How easy is it to setup INAV 4.0? Different from INAV 3.0?
HTML-код
- Опубликовано: 8 сен 2024
- INAV 3.0 series
Thank you for taking the time to watch the video. You can find me on social media at / painless360
/ painless360
www.thingivers...
R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job but if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!
If this video helped you and you want to support the channel you can use these links:
/ painless360
paypal.me/pain....
Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#INAV #setup #fixedwing
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
I have had better luck with Ardupilot than iNav. Learned it here with your ARWing build! Thanks!
Hi Lee Great video on INAV 4.0 , I can't wait to try 4.0 on my AR Wing pro. Thanks again for the updated video.
I have an FPV proposal. There is nothing more cool than landing FPV. It heightens the experience because things are happening, and the ground is coming up, and it is total immersive experience. Here is the proposal: FPV landing with PAPI lights that shoots the landing decent approach. PAPI lights would give you the proper glide descent angle. I have not yet seen any youtubers make a PAPI light FPV landing approach video. I just think that would be so neat.
=====
I personally have not flown rc in 20 years, but I am looking at the turbo timber with its flaps and slats and I want to do FPV touch and go.By the way, PAPI lights are not hard to make. It doesn’t even have to be a ‘light’ It can just be visible white and red paint that is half covered (ie the red is covered up at a certain visual angle and the white at another angle). PAPI lights.
=====
So, what do you think? Would you ever consider a PAPI light landing FPV video? Thx.
Thanks for the idea but I am not sure how I'd make small portable lights that would be bright enough and large enough to be seen. Thanks for the idea though... Happy flying
Fantastic, Lee! Thanks a lot! 😃
iNav seems to be getting better and better! And it's not that complicated either.
Anyway, stay safe there with your family! 🖖😊
This guy need more subs. And likes
thenks.bravo
U are very good man love from israel
I will upgrade my 5" Quad from 3.0 to 4.0
Yes INAV became good, stable to fly with.
Thank you Sir.
I went to 4.1. And flies better.. though I have to goto 4.0. 4.1 is RC and my waypoint not working. Painless360 said go back to 4.0 and see
@@divingfalconfpv4602 great, thank you for the information
happy flying!
I changed back to INAV 3.0.2 after 4.0 continually gave me the message "Pitch/Roll not centered" and would not arm. I tried all sorts of remedies; centered throws to 1500, etc.. 3.0.2 is successful as it is less sensitive to this parameter.
What else did you try to? I've not seen that on any of the 4.0 builds here...
@@Painless360 ensured the sticks and trims were calibrated and centered on the TX16s radio, outputs in INAV set to 1500. Don't know what else to do in 4.0 but I don't have that issue with IVAV 3.0.2, and has everything I want. Thank you from east Tennessee, always love your videos.
Channel order?
@@Painless360 Channel order? On the AR Wing Pro-- 1. Throttle, 2. Aileron, 3. Elevator, 4. Rudder, 5. Arm, 6. Mode1 (Horizon, Manual, Aero), 7. Mode2 (Aero, PosHold, RTH), 8. Autotune. Looking at another one of your tutorials, I noticed you reduced the ends to +/- 98% on the TX16s. I'll try that next, but would not think it differs between the revisions. Thanks!
Thanks for responding, Lee. You're awesome! Since 3.0.2 works for me quite well, for now I'll stick with it. Maybe I'll try again in a few months, but then the newest will be 5.0. I always look forward to your great and very helpful videos!
Hi Lee. Hope all is well there. Your inav series is awesome. (as well as all you other series). I have never flown with it and have been using a Kopilot so far. Now I have a Matek F411 wse and have started to configure it out of the plane. It had 2.6 and I have flashed it to 3.0.2. Now that I found this video I am looking at flashing to 4.? When I look at supported boards the 411 is not listed but on 4.0.0 RC1 it is. Will 4.0.0 work or use the rc1? Thanks in advance. Jeff
It is supported on all versions. Check out my INAV for beginners 2020 series... Best of luck
THXS...Lee FOR ALL! I have the 2020 version, 2.1.6 and I think they just released 4.1 if I'm not sure... My question is if I should update my old version to the latest because I'm afraid that my parameters will be misconfigured and start again, to learn that it has been an odyssey for me. I have a wing AR 900 with Matek F405 with nice flights. Thanks again.
Maybe this unreleased video will help - ruclips.net/video/Jle2nu4JbdU/видео.html
How do you set or change the PID loop or flight loop time frequency / value?
By default the loop time is set to 500 and the range is between 0-9000.
In that case, if I want to set my PID loop frequency to be 4KHz what am I supposed to do?
High looptimes while using slow devices like GPS on stuff like F4 based flight controllers is tricky. Sounds like you are coming from Betaflight. I don't worry about that on quads. My advice would be to look at INAV as something completely different. From INAV 3.0 release notes: "Gyro is always processed as fast as possible without jitter and PID loop follows. In general, looptime configuration is no longer required" Best of luck
hey lee i have a question got inav 4.0 setup. im using elrs and f405wse board got everything setup checked reciver its working fine but i plug in and nothing works even though its showing in the reciever tab. what could i have missed any info would help thanks and keep up the awsome job
Enabled outputs? See my INAV 3.0/4.0 setup videos.. best of luck
If this one is specific for wings, will there be another video specifically for iNav 4.0 for quads?
About to start building my first inav quad here!
ruclips.net/video/1zkzrwHKEKg/видео.html
Great channel!! In inav 4.1, I can't find auto level in modes page. Am I missing something. Thanks in advance.
Auto level is fixed wing only.. Happy flying
@@Painless360 thanks for quick reply, just found out you need a baro for autolevel( don't have one one this fc :( ) Been watching your videos since the APM 2.6 days!...Keep up the great work!!!!
start with arduplane or Inav first? I have dabbled in arduplane but mission planner ui is just kind of slow to use and double check you have everything configured right. Inav seems like you can zip around the menus easier. Stick with it? or try out inav?
It depends on what you want and what you already know as INAV will feel similar to Betaflight users. ruclips.net/video/ZwCLdkjqM-Y/видео.html covers the differences and when I use each software..
I have a question? Is normal that when active arm sw the mode angle active same time
Everyone has their own way of setting up modes. I like the arming and mode switches on different channels and switches... Happy flying
Have you had a problem with the matek GPS not working on new inav? Mine doesn't register. The module lights up red and flashes blue. Compass on it works. But the GPS isn't working
Have you tried swapping the rx/tx wires? What troubleshooting have you tried?
@@Painless360 well I haven't tried swapping the rx tx because I soldered them on and has worked previously. My troubleshooting was changing baut.. changing from ublox to test the others to no avail. The NMEA selection blue light my GPS indicator in configurator but no sats listed and it kept timing out, turning red and then back blue in configurator. I even tried the new candidate 3 because I heard it fixed someone's problem, but mine persists. I meddled around with some cli GPS commands(turning on and off random things) I found with -get GPS. But nothing seems to work. I heard in the discord someone say it's enabled through cli commands only in the new inav. But Idk man I can't find it I guess. Or perhaps he was mistaken. 🤷♂️
First thing to check is the TX and RX connections are the right way round. See my builds. Best of luck!
I’m coming back to RC after a long hiatus. I’m seeing a lot of different radios out now. When I left, JR and Futuba were the main players with Spektrum coming on strong. What are the best transmitters out there now?
Sounds like you left as I started to get into the hobby. Those proprietary radios are still about and many pilots love and use them. Lots of pilots now use the cheaper Opentx/EdgeTX powered radios from newer vendors like RadioMaster, Jumper and Frsky but the quality is no where near those older brands (but they also cost a fraction too). One of the few new radios that is almost as good in terms of quality is the Frsky X20. Check out my Kit Picks 2020 video for my choices. Best of luck
@@Painless360 I’d like to set up a radio system with flight stabilization and return to home. I’ve gotten spoiled to those with my drone. Ultimately, I’d like to get to the point of having OSD and FPV without tossing too much equipment to the wayside. Any suggestions?
@@Painless360 I’m watching your review of the TX12. Would that work with my current receivers? Can it support an external display for fpv & osd?
INAV or a Kopilot are the two options I'd suggest you look at for RTH modes. If you want all that OSD goodness then INAV is the way to go. See my INAV for Beginners 2020 series for all the steps..
The TX12 only works with a limited set of receivers that you can find listed on the pages of resellers. They work with Texas Instruments CC2500: Corona, Hitec, Futaba S-FHSS, Frsky D16/D8, RadioLink, Graupner HoTT so if your existing receivers are one of those, it should work.
@@Painless360 I’ll check that out. Any suggestions for video downlink? Thanks again.
I’m coming back at this from KK2 and CC3D - no need for PID tuning? Are the stock settings good for fixed wing?
Tuning things like rates to get it feeling perfect for you can be useful but modern code is very good at giving you a model that flies well straight away now. See my builds on the channel...