For $10-20 you can get a used server power supply 1200w 100A 12V. They can be modified to produce 12-15.5v depending on the resistor values used. I use HP DPS 1200 FB/1 HSTNS PL-11 as I find it the most reliable and easy to modify. At 14v it can supply up to ~83A of stable current..which is perfect for BMW programming.
Question do you know which pin on CPU is boot and is the boot pin is same to other ECU? im trying to read one CPU that is same but there is no schematic on boot ? Thanks !
Hello. If the CPU is the same then the Boot pin is the same, imagine that if you should have read the order of the pins in the programmer it will always be the same if it is the same CPU
@@YOYODiagnostic ok thats good only need to remove one CPU of known ecu to see boot to which ball going i also have pdf for a tc1769 but can not understand where is boot. Thank you !
No BDM on on Tricore mate processors, it's Ttag (adaptor)
How are you is this CBAB backup? Would you mind sharing with me? I used FC 200 to read and it's no rpm on instrument cluster
I used tricore kess v2 clone. No problem at all.
i have EDC17CP14 after reading with Ktag it shows Error : serial programming activation
Some EDC17CP14 readed by Kess in boot read only partial read, but with Ktag always read a full read.
👍
03L906022B kess obd ok?
With original yes. With clone you need VR file from 09 year.@@valentinlazar2049
How many amps the power supply needs to be? I found a good one for 50€ with 2amps. Should that be fine?
Yes , 2A it's ok.
@@YOYODiagnostic thanks a lot
@@lowrider69yearsago58
You are welcome.
For $10-20 you can get a used server power supply 1200w 100A 12V. They can be modified to produce 12-15.5v depending on the resistor values used. I use HP DPS 1200 FB/1 HSTNS PL-11 as I find it the most reliable and easy to modify. At 14v it can supply up to ~83A of stable current..which is perfect for BMW programming.
Why not read by obd?
OOOOLEEEEÉ OLÉ OLÉ OLEEEEEEÉ....YOOOOYOOOO....YOOOYOOOOO!!!!!
Can you read this with clone PCMFLASH without opening the ecu?
Hello.
I don't have PCM Clone. I don't know for sure 😊
@@YOYODiagnostic Yes I have just received that device and it can do that
@@mustaphaessahihi1762
Thanks for the information shared with us. 👍
Question do you know which pin on CPU is boot and is the boot pin is same to other ECU? im trying to read one CPU that is same but there is no schematic on boot ?
Thanks !
Hello.
If the CPU is the same then the Boot pin is the same, imagine that if you should have read the order of the pins in the programmer it will always be the same if it is the same CPU
@@YOYODiagnostic ok thats good only need to remove one CPU of known ecu to see boot to which ball going i also have pdf for a tc1769 but can not understand where is boot. Thank you !
Can you send me the flash memory from this computer, I need it
yoyo.pc86@gmail.com
Ktag clone china or oem?
Chinese of course