i got the Tornado V2M recently, and it immediately became my favourite 3x3, i dont really do speed solves so my experience is likely different to everyone elses, but the versatility of all the settings is fantastic
Reading "Chingrish" on packaging is always fun, I wish they tried to use English. Not that it would increase our understanding of their product, just because it would give us something to laugh at.
@@gcubing_4064 even I first thought that it is not possible but I saw a review of it from kardtrickkid, in the end of that video the timer was connected to the cstimer
The tornado v2 is my main, and the settings I use are magnet setting 2nd strongest, in the core: 4 on the outside and 3 on the inside Anyone who has a tornado v2, try these settings, I wanna see what everyone else thinks 👍
@@MasterPriyanshu hi, sorry to ask that but does your cube make some springs or magnets noises after changing the settings? Mine does and that kinda remove the "quietness" of the cube... One side make spring noise when turning it, and one side make a sound when the layer get align with the others and I really don't know how to remove those sounds... I would love to try different settings without having any problems like this, so If you have any idea, please let me know!
@@pixy3266 The Tornado V2 has a problem where the magnets make sounds but if u reduce the magnet strength, the sound also reduces, if u really don't want the sound then I recommend lowering your magnet settings, if u r comfortable with lower magnet strength
@@rexthecuber7203 thank you for the help! It was really annoying for me, and after testing a bit I came to the same conclusion, the sounds appear only when the layer align, so when the magnet are aligned... I agree that changing the magnet strength reduce the noise sometimes, and that's the solution thank you :) Also I think (that's my opinion) that magnet noise are due to the magnet moving a little of his position when he get dragged by an other one, like he's not completely still and can move a little bit I have sometimes spring noise, but they occur the same way, so I'm pretty sure there is a spring between 2 magnets on an edge, the spring to adjust the tention dosn't seem to have that problem Sorry for that long message, but this is just my findings and thoughts!
I think the 13x13 with only take about 30-35 min yes, it kinda turns easier than the 10x10, and even though it's bigger, 5-10 min is a lot of time :) trust you j perm :)
Hey, JPerm. I’ve heard a lot of beaf about the Tornado V2’s corner cutting issues. A lot of cubers have that out of the box and I’ve heard that a day later, the corner cutting seems to be all fine. I personally don’t have this cube myself, but I feel like your turning style feels more comfortable after a few break ins with the cube.
My friend, who is a legit non-cuber, got the X-Man Tornado cube, and boy, did he show off. Due to his show off, many people scrambled it out of curiosity and later he would come to me and plead me to solve it. It was a hilarious experience. P.S. I'm a cuber 😀
I’d probably say 43 minutes. Once you hit edge pairing, I don’t think it will have a significant time increase over other big ones. It’s mostly just a lot of time for centers!
I have the tornado v2 and out of the box it was really tight then I switched the axis distance to no.2 and the tension on no.3 and the magnet setting on the second strongest setting and It became more controllable and smooth I think you(Dylan) should also try these setting
I've done the initial algorithm selection and fingertrick practice with all the cases. I KNOW all the algs, I just can't recall which one to apply on which case right now lol. Hopefully soon though, fingers crossed.
I love my tornado v2, and the corner cutting isn’t great but if you have the cubers home edition then you can loosen it a bit to help with the corner cutting while the magnet keep it stable
jperm you are a real big influence to me i want to start cubing that was you that encourge me to make my self push my limits on the cube so please read this comment
had the same issue w the G4 Timer skin with the gaps and misalignment. i stickered the main piece flushed onto the edge and then i used the leftover trim to fill in the sideeitht eh big gap.
![My Rubik's Cube Collection! [200+ Cubes]](http://i.ytimg.com/vi/MyDnyfS7c1g/mqdefault.jpg)
15:55 59:43.28 I guess
So close!
@@JPerm I quit cubing for awhile, should I go back?
@@IdkAnymoreXD00 go study i say
hi cfs
How lol
the little sigh before the, "I hope you can read Chinese" joke LOL
minecraft youtuber spotted!
@cheetahh Cheeto what's ur ao5???
heyo
Wait what? Cheetah?
why is cheetahh here
Only reason I clicked was to hear a ‘Hope you can read chinese’ and JPerm didn’t disappoint me
For real 😂😂😂
2:13
HoPe YoU CaN ReAd ChInEsE😂😂😂😂
2:13 2:26
🧢
2:13 im sure everyone here is done with this joke but hopes it never stops
i got the Tornado V2M recently, and it immediately became my favourite 3x3, i dont really do speed solves so my experience is likely different to everyone elses, but the versatility of all the settings is fantastic
Jperm: “I’m not gonna count it’s definitely 13”
Me: proceeds to count pieces on cube
Yeah that was me lol
Same lol
yeah me to lol
“Hope you can read Chinese”
People who can read Chinese: YOU UNDERESTIMATE MY POWER
Guess you mean me
Don't try it
@@gh0st2c0ast **jumps** “AAARRGHHHH”
@@mkmkell. *slices*
@@gh0st2c0ast Aahh…. AAAHHH Aah aaahhhhhhrg aaarghh
"Huh, hope you can read Chinese" Jperm himself is tired of it, but we arent
why wouldn't we
I was just gonna comment this lol... so true
I am
I wish i could meet jperm irl
@@eugeniataraburca9243 r u hoping he will just GIVE you a gan cos he won't
Ah yes, the “Hope you can read Chinese” saga continues.
Reading "Chingrish" on packaging is always fun, I wish they tried to use English. Not that it would increase our understanding of their product, just because it would give us something to laugh at.
Yes
I'm Chinese i can say englisg
I speak cantonese
Hope you can read English
The xman's tensioning system, in my opinion, is beautifully simple and well executed
“If it was a gamer skin it would be covered in G-fuel and Doritos”
-Jperm 😂
Jperm: "OK I must handle this one with care"
Also Jperm: drops everything else
@ShadowPheonix hello Mr Agoti
I love going on SCS's "new" section, just to preview what jperms next vid will be
I actually never thought of that... that's amazing
Say the line Bart:
“Hope you can read Chinese”
YAAAAY!!!
WAAAAAAAAAAA
Who is bart and is he hurt ?
HURRAHHHHHH
You can use cstimer Bluetooth timer feature for connecting it to your cstimer
I thought it conects only to a cube?
@@gcubing_4064 even I first thought that it is not possible but I saw a review of it from kardtrickkid, in the end of that video the timer was connected to the cstimer
The smart timer should have a penalty system (DNF, +2, etc.) in my opinion. This would make it far superior over the regular stack mat timers
The tool actually looks cool. Might have to get one just for that.
the 2-thing lol
@@countryballsanimationsandm5362 no the beetle tool
Meilong and Yuxin both want to have J perm's biggest cube theirs
*shengshou cries in the corner*
@@43Cubes yas
hey you have the same profile as me
But yuxin is the biggest not the number but the piece 😂
@@syahmisyairazybinshuhaimi3075 yes, I don't think I can physically hold Yuxin 10x10, meilong is friendlier in this sense
The checkerboard pattern so pretty
The tornado v2 is my main, and the settings I use are magnet setting 2nd strongest, in the core: 4 on the outside and 3 on the inside
Anyone who has a tornado v2, try these settings, I wanna see what everyone else thinks 👍
I have the Tornado v2 and I recommend the settings:
Center travel distance:2
Spring compression:3
Magnet strength:2
My settings-
Centre travel distance- 5
Spring elasticity- 5
Magnets- 5
Lube- Weight 5
@@MasterPriyanshu hi, sorry to ask that but does your cube make some springs or magnets noises after changing the settings?
Mine does and that kinda remove the "quietness" of the cube...
One side make spring noise when turning it, and one side make a sound when the layer get align with the others and I really don't know how to remove those sounds...
I would love to try different settings without having any problems like this, so If you have any idea, please let me know!
good but mine is
ctd:2
springs:5
magnets:4
@@pixy3266 The Tornado V2 has a problem where the magnets make sounds but if u reduce the magnet strength, the sound also reduces, if u really don't want the sound then I recommend lowering your magnet settings, if u r comfortable with lower magnet strength
@@rexthecuber7203 thank you for the help! It was really annoying for me, and after testing a bit I came to the same conclusion, the sounds appear only when the layer align, so when the magnet are aligned...
I agree that changing the magnet strength reduce the noise sometimes, and that's the solution thank you :)
Also I think (that's my opinion) that magnet noise are due to the magnet moving a little of his position when he get dragged by an other one, like he's not completely still and can move a little bit
I have sometimes spring noise, but they occur the same way, so I'm pretty sure there is a spring between 2 magnets on an edge, the spring to adjust the tention dosn't seem to have that problem
Sorry for that long message, but this is just my findings and thoughts!
Nobody:
JPerm: I need to handle this with care.
Also JPerm: Drops everything else.
*fun fact:* when you write 'fun fact' in your comments, people read it more carefully.
Tru
Yup
Exactly
Facts.
Fun fact: facts
Oh omg 🌹🌹🌹🌹. Jperm🤷♂️
When there is a quiet cube or a loud cube on a unboxing vid, he always brings out the tenyun
I actually predicted he would say "I hope you can read Chinese" this time!
Same
Me too.
J Perm : "Hope you can read chinese"
me : *"haha, he said it"*
The oldest anarchy server in minecraft....
“*sigh* hope you can read chinese” never get old
@Arfin Zohab just steal my comment lol, i actually dont care
@Arfin Zohab Legend
Lol your name and profile
@Arfin Zohab poggers
the x man tornado is actually my main i do 5-7 seconds but i dont go to comps
Dylan: "Hope you can read Chinese."
Me, who can't read Chinese: "Impossible"
@@saeedbutt1955 yeah. Maybe you never bothered with the name thing.
@@saeedbutt1955 do u live under rock or something?
"hope you can read Chinese"
Never gets old
The fact that j perm is increasing 1k subs per day !
Yah I've been tracking that too!!
ok
He deserves it tho lol
Nobody:
*jperm: uploads 2 unboxings in a row*
Me: *EXCITED NOISES*
00:41
Jperm: this cube is super quiet
Meanwhile the cube: Aaaaaaaaaaaaaaaaaaaaaaaaa
Hi big fan of you J perm. You said that you would unbox an xman flare 2x2. When would you give your reviews on that???
Just find his video on that.
He has not uploaded that video
@@OfficialCuberDude27 I cannot give a link but he uploaded that video. Update: it's the cow video.
I think the 13x13 with only take about 30-35 min
yes, it kinda turns easier than the 10x10, and even though it's bigger, 5-10 min is a lot of time :)
trust you j perm :)
Hey, JPerm. I’ve heard a lot of beaf about the Tornado V2’s corner cutting issues. A lot of cubers have that out of the box and I’ve heard that a day later, the corner cutting seems to be all fine. I personally don’t have this cube myself, but I feel like your turning style feels more comfortable after a few break ins with the cube.
beaf?
Logan a vegetarian?
@@Axsell no I’m not, I thought it was funny that he said “beaf” not “beef”
The xman tornado is really good weh you apply some weight 5 or smthg like that which makes it more controllable. It’s epic!
Yes Jperm skin! I'd pay good money for that
Can you make an updated speedcube tier list pleaseeee....🙏🙏🙏
I want my cube to be a bit loud. As when doing algos you flex even more as people can not see your hand moving but can hear the noice lol.
Wow
Noise lol
When you can actually read Chinese:
*God level achieved*
I see no god up here other than ME
I can read Chinese
God Mode activated
Witherwings 777 active in r/cubers server when (I'm rouxfop)
@Joseph Zhu same
You should try the superflip pattern on the 13x13, it looks insanely good on big cubes!
17:33 love the time of day
Good job luck you you're good don't stop being creative
The whole Cubing Community was waiting for this video
For real
My friend, who is a legit non-cuber, got the X-Man Tornado cube, and boy, did he show off. Due to his show off, many people scrambled it out of curiosity and later he would come to me and plead me to solve it. It was a hilarious experience.
P.S. I'm a cuber 😀
My friend bought a gan and shows it off too but few days later he is pleading for help
I’d probably say 43 minutes. Once you hit edge pairing, I don’t think it will have a significant time increase over other big ones. It’s mostly just a lot of time for centers!
IMO they definatly improved the corner cuttig, the adjustment, and more with the v33, my min cube
Congratulations on 1 million subscribers 👏
Finally what I've always wanted, a flat 13x13 cube!
14:56 it looks like he is really struggling to move the layers
Jperm today: Unboxing a 13x13!
Jperm next week: 13x13 advanced method tutorial
Jperm in 2 weeks: How to be sub 1 on 13x13
Thank you so much for the unboxing of X-Man Tornado V2 M.
The factory setting all 3 is tight ，all 2 is the best！
Let's be honest we all came for 13x13!!
No I came for the Timer
I came for the skin unboxing
No I came for tornado v2
Me using translator to read the Chinese
Chinese people: look what they need to mimic a fraction of our power
Don't worry, J Perm will fill the gap soon.
S
P
E
M
@@cuberdoge22 spem?
That adjustment mechanism looks nice
YYYYEEEEEEEEESSSSSSSSSS FINNALLLLLLLLYYYYYYYYYYYYYYY Xman tornado
I have the tornado v2 and out of the box it was really tight then I switched the axis distance to no.2 and the tension on no.3 and the magnet setting on the second strongest setting and It became more controllable and smooth I think you(Dylan) should also try these setting
Axis distance should be 3 and spring compression should be at 2
Any indians here
my guy has been waiting for 4 years
@@v3xty775lol
I finally finished learning full oll!
just kidding i know about 5 😂
I've done the initial algorithm selection and fingertrick practice with all the cases. I KNOW all the algs, I just can't recall which one to apply on which case right now lol.
Hopefully soon though, fingers crossed.
@@vpsjdon keep going! try practicing with the algs trainer on jperm.net :)
Jperm: this 13x13 turns really well
Gan: Guys we can't let moyu win... We must make big cubes!!!!
Plz make a tutorial for pyramix l4e
When are you going to teach us Chinese
Jperm: "hope you can read chinese"
can we get an F for the people who are new to the channel and thought he was serious for a second?
Describe j perm
Me: "I hope you can read chinese"
JPERM: THE new YJ MGC 13 x 13 the meilong 13 x 13 was just holding me
back
I love my tornado v2, and the corner cutting isn’t great but if you have the cubers home edition then you can loosen it a bit to help with the corner cutting while the magnet keep it stable
“Listen!” says Jesus. “I am coming soon! Happy are those who obey the prophetic words in this book!”
Revelation 22:7 GNBUK
💛
jperm you are a real big influence to me i want to start cubing that was you that encourge me to make my self push my limits on the cube so please read this comment
Hey Dylan, I was wondering if you know how y perm and t perm are connected. If you don’t, I can tell you if you want.
hey jperm, could you solve a cube as fast as you can using the beginner method? i would like to see that!
1:14 test the sound quality with the rubiks brand cube for fun
Approximately an hour solve !😅 Great video !
I say 40 minutes for the 13x13! And I'm so excited for your full tornado review
is it just me or is my dream like a 35 Millimetre version of the x man tornado exactly the same but snaller
should I get the x-man tornado v2 with core magnets or without. I’m kind of on a budget so I’m kind of leaning towards the non core magnets
Full review on the tornadoooo! Can it be stable and have good corner cutting?
My guess is 1:12:62s If I'm right I will be happy, Can't wait to watch the long video! Have a nice day! Bye!
"I think timer skins are the future of making your timer look different"
- J perm
The beetle tool can also be used on the Moyu adjustment system
Asmr for sure
hi J perm, I WANTED TO KNOW WHAT IS YOUR 3 BY 3 MAIN CUBE RIGHT NOW?
just recently there was an update to CStimer, so you can connect the GANtimer.
I just ordered x man tornado v2 yesterday
Buy the ch version of tornado v2 x man
Finally the tornado v2
i got this cube 2 weeks ago and i loovveddddd itttt!!! it was really tight out of the box. but i made springs looser and it feels awesome!
I am from Bangladesh . I love your videos.
love your videos wish you the best
had the same issue w the G4 Timer skin with the gaps and misalignment.
i stickered the main piece flushed onto the edge and then i used the leftover trim to fill in the sideeitht eh big gap.
Lol Jperm got music in the background! 😂😂
17:40 bro rly recorded at 4 20
im getting the cube
Does the timer have a anti-skid property?
34:43, that’s my best guess.
okay so at 5:16, what cubes are there where BOTH sides change?
I got the tornado video while ago I’ve been waiting for him to review it