Good video. I can't wait to get mine! I agree with the ending sentiments that this will fulfill a lot of needs for a lot of people. I plan on recording full songs as well as what I'm gonna call karaoke tracks. Some may be covers, but I also want to do full backing tracks for original songs with the drums, bass, instrumentation and backing vocals.
Question: when changing pattern mesurses , (lets say to 4) i don't see an indicator anywhere. How will I know when I'm nearing the end of the 4th mesure? Is it only by listening? Thanks in advance
Hi, Ian! Thanks for your interest. There are four lights near the bottom left of the MV-1's surface, in between the start/stop button and the measure [] buttons. These are an indicator to show you which measure you are on. Hope this helps, and feel free to reach out to me directly if you have further questions! Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com
An 8 channel recording mixer, a sampler, 3,000 sounds, a 128 long steps sequencer, lots of effects etc. ....... but can you end up with 24 bits...???? I did not understand this sound quality part of the manual.
Thanks for the video! Very helpful, but I have a question. I’m new to this device and I cannot figure out how to pick which tracks play in a section. For example, if I have a piano on the KICK track and a synth pad on the SNARE track, how do I get just the piano to play on section 1 and both the piano and synth pad to play simultaneously on section 2? I tried muting the SNARE track on section 1, but now it’s muted on both sections 1 & 2. Am I missing something here? Thanks, Josh
Hi, Josh. Great question! This one is a bit complex to get into in a comment, so feel free to give us a call and we can help you out. Thanks for reaching out! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
The mutes are global and not on a per track basis (hopefully in an update) but the work around I use is to press on copy and either copy entire tracks and clear the clips I'm not using for that section or copying individual clips. It's more steps than I would like but it gets the job done.
Hello, great question! You can either use an SD card to transfer the .wav files to your computer, or use the built-in USB interface. Let us know if you have any other questions. Thanks! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
Hi, Can i add external song..for exemple, enter song at my korg krome or drums's or m'y drumbrute or i Can only use songs of that verselab and of zencore. Because I'm singer and composer and i want to know if i buy it IS not to limited or if it's better try with mpc or maschine for an using during longtime???
Almost nailed it Roland... But that tiny screen that you guys put on all your boxes sucks bad. Menu diving in a dark room with a tiny screen doesn't work. No thanks.
Wait, so if you want to sample you can't have vocals as well? I was hoping this would be something to replace my SP-404SX but it seems to have tons of limitations as well.
I've seen one European sampler's work on it. There's a video (boombapartist, I believe). What he did sounded really good. He did then bring the result into the SP404. ruclips.net/video/0VjGnKRuUPg/видео.html
Nah. that's an error in the video. You can have both samples and vocals, they just use the same partition of memory...up to 12 minutes mono total. You can even internally resample and move vocal takes to sample pads and vice-versa.
Thanks for checking out the Roland MV-1 Verselab Music Workstation with us! Make sure you like, comment, and subscribe if you enjoyed this video👍
This has it all and great synth and drums it’s a steal for the price
The clocking of the MV-1 sounds superb.
Good video. I can't wait to get mine! I agree with the ending sentiments that this will fulfill a lot of needs for a lot of people. I plan on recording full songs as well as what I'm gonna call karaoke tracks. Some may be covers, but I also want to do full backing tracks for original songs with the drums, bass, instrumentation and backing vocals.
Looks like a great addition to any home studio
AWESOME. CONCISE PRESENTATION I AM GETTING THE MV-1 VERSE LAB. GOTTA HAVE IT. !!!
Waiting for my MV-1!
.......Bro.....I NEEEEEEED THAT SHIRT 😎
Sounds amazing
One of the best presentations of any kind. Clear, articulate and informative. Thanks
Built-in microphone is an interesting choice by Roland. Need to mention if it does midi clock sync as master or slave or both.
That's racist.
@Rattle Snake it is called CONTROL CHANGE in Midi
Wow
Very cool design & great sound! Awesome, Roland!
Still watching the video! I’ve been looking for this for a while🤔 need to know the PRICE!
700€
open a new tab and google it. were in 2021.
@Rattle Snake What I’m really saying is, I bet it’s expensive but he didn’t get that because some ppl are trying so hard to be negative
what is the best in this box then MC 707
Was this a repeat? Wasn't this uploaded a few weeks ago?
Question: when changing pattern mesurses , (lets say to 4) i don't see an indicator anywhere. How will I know when I'm nearing the end of the 4th mesure? Is it only by listening?
Thanks in advance
Hi, Ian! Thanks for your interest. There are four lights near the bottom left of the MV-1's surface, in between the start/stop button and the measure [] buttons. These are an indicator to show you which measure you are on. Hope this helps, and feel free to reach out to me directly if you have further questions!
Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com
You were wrong you can sample in sequence mode
Do you hate editing sample start and end points on the MV1. Even holding shift it takes forever to me. The sp404. Or MV 8000 is faster
@@Mikepepp2 it does and I still haven’t found out how to control the pitch…
An 8 channel recording mixer, a sampler, 3,000 sounds, a 128 long steps sequencer, lots of effects etc. ....... but can you end up with 24 bits...???? I did not understand this sound quality part of the manual.
All Roland gear sounds are top of the line
Thanks for the video! Very helpful, but I have a question. I’m new to this device and I cannot figure out how to pick which tracks play in a section. For example, if I have a piano on the KICK track and a synth pad on the SNARE track, how do I get just the piano to play on section 1 and both the piano and synth pad to play simultaneously on section 2? I tried muting the SNARE track on section 1, but now it’s muted on both sections 1 & 2. Am I missing something here?
Thanks,
Josh
Hi, Josh. Great question! This one is a bit complex to get into in a comment, so feel free to give us a call and we can help you out. Thanks for reaching out!
Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
The mutes are global and not on a per track basis (hopefully in an update) but the work around I use is to press on copy and either copy entire tracks and clear the clips I'm not using for that section or copying individual clips. It's more steps than I would like but it gets the job done.
Thanks Nick. It would definitely be nice to be able to mute any track per clip.
This unit has a very small screen and no WiFi capability nor any visual sampling capabilities , i guess I’m so accustomed to my AKAI Mpc products.
Nice demonstrative video and hopefully a new range , Peter from Roland Verselab Users Independent Group on Facebook.
How do I import my beats I make on the verse lab to pro tools?
Hello, great question! You can either use an SD card to transfer the .wav files to your computer, or use the built-in USB interface.
Let us know if you have any other questions. Thanks!
Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com
Hi, Can i add external song..for exemple, enter song at my korg krome or drums's or m'y drumbrute or i Can only use songs of that verselab and of zencore. Because I'm singer and composer and i want to know if i buy it IS not to limited or if it's better try with mpc or maschine for an using during longtime???
Use a daw, these machines are designed for crafting beats within the box, not for you to produce a whole album with a bunch of external instruments
OK, thanks for your answer. Finally i've bought the Verslab
@@egn2m540 good for you I’m happy your happy
Almost nailed it Roland... But that tiny screen that you guys put on all your boxes sucks bad. Menu diving in a dark room with a tiny screen doesn't work. No thanks.
Get some glasses nerd
Your making music in the dark?
I suppose this is what they call a black box?
Wait, so if you want to sample you can't have vocals as well? I was hoping this would be something to replace my SP-404SX but it seems to have tons of limitations as well.
I've seen one European sampler's work on it. There's a video (boombapartist, I believe). What he did sounded really good. He did then bring the result into the SP404. ruclips.net/video/0VjGnKRuUPg/видео.html
Nah. that's an error in the video. You can have both samples and vocals, they just use the same partition of memory...up to 12 minutes mono total. You can even internally resample and move vocal takes to sample pads and vice-versa.
I'm sorry but that beat sounds cheesy.
That beat was doodoo
I need more thug sounding overview but this is nice.
WTF, really. Be cool.