I make a seal out of plastic wrap layered 5x sit on top of jug screw top onto jug, trim excess and it reseals after each opening....if that makes sense
Good shit man. Great video. Love the triggercam footage. Cool to see Will make a cameo appearance! I shoot with him at local matches in SoCal from time to time. He has given me a lot of great advice over the years. Have always enjoyed your content. Keep up the good work! Tight groups
I used to use tape like you... Now i just use an orange paint pen. Excellent video. As before, great shooting in our squad... Obviously your preparation paid off. 😉 🏆
Great shooting. That triggercam shows nice crisp image of reticle plus target and field of view compared to other videos I’ve seen. Is it just because you focused it better than others (I don’t own one, never used one and wouldn’t know). Or is it because of the scope? Or combination of both? Or just nice soft light during the session? Either way most other videos using triggercam look blurry.
I suspect you are heavily sponsored by now, so.. how do those fancy automated scales work compared to say a chargemaster with a few upgrades? Which annealing machine do you like? Process for cleaning brass? I see the forster you have, like it? I have been thinking about buying one. The 750 dillon and rock chucker work ok. The debate was to upgrade the dillon entirely and use chargemaster to measure.. or get a forster. Share some insights on your firing schedules. Live versus dry. Average consumption rates per month of training and per match. I am interested in PRS. Looking at the CDG and a samson stock. Thanks brother! P.s. nice tooth. HoG.
Maybe he will answer it but I'll give a few points. The difference between the A&D scales and the Chargemaster is the strain gauge on the latter. They can drift and are not entirely accurate at times. Additionally, running an Autotrickler or Ingenuity Precision system, you get the benefits of speed AND accuracy with throwing powder. You have a 750, you are already ahead of the game. I personally load all my PRS ammo on an automated Dillon with dual A&D/Ingenuity Precision setups and can do 300 rounds in 30 minutes, easily. My only limitations is casefeeder and bullet feeder capacity (to refill). For annealing, the AMP with AMPMate is great. Don't overthink it. Go to a local match and you will have a ton of fun. The rest will come with time.
@@NiteQwill_ appreciated. This game basically comes with a $50,000 price tag... It seems like the v4 autotrickle on the fx120 outmodes that ingenuity precision thing you mentioned. AMP looks nice.. $2000+ into an annealing machine is a tough pill.
The ATV4 is trash compared to the Ingenuity Precision. I know, I was a beta tester for the ATV4. Plus, I owned the v2 and several V3s, as well. The atv4 is notorious for overthrows.
@@NiteQwill_ I must be confused and will research more later. At the initial glance. I was to understand that the at4 was not compatible with that other trickler. That the at4 was supposed to do everything itself. Hence why it was produced over v3? So you are saying v3 autotrickler with that additional trickler is needed??
You can use the ATV4 with the Ingenuity System, it works. In fact, an extension cable for the ATV4 is sold by Ingenuity for that purpose. The downside is that it is not as fast. The ATV3 is discontinued, so unless you find one used,l (usually at a premium because people want to match them with the Ingenuity system), they're hard to come by. To sum up: ATV3 + IP : fastest ATV4 + IP : Works and is quick Full system IP : not currently available but fast like the ATV3/IP setup ATV4 and Supertrickler : prone to overthrows and much slower
Phil, I notice you engage with one eye close. Can you discuss this in detail. I've heard you should try to train engaging with both eyes open. Your thoughts, thank in advance.
I've always enjoyed your excellent shooting content, but your photography is probably impressing me even more. Keep up the great work.
This is great! Thank you for sharing your knowledge and experience with us.
Would love to see more of this style of content. Behind the scenes - what does it take before and also after the match. Nice quality
Very informative. More please.
Just wanted to say thank you for making these videos.
In the opening B-Roll (Did i use that term correctly?) Who makes the press adapter for the orange vise?
Good to see I'm not the only one that writes the "opened on" date on powder jugs.
I make a seal out of plastic wrap layered 5x sit on top of jug screw top onto jug, trim excess and it reseals after each opening....if that makes sense
Learned something here once I get to actual reloading.
So far I been acquiring my equipment and doing some brass prep.
Great video, keep them coming.
Enjoyed and learned a few things from you again. Thanks for sharing.
Please do a walk through of your gun and reloading rooms. Love your set ups
Great real life video going to two day matches! Airbnb only way to go. No more hauling gear through hotel lobbies. Keep up the content😊
Good shit man. Great video. Love the triggercam footage.
Cool to see Will make a cameo appearance! I shoot with him at local matches in SoCal from time to time. He has given me a lot of great advice over the years.
Have always enjoyed your content. Keep up the good work! Tight groups
This was a dope vlog. I hope you continue on to the match and such.
Would love to see how you tune mats, if you need to, for each cartridge
Great content!
Great Vlog 🔥
Airbnb is for sure the way. I swear I pack and repack three times for the next Moran’s still feel like I’m gonna leave something.
I used to use tape like you... Now i just use an orange paint pen.
Excellent video. As before, great shooting in our squad... Obviously your preparation paid off. 😉 🏆
Awesome stuff bro keep your face on the gun
Great shooting. That triggercam shows nice crisp image of reticle plus target and field of view compared to other videos I’ve seen. Is it just because you focused it better than others (I don’t own one, never used one and wouldn’t know). Or is it because of the scope? Or combination of both? Or just nice soft light during the session? Either way most other videos using triggercam look blurry.
I like it! You might include a bit about cleaning your rifle before and during a match.
What is the mount system the orange vise and press are on?
I would like to know as well.
Imelda Marcos would be jealous of all them shoes in that garage.
Really enjoy your content.
Was there a change in your dope at 900+ yards?
What is causing the change in powder consistency when you leave it in the hopper?
Humidity
Why does the powder act differently in a hopper vs. the original cannister?
Bring back the classic Phil-ism #KYFOTG
Covertnoob5 is a cool/informative guy I'm glad you're doing some stuff with him.
A lot goes into shooting good, same as any other sport
Legit
Are you using AB on the Garmin?
@@burkmanfox Yes.
I suspect you are heavily sponsored by now, so.. how do those fancy automated scales work compared to say a chargemaster with a few upgrades? Which annealing machine do you like? Process for cleaning brass?
I see the forster you have, like it? I have been thinking about buying one. The 750 dillon and rock chucker work ok. The debate was to upgrade the dillon entirely and use chargemaster to measure.. or get a forster.
Share some insights on your firing schedules. Live versus dry. Average consumption rates per month of training and per match.
I am interested in PRS. Looking at the CDG and a samson stock.
Thanks brother!
P.s. nice tooth. HoG.
Maybe he will answer it but I'll give a few points.
The difference between the A&D scales and the Chargemaster is the strain gauge on the latter. They can drift and are not entirely accurate at times. Additionally, running an Autotrickler or Ingenuity Precision system, you get the benefits of speed AND accuracy with throwing powder.
You have a 750, you are already ahead of the game. I personally load all my PRS ammo on an automated Dillon with dual A&D/Ingenuity Precision setups and can do 300 rounds in 30 minutes, easily. My only limitations is casefeeder and bullet feeder capacity (to refill).
For annealing, the AMP with AMPMate is great.
Don't overthink it. Go to a local match and you will have a ton of fun. The rest will come with time.
@@NiteQwill_ appreciated. This game basically comes with a $50,000 price tag... It seems like the v4 autotrickle on the fx120 outmodes that ingenuity precision thing you mentioned. AMP looks nice.. $2000+ into an annealing machine is a tough pill.
The ATV4 is trash compared to the Ingenuity Precision. I know, I was a beta tester for the ATV4. Plus, I owned the v2 and several V3s, as well. The atv4 is notorious for overthrows.
@@NiteQwill_ I must be confused and will research more later. At the initial glance. I was to understand that the at4 was not compatible with that other trickler. That the at4 was supposed to do everything itself. Hence why it was produced over v3?
So you are saying v3 autotrickler with that additional trickler is needed??
You can use the ATV4 with the Ingenuity System, it works. In fact, an extension cable for the ATV4 is sold by Ingenuity for that purpose. The downside is that it is not as fast. The ATV3 is discontinued, so unless you find one used,l (usually at a premium because people want to match them with the Ingenuity system), they're hard to come by.
To sum up:
ATV3 + IP : fastest
ATV4 + IP : Works and is quick
Full system IP : not currently available but fast like the ATV3/IP setup
ATV4 and Supertrickler : prone to overthrows and much slower
Phil, I notice you engage with one eye close. Can you discuss this in detail. I've heard you should try to train engaging with both eyes open. Your thoughts, thank in advance.
👀