How to Use a Plunge Router the RIGHT Way!
HTML-код
- Опубликовано: 13 окт 2024
- In this video I show you how to use a plunge router the right way. The router is the MOST versatile tool ion the shop. I own 4. How many do you own? Let me know in the comments!
Thanks for watching! I appreciate you.
Here are some of the items in my video I would recommend. They are Amazon affiliate links so I do make a small % of your sale if you buy through these links. It's not much but helps support that channel.
Dewalt 20v Max Router: amzn.to/35nlORu
Dewalt Plunge Attachment: amzn.to/3g41Zkj
Graph Paper: amzn.to/3GOMwQQ
Pencils : amzn.to/3KzDx8k
3M Worktunes : amzn.to/3frLz4Q
Iso tunes Pro: amzn.to/3GwMYmy
3M P100 Mask: amzn.to/3Fu5QBp
PAPR Respirator : amzn.to/3Fu5QBp
24 Pack of Safety Glasses: amzn.to/3tuNPka
Safety glasses: amzn.to/34RwGqG
#RUclips #woodworking #twinforkswoodco #twinforksworkshop #chrisbernichon #bowties #howto #diy #joinery #woodjoinery #walnut #maple #makers #maker
Music from Uppbeat (free for Creators!):
uppbeat.io/t/s...
License code: O8VCBT5VBTHDXUTQ
brother im like 2 minutes in and your energy is mellow and rad
sawdust will now forever be known as ‘man-glitter’ for me. thank you.
Thanks tor watching!
Wish all of youtube would be this informative. Learned what I came here for, wasted 0 time... Honestly this is more valuable than 78% of my recommendations. And I'm a photographer :D They should encourage this type of content instead of "lengthy videos=more money" business model :D
Thanks! Appreciate you watching!
*I absolutely love this tool!!! The first one was defective and Dewalt replaced **MyBest.Tools** More bulky than the Bosch and Makita corded palm routers I have but worth it. Nice solid base*
I love that the same base works on the corded and cordless. Makes it very versatile!
Thanks, very helpful. I learnt a lot in a short time. Live long and prosper...
Gee wizz I'm so lucky to have found this video because this guy is the only person in the world that knows how to use the plunge router.
Thanks!
Thanks for getting straight to the mechanics of the tool. Your presentation didn't waste my time and made the tool's operation intuitive.
I'm used to larger, corded routers ruclips.net/user/postUgkxfQ5_mgwq6PcudJvAH25t-I4D-3cTPz4z so this was a different experience for me. Basically, this is an incredibly sweet machine, fits well in the hand, etc. It has slightly less power than I'm used to, but that's understandable. Maneuvering freehand takes some practice. These days, it's especially nice to be able to avoid power cords. This is above the level of a hobbyist but below a pro level.
Thank you!
enever used a router before. you managed to show me exactly what i needed when the manual and official video coundn't. saved me hours of hair pulling cheers!!!
Cheers! Thanks for watching.
So valuable thank you. My brother gave me a Dewalt router for Christmas. He got it from his brilliant Woodworker friend, and it came second had without the instructions, so this is so helpful for me, thank you! The instructions I needed. Ali Rowe. xx
Thanks for watching!
Short into the point but super informative, thank you this is exactly what I need to get started.
Thanks for watching!
Just got the set you used. Thanks for the lesson.
Dude! Thank you for fast , to the point guides.
Thanks for watching!
The Dewalt cordless router with the plunge attachment is amazing. The corded 2 hp router is the best also.
I agree!
EXCELLENT Chris .........I 'm retired and just got this
Thank you so much for the help. Peace
Thanks for watching! I really appreciate it. Hope you are enjoying retirement!
Just bought the Dewalt DW618PKB .Never used a router and this video sure helped me.Thank you,sir…!!!
Thanks for watching!!
Nice video buddy, clear and concise to the point.
Glad you liked it! Thanks for watching!
Let the opening and closing ads run.
He cleared this issue for a lot of us,
and without making it a 22 min video,
with 13 midroll ads that none of us
let run. I haven't used a router in
decades, what helped me was
that much of the routing process
is best done in multiple passes,
not ALL AT ONCE, at ramming speeds.
Thanks for watching!
No bullshit just straight to the point. These things aren't as common over here in Holland so I just needed the general idea. This helped a lot!!
Appreciate that! Thanks for watching!
Simple and straight to point 😊
Thanks for watching! That’s what I’m going for. Thanks for noticing!
Very helpful. I have not used my router as a plunge yet. Love "man glitter".
Thanks for watching!
Your a bloody star hombre, easy to follow, just what a numbnut like me needs, subscribed😅
Thanks!
Well done sir, thank you.
Very welcome. Thanks for watching!
Perfect instruction! Thank you
Thank you for watching!
I appreciate the tutorial. Everything's easier when you know how. 👍
Thanks for watching! What are you planning to use your router for?
@@chrisbernichon I ordered shaker style doors. When they came all they were was three-quarter inch MDF sheet with a routed out center to make it look like a shaker door. I mis-measured a pair that are the wrong size. And I have some leftover MDF. So I will try to copy the doors by using a router jig with stop blocks.
@@waynemiller6070 Very cool, do it outside if you can. MDF is a MESS.
@@CTEwithMrB In the 90s today. So yes. Lol Using dust collection even outdoors too.
Amazing!! I just bought some floating shelves and I want to add LED strips flush to the bottom, illuminating the shelf below it!! Going to have my art supplies above my desk, perfume collection above that and the top shelf my collectibles (funkos, scale models).
That’s going to look great! Send me some pics when you’re done to be featured in a future video!
@@CTEwithMrB ok will do
Very useful information, thanks for sharing this video with us 🙏🏼
Thanks for watching!
Thanks. Very helpful.
I appreciate you watching. Glad you liked it!
Great video. I have the Dewalt plunge base and have never tried it yet. This gives me the basics to try it out. Thanks !!
What bit should I use for plunge routing?
Thanks! I like to use an up spiral plunge bit. Amana makes a great bit, and they are affordable. Check this one out amzn.to/37higlb.
Great help
Thanks for watching!
You had me at man glitter.
The best kind!
I love the Man Glitter reference 🤣🤣😂😂😎😎
Thank you!
appreciate ur effort, thx
Thanks!
Check out the 3m Peltor headsets. Will be a life changer blocking out highs and hearing lows at same time
Thanks!
Great video ... thank you
Thanks for watching!
Can I use the plunge router to make a 1/2 in round over? By using the step down as you have shown.
You don't need a plunge router to do a round-over. You need to purchase the correct size round over bit.
What’s better than a guy teaching you how to use a power tool with bandaids all over his hands!😂
I typically learn things the hard way haha
Where did you get the round base for the plunge router?
It is a centering jig from Rockler. It came in clutch when I had to cut 100 mortises for a crib I built. www.rockler.com/rockler-compact-router-mortise-centering-base
When it comes to plunge routers, is it safe to use a collet extender with them? Or is that strictly a router table thing only?
I’m wondering if I can use a plunge router with an extender to do a 4” plunge cut on a 6x6 piece of timber. If not, I’ll probably just use a whopper blade on a jigsaw do make the cut.
Personally, I would use an auger bit and then use a chisel to square up the opening. amzn.to/3R5y50Z . The collet extenders I’ve seen don’t recommend their use on plunge routers so definitely check with the manufacturer. P.S. I bent a flattening bit on a router sled and nearly 💩 myself; I understand why they don’t recommend it 🤣
This may be a dumb question but can you do trim work and edge profiling with this type of router or are compact routers the only type that can do that.
You can use any plunge router for trim work. You just set your depth before cutting. The best part about this router is the plunge base and fixed base are interchangeable. That way, when doing a simple round-over, you can put a smaller, easier-to-handle base on.
@@CTEwithMrB Thank you.
Good clear video. I have the corded version of this Dewalt router. Have been nothing but disappointed with it. Poor dust collection. Painful to change bits. Just not well designed. So wish I had just bought a Festool one straight away.
Really? I left mine off for the purpose of the video but have you tried this? amzn.to/3KcPijP they make one for the fixed base too amzn.to/3K4ThPv.
Yes both these came with the Dewalt kit. They are terrible to use. They get in the way and they don’t work well at all. It is a poorly designed system.
@@murphyrp01 so what are you going to get instead?
Next router will be Festool 1400. Made the mistake thinking that Dewalt was a very good brand. Having got Festool track saw and sander the difference is significant.
@@murphyrp01 that looks like a solid unit. I’m always leery of the festool premium. I have a rotex which I really like but find it’s to much sander for finish standing. I have their cheapest dust extractor that is an awesome value.
Whatever your preference, as long as you’re in the shop making dust that’s all that counts!
Thank you for the info! What bit are you using?
never mind just saw comment below.
I wish I saw this video before I messed up my project ;)
It happens to all of us. Last time I made a mistake with a router it cost me 8 stitches. It’s super frustrating but it’s just another learning experience. You got this!
Thanks for sharing, how do you finish the corners, the radius of the bit will prevent you from getting a sharp corner, like the bow tie has, do you finish with hand tools, or a smaller bit, or....?
Great question! Once you get the majority of the bow tie cut out, you test your fit and use a chisel to get your sharp corners and tight fit. The method is called sneaking up to the fit. You take small bits off at a time until it is perfect.
KISS! Love it!
Thanks!
So, to be sure, you /don't/ start with the 1/2" you originally set it at? Saw twice at 1/4"?
Yes it is always best to take multiple lighter passes when using the router. It will help keep your bit sharper for longer by preventing burning, and it is less likely to kick back at you.
how do you cut straight lines?
The adjustment ring on the router is removed when you are using the plunge base. The router will set flush at the bottom of the base with the ring removed, according to the directions included with the plunge base.
That’s right. I leave it on so it doesn’t get “lost” like every tape measure and pencil I own the second I need one.🤣
I make molding in my fridge.
How did it come out?
I am desperately trying to find a video or something on making a display for my gemstone eggs and spheres. I want to make various size crescent cuts in wood slices that will hold the gems. My eggs are all different sizes. I have an idea of what I want and bought an inexpensive router and Baihens 1/4 Inch Shank Cove Box Router Bit Set Solid Double Flute Nose Bits. Help?
Hi Kelle, that sounds like a fun project! I’d love to help you with that. I’d say start by tracing each one in the position you want them, use a plunge router to remove most of the wood, and then come in with a chisel to clean it up. If you end up with a hole that’s slightly larger than you need you can put a bevel or round over by hand sanding to ease the edge. That will help hide any imperfections or fill it carefully with epoxy and a syringe. If you’d like we could hop on a quick video chat so you can show me what you’re working with. Send me an email, or DM!
No, you described the stop block backwards. I found your description confusing.
Whats the maximum depth? I can't find any video that shows the depth of 50 to 70 mm.
I want to route holes for door hinges for a pivot door. The upper hinge has a depth of 67mm, and the lower hinge has a depth of 58mm.
I already found out I can buy a 70mm bit in length. But can all routers support all sorts of lengths?
If not, can somebody advise me on which router should fit my job? It has to be a plunger.
I would use a guided drill for the deep part of the pivot hinge, and then any router/chisel to recess the plate. You can get them fairly cheap on Amazon. amzn.to/3RBus2J
@@CTEwithMrB Thank you 🙂👍🏽
@@cyberpunk_89 no problem! Thanks for watching! Send pics of the doors when you’re done and I’ll feature it!
@@CTEwithMrB Alright, I will 😁
Finally 🙌
Thanks!
That is how you Set Up a plunge router. I would have liked to see you USE a plunge router.
How much
They run about $200. Here’s one I have: amzn.to/39ieNn3
I want to work with you
What do you do?
Man glitter lol.
🎉
Not sure it was all that informative. When you say you're gonna show how to use a tool. It's best to explain it while actually doing a project.
Thanks for your feedback!
Great clip, very informative
For a Rookie, this was excellent
He showed me exactly how to use it. If he would have said I’m going to show you exactly how to make a certain type of cut, then I would have expected that. Great video.
You HAD me all the way....UNTIL....you got the part "we're only gonna cut into the piece by 1/4". You moved the turrett, but didn't show or elaborate and what you did. One could only assume you moved the turrett 1 twist to bump UP to the next higher one. Assuming then that you will finish the first pass at the 1/4, then just move the turrett to the next lower and pass again at 1/2"????? I thought it was GREAT till that part I mentioned
I see what you mean. Thanks for pointing that out. Around 1:11, I explain each increment of the turret is 1/4" and we are going 1/2" deep. Two passes, a quarter of an inch at a time. Thanks for watching!
@@CTEwithMrB Can I give you a scenario and you can help me out please. I ONLY need a 3/8" dado cut for my T-track. Now, assuming, I ZERO out my bit on my workpiece first. Then I set my depth gauge to 3/8.
If I want to take the plunge incrementally (i.e. 1/8th at a time for each pass, then if use the tallest turret for the first pass, then I move it to the second turret, then the third.....Are you saying that each time I move it, I'll be cutting an additional 1/4"?? Or does the turret truly represent a quarter of your cut each turn?
In other words, the tallest turret being used first will give you 1/8, then the second will drop the cut an additional 1/8, and then the third turn will drop you down to the 3/8?
I'm confused!!!
Reply plz
reply
Wher from u
@@rhussianfromganderbalhussa3748 New York. You?
Kid showing off his brand new high price, high tech toys, grow up man !°!
🧰
Very unclear
Thanks for your feedback!
I just farted..
I thought I smelled something.