How To Install Smog Block Off Kit on 2023+ Kawasaki ZX-4RR by TST Industries
HTML-код
- Опубликовано: 25 июл 2024
- Purchase your ZX-4RR Smog Block Off Kit here!: bit.ly/3srvh5K
Cover the hole left behind from removing your ZX-4RR air induction system (AIS) with a clean and elegant solution. Our WORX racing program has been working hard on products that help you squeeze the most power out of your R3, Ninja 400, R7, R6, and now the ZX-4RR! A key component to that mission has been the development of the TST WORX Smog Block Off Kit. This kit enables you to achieve a proper air:fuel ratio while tuning your bike while keeping exhaust pops to a minimum during intense racing conditions.
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
00:00 - Product Overview
04:12 - Removal of OEM Plates
09:47 - Installation of Block Off Plates
12:08 - Throttle Body Hose Delete
16:02 - Evap System Removal
21:24 - Outro Авто/Мото
Another great video 🤜🏽🤛🏽
Thank you again
Is there a how to video on the 2024 zx6r
What happens if you take out the EVAP system with the charcoal canister and plug up the purge valve hose OR even just plug up the throttle body ports BUT leave the factory PAIR valve system? I prefer having the decel pops and bangs for my bike.
Can I just remove the EVAP system but keep the PAIR valve system then ??
What the function of blocking the ais System???
I have ninja 400, well in my country is new ninja 250, i have a question, my bike is fully standard, no ecu tunning, no remap, just aftermarket exhaust. Can I block the AIS System??? Or is that okay to block off the AIS System.
Bcs my friend block the AIS System and the exhaust is Brappp bapp bapppp🗣️🗣️💥💥💥💥 and honestly I want it too😅
So to do the smoke block off kit on the zx10r, would those dummy plugs work on my bike as well from the zx4r too? And it appears I need 2 of the dummy plugs?
We have not tried the dummy plugs on the 10 but Kawi is pretty systematic in this type of equipment and how the ecu senses it. I can't guarantee them working but chances are good.
here we go. one mod after another
Questions. Say I get the ECU tune, and decide later to do the block-off plates. Retune needed?
No retune needed for that.
-BR
The factory screws are too long. The plates I received were thinner than the thickness of the factory valves: you’ll need washers or shorter screws.
why do we need to remove the reed valves ? cant we install them as it is > Thanks
Why would you want to keep redundant parts that are no longer needed for any function? If you want to keep them in there and you manage to fit them then go ahead.
What exhaust is that?
Akrapovic
Sooo to be simple track racer should continue polutte the air...? Sound nice