seeing if you can get a replacement if you're still within the return policy. It might be annoying to set everything up again but it's better to know that you have things working the way that they are supposed to.
Im curious if this new remote supports external mic as the earlier RC does. Although I never used it,lol
It does, indeed. I used the DJI mic just fine.
That was insanely thorough... thanks a lot for this 👍
Glad it was helpful
Great job!
What about the resolution of screen recording and Video cache? with the DJI RC it is miserable i.e. 854*480
I'm seeing 1280 X 720 for the screen recording based on one I pulled for an upcoming video. I honestly don't use the cache video, but I'd assume it's going to be the exact same. I'll take a look when I get a chance and let you know.
@@WIHRC Thanks, so it's better. Probably because the processor is stronger.
@jeanbouhnik looks like it. I just looked at another recording from my mini 3 pro, and the res is lower. Honestly, it's not something I ever took notice of before. Thanks for pointing this out. Would definitely be better if they would just take advantage of the full resolution of the display when it comes to screen recordings.
Now 960X540
Thanks!
@@borsel100
Great vid 👏👏I have a wireless mic which plugs into usb c under flap. Will it work with new DJI RC2 as I am looking at mini 4 pro. Thanks
It should. My DJI Mic works and is set up in a similar fashion.
Hi there, great video. How much faster is the response time? When switching lenses is there any lag at all? Thanks
There's about a 1 sec pause in comparison to the 3 or sometimes more pause I get with the RC. The speed of the RC is surely noticeable all around. Hope that helps.
Lenses?
Very very detailed review. Thank you so much for pointing out the differences and similarities! I am going to sell my Mini3Pro for the Mini4Pro Non Bundle. I get to keep the batteries and chargers and no need for that same damn bag which I have two sitting here since Air2
Much appreciated. I'm glad you enjoyed the video. This is exactly what I did. I bought the base version of the Mini 4 Pro with the RC2 and I'm currently selling my Mini 3 Pro. I'll have to check out the bag for the air to since I've been looking for something smaller.
What about RC2 vs RC Pro? Maybe there's a RC Pro 2 coming soon?
Unfortunately the RC Pros a little bit too much for my blood right now. I aim to get one in the future but just can't justify the cost right now unless I was able to find it below 800. Once I do acquire one I'll do a comparison between it. Also not necessarily sure if there will be an RC to but I don't see why there wouldn't be.
I don’t think think the DJI RC 2 will be backward compatible due to it using the new DJI 04 video transmission technology, the mini 3 pro uses DJI 03.
We will just have to wait and see what happens in a few months.
I can add voice via a radio mic. To screen recordings on my mini rc.
I dont think this is possible with rc2?
I can't say that all mics will work, but I've been using the DJI mic to add voice to the screen recordings taken on the RC 2, and it has worked fine.
Nice review!
Much appreciated
Super review and yes I darn well did learn a lot! Thank you for that.
Much appreciated James. I'm glad that the video was darn helpful LOL.
Many details! :)
Do you think RC pro would be compatible with air 3?
I have a good feeling that it will be. The RC Pro is ridiculously expensive and I think DJI knows that people would be extremely pissed off if they didn't add compatibility with the air 3.
I bought the RC and to be honest, i prefer the RC-N1. I dont like the screen below my controls and i don't like having to turn hot spot on and connect to it, i prefer the cord. I get better range and it seems like higher quality transmission with the RC1.
Excellent, excellent, excellent vid. Thankyou
Glad you found the information helpful.
I have the Mavic 3 Classic with the RCand now the Air 3 with the RC2, I hope they make the RC 2 compatible with the Mavic 3.
Same here. It would be such a waste not to make all of their current products compatible.
Informative indeed
Thanks for the very thorough video. I do have one question, have you ever had any problems with the screen going black or switching to the screen that prompts you to go fly while the drone is in flight?
I believe this happened to me twice but on a very rare occasion with the RC. It has happened once on the RC 2.
@@WIHRC Thanks for the quick response. Subscribed.
@1flyjcLIB1drone No problem and thanks. The sub is much appreciated.
a big thanks
Great video!!
Please let us know how to transfer files as you me mentioned you had a different way to do it than dji from the rc2 also I was struggling with the blue too to transfer , also someone mentioned that you have your phone on airplane mode to do quick transfers is this true ? As the lte signal causes issues , regards
I'm working on making this video pretty soon. I just have a lot of other videos to work on. I haven't seen any significant difference with putting the phone on airplane mode and keeping Bluetooth on, but that's definitely something that's possible. Also, Bluetooth transfer is something that may only work from the RC to an Android phone, being that apple ( to my knowledge) still doesn't allow direct Bluetooth transfers, especially from other operating systems.
Stay tuned to the channel for that transfer video.
Great Info ! Hoping the RC2 ... Will be backward compatible soon !
Much appreciated. I'm hoping so too. As long as it doesn't take months.
Hope it could recognize type c storage or any dongle
Ho is better ? Dji air3 or mavic3classec
That depends on what you're trying to do with the drone. Honestly, both are exceptional drones that have their flaws, but if it were me, I'd go for the Air 3 since you can buy it with the Fly more combo for a similar price as the Mavic 3 classic brand new. You'll also be getting two cameras and better battery life with the Air 3. Of course, the big advantage of the Mavic 3 Classic is that 4/3 sensor, which will give you the utmost detail in every situation, but that just means you'll have to do more work to get that detail out of the Air 3.
Thanks
I was about to buy sun shade for the RC2 and thanks to your video, in understand original RC has different shape so it won't fit.Btw if someone has suggestions regarding screen sun shade... Thank you
Glad that the video was helpful.
The DJI RC is not running the most recent software. This is why the audio voices sound different. DJI updated their fly app a while ago with different voice talents
Yup. I got the update a few weeks after this video, I believe. Also mentioned this in the pinned comment I made with Updates and Corrections.
Very informative great video 👍🏾
Much appreciated.
$189.99 if you look in the right place! Where is the right place? Thanks
You can find the DJI RC for prices such as $189.99 or lower on sites such as Ebay, or MPB.com.
Also how did you connect it to your computer when the cable is usbc , what adapter did you use to the computer
Also I tried the blue tooth today and it didn’t work it connects with my phone but keeps saying failed when I transport
Can you do a blue tooth video
Also please let know when you do the Video with the transfer of files to the phone from the rc2 not the drone I struggle with this
Took long to answer this cause i was creating the video that will answer all of these questions however to answer in written form:
No adapter. I have a dock the has both type C and Type A ports. All you need is the appropriate connection for your computer and a type c on the other end to connect to the controller.
What OS is your phone running on?
I have a video on how to transfer files coming out today at 2pm MDT that might answer this question.
@@WIHRC thank you
I am running 16.6
Thank for the update
@eitanfine5185 your welcome. Sorry I should have been more precise with that question. What device were you using to transfer over Bluetooth? Like Apple, Android or Windows?
@@WIHRC No problem, apple version 16.6
its all about range here
Must say the incompatibility between the RC and the mini 4 is what decided me not to buy a dji drone anymore… there are other brands out there…
I hear you. I'm just curious what brand will you switch to?
@@WIHRC at this point i would switch to Fimi, but not the mini
I think it's going to be pretty shitty if it's not backwards compatible. just because the mavic 3 pro and mini 3 pro deserve more respect
Still prefer using my S23 ultra phone brighter for a start, Nice info though thanks.
I don't like the way they got rid of the sd card cover,
The N2 seems to be a bargain, that is if you want to use a cell phone or mini ipad.
Waiting for usbc video out for my VR glasses. Easily implemented but dji won’t do it. Gotta buy those 500$ goggles lol
Wow! Great video. Had my air 3 for a couple weeks now and I am blown away by it. Yes I would love to see how you transfer stuff as I am struggling with. Just subscribed! Thank you
Thanks for watching, and I'm glad you enjoyed the video. The air three is definitely an amazing UAV to fly. I'm currently working on a few videos but file transfer is definitely one of them. I'm hoping to have that video out before Monday we're by Monday at the latest. I appreciate the sub and you should get a notification once I'm done with that video. Thanks again.
@WIH_R_C
Cool!! Thank you. U know your stuff...
@glennalan just finished filming that video. Should be out tomorrow or maybe even really late tonight. FYI: It's a little rough, but should give a decent amount of info.
Looks like they never added compatibility for the Mini 3 Pro 😢
Sadly no. I was rrskkt hoping they would've and thought they could
Very disappointed with the same 700nits brightness.
Definitely can't argue with this. I usually don't have an issue seeing it in bright sunlight but that's also because I'm adjusting the position of the controller without even thinking about it. I also refuse to get one of those hoods to put over the screen since I like to be aware of my surroundings at all times.
Seems crazy decision the RC2is not compatible with all the other mavic 3 drones
Agreed
What is also dramatic is the non-compatibility with goggles 2/Integra (O3), RC Pro, air unit,... . I own nearly all latest DJI products (Mini 3 Pro, Mavic 3 Cine, Avata, FPV, and even an Inspire 1 and a Mavic 3T). If not retrocompatibility from O4 to O3 protocol, forget me DJI to buy your latest products. No need of Air 3 and no need for new release of Mini 4 Pro coming in few months. Quite simple.
I have a good feeling that at least the stones you mentioned will be compatible at some point. The RC2 seems to have all that it would need to be backward compatible.
@@WIHRC Yes for sure, but what about DJI Marketing Dept?.
Believe me I hear you. From what I've seen they've been pretty responsive to user feedback and on top of that even though they pretty much have a monopoly on the Drone Market they wouldn't want to lose that so all we can do is keep our eyes open and our ears open even wider.
I get exactly where you're coming from since you own so many of their products. I don't know anything for sure but something just tells me that they wouldn't just alienate all of their fan base especially with the fact that drones like the mavic 3 and Mini 3 Pro are so new in a sense, but again we'll have to wait.
It did take the RC a while to be compatible with other drones like the mavic 3, air2s, Etc.
@@WIHRC Perhaps, but another example is also bad: DJI Mini 3 (not the pro) is O2, and can be used with RC-N1, RC... but not with RC Pro. This is inconsistant. DJI had plenty of time to make something for Mini 3 to work with RC Pro, but nothing up to now. But you can pilot Mni 3 Pro, Air 2S and of course Mavic 3 with RC Pro.
@SamcroHD fair enough. I honestly think the Mini 3 is more of a re-skinned mini 2 with some added features, and this is what I said in my review of the mini 3 and I believe I also stated the same in my comparison of the Mini 2 and Mini 3. It's not a bad drone, but if you stay on the surface and just look at the outside of it, then you miss what's going on on the inside. I appreciate you letting me know about the compatibility difference between the Mini 3 and RC Pro. I plan to buy an RC Pro when I can find one for a good price, and this will be something that I definitely mentioned whenever I do get one.
It'll be interesting to see what happens with the RC2 months from now, but I can understand if you're not holding your breath with it. I just hope that it does become compatible so that your money isn't wasted on the drones you have.
I darn sure did ! LOL
looks like RC1 screen is multi coating on it so i can see purple color coating but
RC2 is just plastic screen without coating. disappointed..
Now that you mention it, I completely forgot that I have a screen protector on this thing lol. That's what you're seeing probably.
when i look closely i saw the difference with actual screen and the corner so i noticed it must be screen protector ^^@@WIHRC
For my needs, that looks more like a downgrade.