Marvin Sliding Glass Door Review
HTML-код
- Опубликовано: 22 авг 2024
- This is a sponsored video by our show partner Marvin Windows & Doors. We are reviewing a huge contemporary multi-slide door from www.marvin.com This 15’ wide by 10’ door is Aluminum clad on the outside and features a beautiful walnut interior. But, it’s the performance that really makes us like this door! Joining me is Corey Claunch, the owner of Architectural Impressions which is the Austin, TX dealer where I buy my Marvin & Integrity Windows and Doors.
www.AIAusitin.com
Follow them on Instagram - / architectural_impressions
/ risingerbuild
www.mattrising...
Hehe, we just snagged a similar MArvin slider from a showroom for a heck of a deal! 16ft wide double slider baby!
Good to see another Aggie on here!
Whoop!
Our ~20 year old Marvin slider needs weatherstripping replaced - to stop the rattling on the sliding section when the wind gusts
Hi Matt,
Following up on the previous comment, Can you provide some info on cost? I am in the design phase on a new home in the Chattanooga area And really like the idea of a large lift and slide.
Considering a 72x80 Marvin lift and slide came back at $16,000 I would take what you think it is an multiply it by 3
How tall is this patio door?
Damn they look good up close. I usually try cheaper options though, like Dako.
3:07 so satisfying
Lastime I hit the glass door of 4th college.
What is brittle?
4 stitches.Left leg.
4 or 5. Not clear. Left leg at tem-pu-rung lu-tut. Only 2 weeks-covered with tape.
My right hand was 1- month-plastered. So the mark of stitches is clear on the skin.
Do they make something like that for inside, like between rooms with a 6' opening
Greg Shaw you can absolutely buy doors like this for interior use. I’ve even seen some that recess into the walls, which look sweet!
Greg, these doors can absolutely be used in interior applications. In fact, the Marvin Ultimate Bi-Fold door is a really popular option for interiors: www.marvin.com/marvin/doors/scenic-bi-fold.
i didn't see how the door pockets. do two panels sit behind one when opened? do all three panels go into a pocket in the wall?
i understand about the gasket grip, just wondered about Water Draining during storm. Does threshold, or sill design have a drainage [door base under gasket] ?
Karen O most of the ones I have seen have weeping holds on the outside and essentially operate like a tray holding the door, and drain everything out. Haven’t seen the Marvin in person but I’ve seen a lot of similar.
happyhappyjoyjoy9999 - thank you this question thought of due to comments of Pinky movability and Remove Seals so you can. lol was that a joke ? silly guys - but i'm slow * peace
Matt my main interest with a slide door or french door is lock down security.
Are these doors tamper resistant?
Beautiful!
Can you show us how you installed it?
Also bring back the intro music.
Look fwd to every tue and fri!
Thanks!
intro music. yes
The Build Show Friday is about the Installation
We have the automatic multislide and the locking and unlocking mechanism is not user friendly.
cant hear you
low volume for sure
Hey Matt, have you worked with Panoramic Doors? If so, what you think of them?
How do you practically construct such wide door lintels to make them structurally sound.
nice door
Is there a price list? I'm interested but if it costs more than my car.
It does
Yea. Marvin makes a quality product. But they aren’t cheap doors.
About $1,000 per foot.
@jesse m: i find your figure hard to believe. $1,000 per foot is more than a basic nanawall folding glass wall system would cost.
Donald Lee it could cost more than some peoples homes. I worked on a project with a 3 panel lift and slide pocket door, it was at least 100k, just for the door. Marvin won't warranty it, unless it's was installed by a factory trained pro. That guy could live far away, and put themselves up in a hotel for the duration of the job, which you are paying for. That was 6 years ago.
how is this better than fleetwood. is this hurricane proof? also fleetwood bearings are huge and enormous and make them slide better.. can you compare the bearing of marving to fleetwood?
It would be like upgrading driving around in a Ferrari to a Bugatti… silly money either way
Another thing to keep in mind, the sill is not designed to manage water infiltration, i.e. you better have enough overhang or covered area to keep water away from the doors
Hey Matt big fan of you. I was wondering if you could do a video regarding the vinyl sliding door from Harvey Building Products. I’m having an issue with either my weep holes or my drainage channels. I have a leak in my door and for the life of me I cannot pinpoint exactly where it’s coming from. Please help me out.
I am having same issue since the storms
How do these doors fare on the blower door testing? are they compatible with a high performance house where any leakage is critical?
People who can afford a lot of glass in the house dont give a shit about an energy bill, different mindset
Neat!
Hey Matt or any other Contractor,
I am in the planning stage of building a home in Florida. I am looking for a good middle road 3-4 door slider that stacks. Any suggestions on products to check out.
Thanks, MIKE
Did you ever find the sliding door you were looking for?
It looks cool but I don't get the point of a door like this. When would you ever open it up? I don't want bugs or birds flying in my house
Is there a recommended lube for the door to help with moving easier ? Thanks.
august white lithium
Alamyst2011, Is there a clear version of the "white" lithium ? lol Thanks.
august it comes out transparent. it is more like a very fine chalk that does not attract dust. this leaves a nice film for the door to ride upon. Home depot carries it.
I had pure silicone lubricant come to mind but I'm thinking o-ring gaskets. Oops.
I tried to use graphite dust on my rollers on one of my doors, and that was fine... But moisture killed it. White lithium is the answer, and what we ultimately used.
Silly money. There are other options
You don’t buy a Ferrari because it’s practical or makes financial sense… yes there are other options
Out of curiosity how much would the model shown cost?
Too much to post on a RUclips comment... smh.
That door probably cost $20,000-$30,000. I sell doors.
@@angrywhistlingcock5209 try 40-50k not including installation and better hope there’s a Marvin certified person in your area if you want them to honor their warranty
@@KemikalReaktions lol
A door like that isn't for performance. It's for show. I'm sure it's a good door but if you are concerned about performance you wouldn't have that much glazing
the purpose for a lot of glazing is to let in more natural light. in modern windows, the "performance" is in the glazing, not in the frame. depending on your climate zone, if performance is what you want (and i assume that you mean "thermal performance") you would go with a triple glazed igu. however, i don't know if marvin makes this product available with a triple glazed igu, but there are companies that do offer similar products with a triple glazed igu.
@deeremeyer1: you are uninformed. glazing is a term which is very much in modern use. a multiple lite window system is called by the acronym: igu. guess what the "g" stands for? you've got it!
Tyler huff Performance is certainly a concern for those of us needing to keep out wind-driven rain
Just curious, why would Marvin promote this style of sliding door when they currently make a passive house style lift and slide? If the weatherstripping adds friction, (which you can logically conclude it does because he mentions it rolls smoother without it) then you can reasonably conclude the weatherstripping will be subject to wear and tear. The lift and slide seems to be a far better design in ease of use, performance, and longevity. Is there any advantage of this style over lift and slide besides maybe price?
i agree that the seal in this sliding door will degrade over time. i assume that the seal can be replaced when it wears out, though. wouldn't a lift and slide be quite a bit more expensive than the sliding door featured in this video?
Have you ever seen a passive house (Zola, Gaulhofer, Marvin makes one as well) lift and slide door in action? It doesn't require much force to lift the door onto the rollers, and when on the rollers there is less resistance when rolling. I'm not sure we're thinking about the same style of door, the brands I've mentioned don't focus on showrooms/commercial spaces as much as residential. Search lift and slide passive house in youtube and you'll see what I'm referring to. Also, I don't mean this to be snarky at all but just a heads up that I think you'd be a more effective communicator without the quotes and your audience would be more receptive if you stopped using them. Just a suggestion - not meant to insult.
@deeremeyer1: the amount of bluster in your comments far exceeds the amount of information contained in them. in fact, much of what you state is wrong. lift and slide doors are typically considerably more expensive than conventional sliding doors because the mechanism is more complex. that expense is undoubtedly the reason why you see a lot more conventional sliding doors than you do lift and slide doors.
a lift and slide door seals more tightly than a conventional sliding door. when the door un-lifts, it drops into the seal, so the weight of the door is used to achieve a tighter seal. when you are "sliding in the seal" as is the case with a conventional sliding door, you can't get air tightness, which is one of the requirements for energy efficiency. as jared czaia commented, there are passive house certified lift and slide doors (at least US certified, i don't know about germany).
Being that your in Texas, my main question is why in the world are using a frame rather than an aluminum frame. Wood is only going to swell and lose its squareness over time. I know this for fact. I just move out of Florida and trust me when I say there’s waaaaay more heat and humidity their than Texas. Oh yeah, when are you going to build a working man’s AFFORDABLE shipping container home?
If you watched the video all the way to the end you would have seen that the outside frame of the door is aluminum
watch the trailer on risinger's channel. he clearly states that he builds "architect driven" houses. that means that he builds high end houses. risinger is not a "production" builder who builds houses for the hoi poloi.
Don't waste your money, marvin offers a terrible product. From experience.
not an honest review if they give you $$
If you have to ask you can't afford it.
Colton Blumhagen thats a stupid a thing to say, your telling me you don’t calculate or manage your money. You have to know the cost and which brand name to trust and which one is worth it.
Does that apply to a night out with your mother? Asking for a friend.
Lol dp
terrible audio
too bad the hardware will corrode in less than 6 months - absolute shit - you have been warned.........I'm an owner, never again.......
Marvin warranty???