Just changed two bulbs on the drivers side ,, found it a lot easier with taking the front tire completely off,, a lot more accessible to the wheel well splash bolts & clips. Great video and very helpful 👍
I used to have a 2015 Ford Escape SE. The easiest thing that I can changed the headlights in it. I would have a hard time in changing the fog lights on it. I don’t have that vehicle anymore. Now I drive a 2020 Ford Escape SE.
Pull the black piece of trim around the lens off. I used a flat head screwdriver to start. Just had to be careful to not mess up the paint. 2 phillips head screws on the left hand side of the lens. Remove the whole lens. Much easier to change the bulb this way.
I peeled.the trim off and there's mostly just body behind the trim, no real access to the bulb. is there any way you can make a video showing how you do it
@@helter-skelter2650 thx i'll try tomorrow. got pissed off at the situation so i got drunk and bout beat it with a hammer luckily my wife grabbed it lol
@ayemy 🤣🤣🤣 we have all been there. I did this on a friend's car so it's not here for me to take a video of. But I quickly decided there absolutely had to be an easier way than this video.
Great video. Be careful when handling the new bulb. I recommend wearing gloves so you don’t touch the bulb with your fingers. The natural oils from our hands can damage the bulb and cut down the life expectancy.
@marcosberto1 pull the black piece of trim around the lens off. 2 screws on the left hand side of the bulb. Remove the whole lens. Much easier to change the bulb this way as well
On this car? I think they’re a lot more simple, the only thing you need to remove is that rubber cap off and that’s it, even with big hands I was able to do it.
Just changed two bulbs on the drivers side ,, found it a lot easier with taking the front tire completely off,, a lot more accessible to the wheel well splash bolts & clips. Great video and very helpful 👍
Great video, super simple vs some of the other methods I looked into, thanks so much!
I used to have a 2015 Ford Escape SE. The easiest thing that I can changed the headlights in it. I would have a hard time in changing the fog lights on it. I don’t have that vehicle anymore. Now I drive a 2020 Ford Escape SE.
Thank you for the video it will help a lot
Thanks. So simple than other videos !
Pull the black piece of trim around the lens off. I used a flat head screwdriver to start. Just had to be careful to not mess up the paint. 2 phillips head screws on the left hand side of the lens. Remove the whole lens. Much easier to change the bulb this way.
I peeled.the trim off and there's mostly just body behind the trim, no real access to the bulb. is there any way you can make a video showing how you do it
@ayemy you have to remove the screw beside the light and the entire light assembly comes out.
@@helter-skelter2650 thx i'll try tomorrow. got pissed off at the situation so i got drunk and bout beat it with a hammer luckily my wife grabbed it lol
@ayemy 🤣🤣🤣 we have all been there. I did this on a friend's car so it's not here for me to take a video of. But I quickly decided there absolutely had to be an easier way than this video.
@@helter-skelter2650 well i appreciate the tip, i'll let u know how it goes
I WISH I seen your video 1st. broke my rear mount going through the front as shown on other videos,. will do the other side your way. thanks again
Ouch, sorry to hear that!
thank you, after watching countless videos yours was the only one that told me to turn the damn bulbs clockwise. Again Thank you very much
No problem!
Great video. Be careful when handling the new bulb. I recommend wearing gloves so you don’t touch the bulb with your fingers. The natural oils from our hands can damage the bulb and cut down the life expectancy.
Do you have a video on how to change the entire assembly, not just the lights?
I do not, but if I ever need to, I will make one!
It's the small yellow light I think it's call parking light
@@danielgerman9041 I'm also looking for this video
@marcosberto1 pull the black piece of trim around the lens off. 2 screws on the left hand side of the bulb. Remove the whole lens. Much easier to change the bulb this way as well
Can the turn signal be accessed the same way?
Thnx for video. Is problem if put a led lamp on it?
No problem! If they are decent quality LEDs, I don't see why they shouldn't work.
Thanks. Much simpler than others make it.
THANK YOU very much!
No problem!
Thank You
Perfect I wish the headlights were that simple
On this car? I think they’re a lot more simple, the only thing you need to remove is that rubber cap off and that’s it, even with big hands I was able to do it.
Ford escape engineers are screwed up