Instructions were easy enough for the basic hand truck i bought. I knew i put it together right but couldn't understand how i had two leftover fat washers but it explains in this vid. Hopefully this serves me well.
Hi Alex, we are glad you were able to successfully assemble your new hand truck. We believe it will be a quality tool for you. Thank you for choosing Magliner.
Assembled mine today, directions were subpar and seemed to have been made by someone who assumed you knew interim steps… between this video, the directions and some trial and error finally got it assembled luckily the hand truck is of better quality than the instructions
Glad to see theres a video. Its helpful as well you have a picture of tools needed. If i may make a suggestion listing tools by name helpful for those who need it. Thanks for everything
Hello, it depends if you are using the hand truck with or without C5 Stair Climbers, which we recommend if you will be navigating stairs often. With C5 stair climbers, the hand truck rests on the C5s, not the tires, when in use on stairs.
1/4" and 5/16" bolts don't seem to relate to the size of the wrench needed for tightening the nuts. Would naming them 7/16" and 1/2" for the nut sizes be more consistent?
By 1/4"-20, that refers to the diameter of the bolt shaft (1/4") and threads per inch (20). By 5/16"-18, the bolt shaft diameter is 5/16" and there are 18 threads per inch.
Hi Vp sh, We are sorry to hear that you had a difficult time assembling your Magliner. Typical assembly should require only one person. We would like to hear more about the issues you were having. Please email customerservice@magliner and we will see if we can offer any additional support.
@@MaglineInc Thanks for response and attention. Means a lot. The difficult part was attaching the base and wheels. I ended up putting it together with Trial and error as someone else posted.
Sometimes this happens when the hand truck is assembled with the axle in the incorrect position in the wheel bracket. If that is not the case, please send photos to customerservice@magliner.com and we'd be happy to take a look!
I've found, at least where I work, having the plate flush with the ground is actually a profound disadvantage. We use these things to pick up hundreds of stacks about 8 feet high, on a daily basis, and something about the plate being mounted higher makes it easier to shove the plate up under stacks. It works for us because we don't need to be delicate with the containers though so take this with a grain of salt.
mine didnt come with directions only for the brake assembly which is still very vague! smfh🙄, there is 2 small square plates also that I have yet to figure out where they go or what they are for, its like you need a freakin degree to put this shit together, very ridiculous
Thank you for your honest feedback. The Paddle Brake Truck is a product slated for an assembly video; we understand it didn't help in your case but it will be a video added in the future.
@@Rob-to4uk Please send a picture of the issue to customerservice@magliner.com. We will troubleshoot any issue you may be experiencing and we can walk you through the final steps.
To see what wheels you have, read the SKU part # on the tires (e.g. #131010) and then visit: www.magliner.com/comparative-wheel-data-link to find out details under that wheel SKU number. In the video the wheels are referred to as 1080, 1075, 1070, 850, etc but you can also get those numbers from stripping off the first two leading digits of the SKU #. For example, my 131010 wheels were "1010", so they belong to "other" as far as washer spacings go.
Hi Edward. We are sorry to hear you are having trouble installing the C5 stair climbers to your hand truck. Please send a picture of the issue to customerservice@magliner.com. We will be glad to walk you through the installation or troubleshoot the issue so that you can get your hand truck fully assembled as soon as possible.
I would not have figured it out by the terrible instructions. This video is perfect!!
Instructions were easy enough for the basic hand truck i bought. I knew i put it together right but couldn't understand how i had two leftover fat washers but it explains in this vid. Hopefully this serves me well.
Hi Alex, we are glad you were able to successfully assemble your new hand truck. We believe it will be a quality tool for you. Thank you for choosing Magliner.
Assembled mine today, directions were subpar and seemed to have been made by someone who assumed you knew interim steps… between this video, the directions and some trial and error finally got it assembled luckily the hand truck is of better quality than the instructions
Thank you for your feedback. We will review our instructions and determine where we can make improvements.
instructions are horrendous
Glad to see theres a video. Its helpful as well you have a picture of tools needed. If i may make a suggestion listing tools by name helpful for those who need it.
Thanks for everything
Thank you for the feedback! This is very helpful. We are working on additional assembly videos, and will incorporate this in the future.
Could you create a video for a Magliner that holds five 5 gallon water bottles?
Hi Ezell! Are you interested in a video that gives an overview of the Magliner Bottled Water Trucks or an assembly video for one?
@@MaglineInc A video to show how to add the flaps to hold five 5 gallon water bottles.
Which one is particularly better for going up and down stairs, 8” or 10” wheels?
Hello, it depends if you are using the hand truck with or without C5 Stair Climbers, which we recommend if you will be navigating stairs often. With C5 stair climbers, the hand truck rests on the C5s, not the tires, when in use on stairs.
1/4" and 5/16" bolts don't seem to relate to the size of the wrench needed for tightening the nuts.
Would naming them 7/16" and 1/2" for the nut sizes be more consistent?
By 1/4"-20, that refers to the diameter of the bolt shaft (1/4") and threads per inch (20). By 5/16"-18, the bolt shaft diameter is 5/16" and there are 18 threads per inch.
Had to dig holes in them to put the handrails and needed two people to align and assemble
Further it will take you 2 hours to install… that is if ure an expert and have tools in hand….
Hi Vp sh, We are sorry to hear that you had a difficult time assembling your Magliner. Typical assembly should require only one person. We would like to hear more about the issues you were having. Please email customerservice@magliner and we will see if we can offer any additional support.
Got mine today. Included instructions are poor and so is this video .
Thank you for the feedback. We will review our instructions to see if there are any improvements we can make.
@@MaglineInc
Thanks for response and attention. Means a lot. The difficult part was attaching the base and wheels. I ended up putting it together with Trial and error as someone else posted.
@@apostolicway2604 We are glad to hear that!
Why aint my nose plate flush to the ground
Sometimes this happens when the hand truck is assembled with the axle in the incorrect position in the wheel bracket. If that is not the case, please send photos to customerservice@magliner.com and we'd be happy to take a look!
@@MaglineInc i figure out out thanks tho
I've found, at least where I work, having the plate flush with the ground is actually a profound disadvantage. We use these things to pick up hundreds of stacks about 8 feet high, on a daily basis, and something about the plate being mounted higher makes it easier to shove the plate up under stacks. It works for us because we don't need to be delicate with the containers though so take this with a grain of salt.
mine didnt come with directions only for the brake assembly which is still very vague! smfh🙄, there is 2 small square plates also that I have yet to figure out where they go or what they are for, its like you need a freakin degree to put this shit together, very ridiculous
Thank you for your honest feedback. The Paddle Brake Truck is a product slated for an assembly video; we understand it didn't help in your case but it will be a video added in the future.
How do I put the diecast nose into the frame? Your video mentioned it, but didn't actually show you anything. Useless.
Am I supposed to beat it into place with a mallet?
Please see the 1:17 mark.
@@MaglineInc Am I supposed to beat it into place with a mallet?
@@MaglineInc I cannot get the die cast nose into the frame without breaking something.
@@Rob-to4uk Please send a picture of the issue to customerservice@magliner.com. We will troubleshoot any issue you may be experiencing and we can walk you through the final steps.
To see what wheels you have, read the SKU part # on the tires (e.g. #131010) and then visit:
www.magliner.com/comparative-wheel-data-link
to find out details under that wheel SKU number.
In the video the wheels are referred to as 1080, 1075, 1070, 850, etc but you can also get those numbers from stripping off the first two leading digits of the SKU #. For example, my 131010 wheels were "1010", so they belong to "other" as far as washer spacings go.
Yes, the 131010 is part of the "other" wheel category.
Stairclimber top piece doesn’t align with any of the pre drilled holes… followed the instructions. Super confused
Hi Edward. We are sorry to hear you are having trouble installing the C5 stair climbers to your hand truck. Please send a picture of the issue to customerservice@magliner.com. We will be glad to walk you through the installation or troubleshoot the issue so that you can get your hand truck fully assembled as soon as possible.
@@MaglineInc I got it figured out 👍