Thank you so much for this video! I had the same problem with leaking as you showed and thanks to your guide I could easily take my machine apart. The break in the hose looked exactly like yours. Unfortunately I didn't have a spare but I measured and ordered some 3mm inner, 6mm outer diameter heat resistant silicon hose which I think should fit. Will update once I've installed. For those asking, T20 was what I used on the rear side screws.
I used tube with an inner diameter of 4mm and 7mm outer and it worked great. I think the original one was probably 8mm outer diameter but either one seems fine to me.
Thanks for this video. I have the same issue with water leaking from above the frother. Can you let me know the dimensions of the tubing required to replace the original part. Thanks so much.
measure the diamiter of the tube you are replacing, the total width of the pipe, and the thickness of the wall. Different versions have different size pipes
Thank you so much for this video! I had the same problem with leaking as you showed and thanks to your guide I could easily take my machine apart. The break in the hose looked exactly like yours. Unfortunately I didn't have a spare but I measured and ordered some 3mm inner, 6mm outer diameter heat resistant silicon hose which I think should fit. Will update once I've installed. For those asking, T20 was what I used on the rear side screws.
no probs
Turns out the hose I ordered was too small. Trying again with 4x7mm hose.
The 4mm inner, 7mm outer hose I found worked perfectly although I think the original one was probably 8mm outer.
Can you please tell me the size of the tube?
I used tube with an inner diameter of 4mm and 7mm outer and it worked great. I think the original one was probably 8mm outer diameter but either one seems fine to me.
Thanks for this video. I have the same issue with water leaking from above the frother. Can you let me know the dimensions of the tubing required to replace the original part. Thanks so much.
Can you please add pipe link where to buy this.
Any news on the link for the tube?
What is the size of the tubing??? Trying to find a replacement. Thanks
measure the diamiter of the tube you are replacing, the total width of the pipe, and the thickness of the wall. Different versions have different size pipes
Hi, what size were the torx screws for the back panel. Thankyou
T20 if memory serves
we had to use T20 in the end to open the back panel. Could anyone share a link where to purchase the tubing? what are they called? thanks a lot!
Silicone heat resistant tubing. You just measure the diameter of the pipe you have in total, then the thickness of the outer wall to order it
We used T20 in the end, any smaller didn't work
cheers
*promo sm* 😝