That's a really great tutorial! Without saying a word, you teached us a lot! Appreciate it man 👌 And this video finally convinced me to get the Action 4 over Pocket 3 or anything else. With GyroFlow a gimbal is almost rendered useless, save for tracking perhaps.
Thanks for the kind words! Action 4 has its downsides, too. I have to deal with blurring of the picture due to camera shake. For this you have to make a fast shutter speed, and therefore we get a lot of noise in the picture. On gimbal there is no such problem. And for comfortable work GyroFlow needs a modern computer. You can download the RAW video in the description and see how much noise there is. I wish you to make the right choice!
@@tripsandwalks3177 присоединяюсь )) Очень вкусно вышло. А, кстати, почему внутренний электронный стаб не использовали? Не, я понимаю - не спортивно и все такое, но у меня вопрос - стаб камеры совсем плох при таком освещении?
Wonderful walk through of editing... I am very new to Davinci and video editing in general and this was helpful. I do wish that there was voice commentary explaining what you were doing and why - I could have really learned even more.
Hi. Thank you. I didn't have the task to make a detailed tutorial video with explanations. I just showed one of my workflows from start to finish. There are many other videos on youtube for entry level.
Thanks for sharing! Have you tried using a fixed shutter speed? Eg. the classic 180'... Ive heard using 90', 45' and then add motion blur in post, will reduce any unwanted jello once the footage is stabilized.
Hi! I found for me a balance between shutter speed length, amount of noise and blurring of the picture from camera shake. You can try other combinations. If you make the shutter speed shorter by half, you'll get twice as much noise, but half as much blur from camera shake. It's your choice. I don't really want to use a fixed shutter speed, it's a hassle for me. It's an action camera, I want to get it out and shoot without any fuss.
Did you do anything special to remove the grain from the footage (video noise?) Can clearly see it in the unedited footage but looks perfect in the edited
Hi! No, I didn't do anything extra. Just what I showed in the video. After the final editing, the noise still remained. It's just that RUclips has additionally blurred it. It was possible to remove the noise even more in Resolve, but I did not. This would greatly slow down the work with the video.
What settings are preserved in the LUT? I noticed when saving a custom LUT some things like the brightness from the curve adjustment and sharpness do not apply.
Everything about the color is stored in the LUT. Sharpness, motion blur, noise reduction and similar effects are not saved. But brightness I think should be saved, although I'm not sure. I don't use homemade LUTs, what I used in the video is the built-in Resolve LUT.
@@TheInvisibleTraveler I'm sorry, I still didn't understand what Color Upgrade is. Perhaps you mean Color Grade. The camera itself has two color options - standard and D-Log M. The standard one does not need to be adjusted, the D-Log M can be processed in any video editor. On your phone or computer.
Hi! Of course Rocksteady would do a great job with these videos. But I wanted to work with Gyroflow and see what would be better and more comfortable for me. I don't want to tell you that you have to use Gyroflow. As a result I concluded that Gyroflow stabilizes better than Rocksteady and cuts edges less, i.e. it is possible to get a wider angle of view with Gyroflow than with Rocksteady. But for this you have to pay additional work on the computer and not everyone will want to do it.
Hi! Action 4 only writes gyrodata in two modes - 4k 4x3 50\60 fps and 4k 16x9 100\120 fps. Rocksteady must be disabled and Wide angle must be selected. The camera shows you this information when you disable Rocksteady. If you have selected the correct shooting modes, but gyroflow still doesn't see the gyro data, I have no idea how to fix it.
These settings are at the beginning of the video. I'm surprised you couldn't find them. 4k 50 fps 4x3 RockSteady Off D-Log M ISO 100 - 12800 Shutter 1/100 - 1/8000 WB Auto FOV Wide Sharpness -2 Noise Reduction -2
Hi! I don't quite understand what your problem is. You may need to find the [Image adjustments] -> [Custom] menu item. There is an option to adjust the sharpness
You should know that Action 4 only writes gyrodata with stabilization turned off. If you are not going to use Gyroflow, of course turn on stabilization and whatever you want.
Nice video ! Can you share the raw footage by google drive or dropbox? I am very interested in aciton 4 for long time, but not know its performance in low light cirumstance, just want to see this raw footage for reference.
GyroFlow is free, and it works just as well with GoPro. The free version of Davinci will not have noise reduction, but editing and working with color and sound are available.
@@tripsandwalks3177what is the software you used for editing? As per my understanding first you used gyro Flo for stabilisation and later for editing? Any free software to edit videos too you could recommend?
Forgot to mention this, 4x3 50\60 fps is one of the few modes where the camera records gyrodata. Gyroflow can't work without it. 4k 16x9 does not record gyro data.
@@tripsandwalks3177 Ещё раз приветствую! Попробовал ваш метод, не все получилось как надо, буду дальше экспериментировать. Я вот что хочу спросить - зачем вы конвертируете цветовое пространство? Я про ноду Color Space Transform. Что это даёт, если не секрет? У меня картинка получается слишком светлой после этой операции и шум лезет просто бешено.
I'm a beginner. I just started learning video editing. You are amazing. Thanks for the inspiration ✌
Amazing editing skills! Just bought the Action 4 , so thank you very much for sharing.
you're welcome
MAGIC?! 👏👏👏
bruh, pro entering the arena. thank you good sir.
Video was amazing. Thank you for taking some of your time to share some of your knowledge, I hope you continue to do so.
Thanks! I'm glad I was helpful.
That's a really great tutorial! Without saying a word, you teached us a lot! Appreciate it man 👌 And this video finally convinced me to get the Action 4 over Pocket 3 or anything else. With GyroFlow a gimbal is almost rendered useless, save for tracking perhaps.
Thanks for the kind words! Action 4 has its downsides, too. I have to deal with blurring of the picture due to camera shake. For this you have to make a fast shutter speed, and therefore we get a lot of noise in the picture. On gimbal there is no such problem. And for comfortable work GyroFlow needs a modern computer. You can download the RAW video in the description and see how much noise there is. I wish you to make the right choice!
@@tripsandwalks3177 For low light shots I'm going to use Sony A6400 with Sigma primes and Pixel 7pro. Action 4 in decent lighting conditions.
Okay. I too use a big Sony camera when I'm not too lazy to carry it around with me 🙂
Как уже заметили англоязычные друзья - хорошие навыки редактирования, из пикселей так картинку вытащить - моё почтение. :)
спасибо)
@@tripsandwalks3177 присоединяюсь )) Очень вкусно вышло. А, кстати, почему внутренний электронный стаб не использовали? Не, я понимаю - не спортивно и все такое, но у меня вопрос - стаб камеры совсем плох при таком освещении?
Wonderful walk through of editing... I am very new to Davinci and video editing in general and this was helpful. I do wish that there was voice commentary explaining what you were doing and why - I could have really learned even more.
Hi. Thank you. I didn't have the task to make a detailed tutorial video with explanations. I just showed one of my workflows from start to finish. There are many other videos on youtube for entry level.
Great video! Lots of things I didn't know about 👍
Thank you! I'm glad you learned something new.
Thank you for your information, I have not tried yet, soon or later.
I will try it, by my old footages, thanks for sharing your experience.
Thanks for sharing! Have you tried using a fixed shutter speed? Eg. the classic 180'... Ive heard using 90', 45' and then add motion blur in post, will reduce any unwanted jello once the footage is stabilized.
Hi! I found for me a balance between shutter speed length, amount of noise and blurring of the picture from camera shake. You can try other combinations. If you make the shutter speed shorter by half, you'll get twice as much noise, but half as much blur from camera shake. It's your choice. I don't really want to use a fixed shutter speed, it's a hassle for me. It's an action camera, I want to get it out and shoot without any fuss.
@@tripsandwalks3177 thanks for your input
Did you do anything special to remove the grain from the footage (video noise?) Can clearly see it in the unedited footage but looks perfect in the edited
Hi! No, I didn't do anything extra. Just what I showed in the video. After the final editing, the noise still remained. It's just that RUclips has additionally blurred it. It was possible to remove the noise even more in Resolve, but I did not. This would greatly slow down the work with the video.
In Color Correction he added a NR node and you can see what he did to do Noise Reduction in that part
Вы GyroFlow используете только как приложение? Плагином для ДаВинчи не пользуетесь? Так удобнее?
Привет! пользуюсь плагином, но он тормозной и глючный. Иногда удобней приложением, иногда плагином.
@@tripsandwalks3177 слушай, если меня что-то будет не получаться, можно я спрошу?
Спасибо за видео. Собираюсь использовать в схожих условиях. Интересно будет сделать по такой же методе и сравнить результат
amazing. Thanks so much
What settings are preserved in the LUT? I noticed when saving a custom LUT some things like the brightness from the curve adjustment and sharpness do not apply.
Everything about the color is stored in the LUT. Sharpness, motion blur, noise reduction and similar effects are not saved. But brightness I think should be saved, although I'm not sure. I don't use homemade LUTs, what I used in the video is the built-in Resolve LUT.
nice editing
Nice
Color upgrade option available on osmo action 4 is already available or we have to use other program to upgrade colors?
Please specify what it is about. I didn't understand which option you were talking about.
@tripsandwalks3177 I mean to say that can you upgrade colors on osmo action 4 or you need a pc to do that?
@@TheInvisibleTraveler I'm sorry, I still didn't understand what Color Upgrade is. Perhaps you mean Color Grade. The camera itself has two color options - standard and D-Log M. The standard one does not need to be adjusted, the D-Log M can be processed in any video editor. On your phone or computer.
@tripsandwalks3177 yes, D-log M can be processed on camera?
no
hi. may i know why you wouldn't turn on the rocksteady?
Hi! Of course Rocksteady would do a great job with these videos. But I wanted to work with Gyroflow and see what would be better and more comfortable for me. I don't want to tell you that you have to use Gyroflow. As a result I concluded that Gyroflow stabilizes better than Rocksteady and cuts edges less, i.e. it is possible to get a wider angle of view with Gyroflow than with Rocksteady. But for this you have to pay additional work on the computer and not everyone will want to do it.
my gyroflow does not detect that its a osmo 4, you know how to solve this problem ( i did record with good settings )
Hi! Action 4 only writes gyrodata in two modes - 4k 4x3 50\60 fps and 4k 16x9 100\120 fps. Rocksteady must be disabled and Wide angle must be selected. The camera shows you this information when you disable Rocksteady. If you have selected the correct shooting modes, but gyroflow still doesn't see the gyro data, I have no idea how to fix it.
thank you
@@tripsandwalks3177 how do i get my workspace like yours?
Can you give me your dji action setting for night mode?
These settings are at the beginning of the video. I'm surprised you couldn't find them.
4k 50 fps 4x3
RockSteady Off
D-Log M
ISO 100 - 12800
Shutter 1/100 - 1/8000
WB Auto
FOV Wide
Sharpness -2
Noise Reduction -2
Вы снимали объектив с камеры?
Нет, это ничего не даст
Hallo, thanks for sharing, sharpness is disabled in my camera, I tried so hard to enable it in the settings but it didn't work. May you please advise
Hi! I don't quite understand what your problem is. You may need to find the [Image adjustments] -> [Custom] menu item. There is an option to adjust the sharpness
what if i just turn on rocksteady and use normal color, is it still okay if i use your setting in day light and low light?
You should know that Action 4 only writes gyrodata with stabilization turned off. If you are not going to use Gyroflow, of course turn on stabilization and whatever you want.
@@tripsandwalks3177thank you sir
@@tripsandwalks3177привет, гирофло лучше чем рокстеди? У меня есть блекмейджик и она записывает гироданные. Интересно что лучше давинчи или гирофло
Nice video ! Can you share the raw footage by google drive or dropbox? I am very interested in aciton 4 for long time, but not know its performance in low light cirumstance, just want to see this raw footage for reference.
Thanks! I added a link to the dropbox for 3 files in the description of the video.
You are very kind! I have download it.@@tripsandwalks3177
How did you took these video, by hand?@@tripsandwalks3177
👏 👏 👏
Is it a free software for windows 11?
Will I be able to do for go pro 8 too?
GyroFlow is free, and it works just as well with GoPro. The free version of Davinci will not have noise reduction, but editing and working with color and sound are available.
@@tripsandwalks3177what is the software you used for editing? As per my understanding first you used gyro Flo for stabilisation and later for editing? Any free software to edit videos too you could recommend?
Да, качество у нее получше будет, чем на dj2. Сенсор больше и процессор лучше.
видимо да, мне главное чтобы лучше чем GoPro7 была, с которой перешел, до этого не пользовался предыдущими версиями DJI Action
what is the point is shooting in 4:3?
The point is framing in post-processing. During stabilization in GyroFlow you can also move frame up and down.
@@tripsandwalks3177 don't you lose resolution if cut the footage?
The width of the frame is the same. It is cropped at the top and bottom. Resolution is not lost. But if you stabilize it, of course it will be lost.
Forgot to mention this, 4x3 50\60 fps is one of the few modes where the camera records gyrodata. Gyroflow can't work without it. 4k 16x9 does not record gyro data.
Блин, как жалко, что без озвучки
Напишите что не понятно, постараюсь коротко ответить
@@tripsandwalks3177 да, в общем, понятно, но вот вопрос созрел. Видео с Осмо 4 уже содержит данные с гироскопа?
@@VictorSkopets да, но не во всех режимах съёмки. 4к 50 ФПС 4х3 и 2,7к 100 фпс 16х9 при отключенной стабилизации
@@tripsandwalks3177 Ещё раз приветствую! Попробовал ваш метод, не все получилось как надо, буду дальше экспериментировать. Я вот что хочу спросить - зачем вы конвертируете цветовое пространство? Я про ноду Color Space Transform. Что это даёт, если не секрет? У меня картинка получается слишком светлой после этой операции и шум лезет просто бешено.
wtf?!!!
Thanks. You are awesome
Thanks!