My Redwolf HP is a 65 FPE gun and it will say low power at about 184 bar, It has no regulator and no plenum so it has a very slight advantage drawing straight from the bottle, so this is in line with your power to bar pressure setting, same barrel length. I can get about 55 FPE at 170 bar in my Crown but It doesn't have the plenum size the Ghost has, also same barrel length. Looking forward to you getting a slug barrel, or a barrel with a faster twist rate. I just Ordered a Superior 1:24 twist rate. I'm hoping to turn it into an all-weight pellet gun with the ability to go up to 26 grain slugs. Tests are fun. I think it's the valve that struggles to be consistent at low reg pressures, I get better, or under 1 percent deviation at 170 bar, the high pressure really assists the closing of the valve. So I'm a fan of Higer reg pressures. As long as your pin style probe pushes your pellets past the transfer port your good, otherwise the high pressures will funk up the skirt, for this reason I only use the pellet probe in My crown, the pin probe sucked all around for everything in my FX.
@@Ayjay12345I know how to do it, but I have the strongest hammer spring in currently... Too much pressure on the internals will result in breakages. Plus reg at 190bar...
@@serhataliskan6262 The high power version is almost impossible to tune doen to 12fpe. Tuned it doen to 80bar on the reg, still shoots 18gr pellets at 880fps... 35fpe.
Your still suffering the effects of being brain washed using an FX Impact 😅😂, it will take you a while to adjust Your now shooting a rifle that’s mostly happy with what ever you want from it, it’s a rifle that just keeps on giving, unlike the Impact
Now that is just bating me into an argument... I still own my Impact and it is more adjustable than the Ghost. The Ghost is the better quality by a landslide... I enjoy both. Can't wait for the Ghost to bring out a proper slug barrel so I can put the 2 guns into a shootout.
@@AimSmallI follow your channel from a vey long time because I like your honesty and unbiased opinion every time you test all this high end airguns. I only do target shooting in my backyard at a distance between 25 and 75 yards but I like high ends airguns like this one. Currently I own a Kaliburgun Cricket II tactical .60 and Avenger wood stock both in .22 cal and just placed an order for the new Avenge-X airgun in .22 cal also because I consider this airguns the best low budget pcp that money can buy. I will like to see the performance of this particular Broko Ghost in .22 cal shooting the more lighter 18, and 15.89 grains pellets with the reg set to 140 bar tunned to shoot between 850 and 880 fps that from my own experience is the sweet spot that all this JSB and FX pellets like the most for maximum accuracy and precision and also increase the airgun efficiency and shoot count. If you perform this test with good results I will by this airgun to added to my other three airguns. Currently I use my avenger with the aftermarket carm magazines to increase his accuracy and the Arken SH4- FFP Gen II 4-16x50 scopes with 34 mm tubes with the Arken medium rings in all my airguns and planning to by the new lighter EPL-4-16x44 that comes with the high quality Japanese glass and 30 mm tube if I finally decide to buy this Broko ghost airgun.
@@raymondmorales8252 I am one step ahead sir. Did 50m testing with the Brocock shooting the 18gr and 21gr pellets, at 1030 fps. Next video will probably be the down tuned one, the only way I can get th Ghost to shoot 18 pellets at 870fps is to tune the regulator down to 75bar, and then the stand deviation is too high.
My Redwolf HP is a 65 FPE gun and it will say low power at about 184 bar, It has no regulator and no plenum so it has a very slight advantage drawing straight from the bottle, so this is in line with your power to bar pressure setting, same barrel length. I can get about 55 FPE at 170 bar in my Crown but It doesn't have the plenum size the Ghost has, also same barrel length. Looking forward to you getting a slug barrel, or a barrel with a faster twist rate. I just Ordered a Superior 1:24 twist rate. I'm hoping to turn it into an all-weight pellet gun with the ability to go up to 26 grain slugs. Tests are fun. I think it's the valve that struggles to be consistent at low reg pressures, I get better, or under 1 percent deviation at 170 bar, the high pressure really assists the closing of the valve. So I'm a fan of Higer reg pressures. As long as your pin style probe pushes your pellets past the transfer port your good, otherwise the high pressures will funk up the skirt, for this reason I only use the pellet probe in My crown, the pin probe sucked all around for everything in my FX.
Great feedback, thank you. I would love a Redwold but in 177 for HFT shooting.
Great video Gert
thank you
i also humbly eat my words about you being more accurate on old gun
very impressed with the consistency. What do Daystate say about maximum pressure re. warranty? I know FX say don't go over 150bar.
Thats weird from FX. To shoot the 40gr slugs you have to go to 180bar.... Saw nothing from BRK re max pressure, will try and get hold of Tony to ask.
Thanks for sharing
Waiting for jsb 18 grain testing on your brk
On it like a rash, going to do 75m and 100m. Initial testing was fantastic.
Aiwaa 👍👍
Dont you think a stronger hammer spring will give you more power?
The gun is maxed out at 65Fpe , a stronger hammer spring might push it a bit harder but not recommended.
Take your reg pressure up until you get a drop in velocity, then put in a stronger hammer spring.
@@Ayjay12345I know how to do it, but I have the strongest hammer spring in currently... Too much pressure on the internals will result in breakages. Plus reg at 190bar...
Is that a 600mm barrel?
@@Ayjay12345Yes. 23" = 583mm
👍👍👍🇸🇦🇸🇦🇸🇦🇸🇦👍👍👍
Hi did you test gamo rocket destroyer? .177
No 177 testing yet.
Can you test .177 brk ghost hp if you have?
I am waiting for a barrel kit, once I get it I will test.
@@AimSmall if you test hp barrel 12 fpe from full power
@@serhataliskan6262 The high power version is almost impossible to tune doen to 12fpe. Tuned it doen to 80bar on the reg, still shoots 18gr pellets at 880fps... 35fpe.
@@AimSmall no if you use .177
Your still suffering the effects of being brain washed using an FX Impact 😅😂, it will take you a while to adjust
Your now shooting a rifle that’s mostly happy with what ever you want from it, it’s a rifle that just keeps on giving, unlike the Impact
Now that is just bating me into an argument... I still own my Impact and it is more adjustable than the Ghost. The Ghost is the better quality by a landslide... I enjoy both. Can't wait for the Ghost to bring out a proper slug barrel so I can put the 2 guns into a shootout.
@@AimSmallits coming. Tell Steve to hurry up! 🤣🤣🤣🤣🤣
@@AimSmallI follow your channel from a vey long time because I like your honesty and unbiased opinion every time you test all this high end airguns. I only do target shooting in my backyard at a distance between 25 and 75 yards but I like high ends airguns like this one. Currently I own a Kaliburgun Cricket II tactical .60 and Avenger wood stock both in .22 cal and just placed an order for the new Avenge-X airgun in .22 cal also because I consider this airguns the best low budget pcp that money can buy. I will like to see the performance of this particular Broko Ghost in .22 cal shooting the more lighter 18, and 15.89 grains pellets with the reg set to 140 bar tunned to shoot between 850 and 880 fps that from my own experience is the sweet spot that all this JSB and FX pellets like the most for maximum accuracy and precision and also increase the airgun efficiency and shoot count. If you perform this test with good results I will by this airgun to added to my other three airguns. Currently I use my avenger with the aftermarket carm magazines to increase his accuracy and the Arken SH4- FFP Gen II 4-16x50 scopes with 34 mm tubes with the Arken medium rings in all my airguns and planning to by the new lighter EPL-4-16x44 that comes with the high quality Japanese glass and 30 mm tube if I finally decide to buy this Broko ghost airgun.
@@raymondmorales8252 I am one step ahead sir. Did 50m testing with the Brocock shooting the 18gr and 21gr pellets, at 1030 fps. Next video will probably be the down tuned one, the only way I can get th Ghost to shoot 18 pellets at 870fps is to tune the regulator down to 75bar, and then the stand deviation is too high.