I've printed and used that carabiner for several years. Well designed and serves well. Like the video says, I wouldn't use it for climbing, but it holds my overexcited dog (dalmador) when she's clipped to my belt while out at the store, out fishing, etc. and they haven't broke yet. Thanks for mentioning this clip :)
I've already spent a lot of money on various weird hardware for my tarp setup for hammocking but seeing how they almost never need to cary any significant weight (at the very max one kilo maybe? I wouldn't ever bring a heavier tarp than that at least lol) these types of things could definitely be 3d printed for super cheap. Or tools for making whoopie slings and the like would also be a good candidate. Hooks to hang your stuff onto the hammock ridgeline maybe? Ultralight telescoping pole for the camera setup and maybe for tarp/tents too? A clip on stand/handle for a headlight could be kinda useful in some situations. Various plastic parts on backpacks, tents, tarps etc could be useful if they break
Your channel is great. I like getting my gear reviewed by an engineer/student. My friend recruited me to hike 14 days on the AT in the Shenandoah Mountains. I'm 70 and never overnight hiked before. We go in September 2021. YIKES. Actually, I'm in good shape, training for the hike, and am excited about it.
Please make a note on this video that 3D printed parts that come in contact with drinking water or food require a LOT of research to ensure it's food safe. Brass nozzles can contain lead, filaments that sound food safe may contain other unsafe materials, etc. Unless you REALLY know what's in the filament and everything that will contact it on the way to the bed (and probably including the bed), I'd consider it unsafe for use around food/water.
You are correct. ABS is FDA food safe, however the problem with 3D prints are the impossible to clean crevices between layers, which would be impossible to truly clean.
Check out some of the Carbon Fiber filament specs. I have a friend that has used that filament for machinery prototyping that ended up last for years of continual use.
Thanks for this. I’ve had similar thoughts and designed and printed a two part nozzle adaptor to make a DIY pump sack for an inflatable pad. It fits to a large tear proof mailing bag, which in turn can double as a pack / pannier liner. Total cost is sub $2, and if the bag tears, the adaptor can just be unscrewed for reuse on another bag.
I want some 'duck feet ' type chair feet. Last summer my chair zero sunk in the mud in the Adirondack mtns. Needed some way to spread out the force on the leg bottoms. I Don't have the fabric sheet bottom
I'm currently 3d printing a cradle system for a bikepacking setup. The most useful things i can see being 3d printed for backpacking are stuff like custom strap buckles, snaps, and other types of things allowing one to make their own gear. 3d printed stuff in itself isn't as useful as say printing parts to make other things, or make them better. I can see ultralightweight tarp/backpack combos using 3d printed hardware like grommets and stuff you can't buy off the shelf. I COULD 3d print a bunch of gear, but the thing is i just don't need much stuff, often i don't even have a backpack, just a hip pack with a hammock. If i could 3d print a tiny folding rocket stove that won't melt i'd do it, but for now i'm printing brackets and such to hold bikepacking gear.
I've had the DDF3D Origami Carabiner on my bag for the better part of a decade now and it has dutifully served carrying a liter or two of water bottles on a regular basis. I made it out of PETG many moons ago. The only appreciable wear is that the gate has a bit less spring in it, but if it ever fails, I can just print a replacement.
Oh man! I love the Bottle Clip. Fits great on my BeFree. I used the 2nd version with 25% fill. 12gr. Works great, but a little sharp on the edges. Wish it was more rounded on the end that goes into you shoulder strap. Over all it's great!
I don't see any models out there yet, but I could probably design one pretty easily. My only concern is that the plastic stand would be much closer to the heat with an alcohol stove, but that might be something to test out sometime soon!
I'm waiting for libraries to reopen here in Finland because I found an adapter for my x klymit airpad which I'd like to try out.. a simple bag and I'll finally have a pump for it!
Possible to send me the file for this Katadyn to SMART bottle connector piece you printed? I have access to a printer and CAD to modify and make it screw on with no leaks.
It would be cool if it could be shortened just a bit too. I'd buy that adapter. I like the squeeze besides the fact that you have to squeeze it. Gonna switch to the Be Free.
3D printing is THE game changer in just about every area imaginable. From homes to basic connectors and/or replacement parts forjust about anything as you featured. I can't wait to see and design more products that will improve not only hiking and backpacking, but life in general. Thanks for the vid, much appreciated!
Haha, good thought! These prints used a standard filament, but food grade filament is available, so thats what I'd use if I was planning to take the filter adapter backpacking.
Any interest in seeing more about my recent gear storage updates?
Absolutely!
Yes!!
Yes please
5:40 You are telling me you don't get a plastic cap for them from the factory?? I have been buying fancy gas cans???? WHAAAA??
I've printed and used that carabiner for several years. Well designed and serves well. Like the video says, I wouldn't use it for climbing, but it holds my overexcited dog (dalmador) when she's clipped to my belt while out at the store, out fishing, etc. and they haven't broke yet. Thanks for mentioning this clip :)
Lol I’ve asked Reddit what I should 3D print for camping or backpacking. Not many responses. Glad to see someone else had the same idea.
Haha, yeah I guess backpackers that also 3D print puts us in a pretty small niche.
This will be a game changer pretty soon, once everything catches up
I've already spent a lot of money on various weird hardware for my tarp setup for hammocking but seeing how they almost never need to cary any significant weight (at the very max one kilo maybe? I wouldn't ever bring a heavier tarp than that at least lol) these types of things could definitely be 3d printed for super cheap. Or tools for making whoopie slings and the like would also be a good candidate. Hooks to hang your stuff onto the hammock ridgeline maybe? Ultralight telescoping pole for the camera setup and maybe for tarp/tents too? A clip on stand/handle for a headlight could be kinda useful in some situations. Various plastic parts on backpacks, tents, tarps etc could be useful if they break
Your channel is great. I like getting my gear reviewed by an engineer/student. My friend recruited me to hike 14 days on the AT in the Shenandoah Mountains. I'm 70 and never overnight hiked before. We go in September 2021. YIKES. Actually, I'm in good shape, training for the hike, and am excited about it.
I recently came to the same conclusion when trying to 3d print some gear for backpacking. We just don't use much plastic items in backpacking.
Please make a note on this video that 3D printed parts that come in contact with drinking water or food require a LOT of research to ensure it's food safe. Brass nozzles can contain lead, filaments that sound food safe may contain other unsafe materials, etc. Unless you REALLY know what's in the filament and everything that will contact it on the way to the bed (and probably including the bed), I'd consider it unsafe for use around food/water.
You are correct. ABS is FDA food safe, however the problem with 3D prints are the impossible to clean crevices between layers, which would be impossible to truly clean.
Check out some of the Carbon Fiber filament specs. I have a friend that has used that filament for machinery prototyping that ended up last for years of continual use.
I'll have to check that out. Thanks!
Thanks for this. I’ve had similar thoughts and designed and printed a two part nozzle adaptor to make a DIY pump sack for an inflatable pad. It fits to a large tear proof mailing bag, which in turn can double as a pack / pannier liner. Total cost is sub $2, and if the bag tears, the adaptor can just be unscrewed for reuse on another bag.
I printed the stove legs with glow in the dark filament and love them.
Hmm, chair feet. That's useful.
I want some 'duck feet ' type chair feet. Last summer my chair zero sunk in the mud in the Adirondack mtns. Needed some way to spread out the force on the leg bottoms. I Don't have the fabric sheet bottom
I'm currently 3d printing a cradle system for a bikepacking setup. The most useful things i can see being 3d printed for backpacking are stuff like custom strap buckles, snaps, and other types of things allowing one to make their own gear. 3d printed stuff in itself isn't as useful as say printing parts to make other things, or make them better. I can see ultralightweight tarp/backpack combos using 3d printed hardware like grommets and stuff you can't buy off the shelf.
I COULD 3d print a bunch of gear, but the thing is i just don't need much stuff, often i don't even have a backpack, just a hip pack with a hammock. If i could 3d print a tiny folding rocket stove that won't melt i'd do it, but for now i'm printing brackets and such to hold bikepacking gear.
Congrats on nearing the end of your schooling!! This is a super Kool idea, 3D printing is awesome
Thanks!
I've had the DDF3D Origami Carabiner on my bag for the better part of a decade now and it has dutifully served carrying a liter or two of water bottles on a regular basis. I made it out of PETG many moons ago. The only appreciable wear is that the gate has a bit less spring in it, but if it ever fails, I can just print a replacement.
Oh man! I love the Bottle Clip. Fits great on my BeFree. I used the 2nd version with 25% fill. 12gr. Works great, but a little sharp on the edges. Wish it was more rounded on the end that goes into you shoulder strap. Over all it's great!
Filament testing video for thise just getting back into school
I had my son 3D print an adapter for the Exped inflation bag. to attach to the new TheraRest sleeping pads. I can inflate the pads in 3-4 puffs.
Is there a 3D model for a "coke" can alcohol stove tripod-type stand?
I don't see any models out there yet, but I could probably design one pretty easily. My only concern is that the plastic stand would be much closer to the heat with an alcohol stove, but that might be something to test out sometime soon!
I would love to hear more on your gear storage. 3-D printing it’s cool and I would love to hear about tec stuff. 👍
Great video,. I never thought of 3D printing film gear accessories. I should have asked Santa for a 3D printer for Christmas!
Fair warning, the 3D printing rabbit hole is quite deep. There’s a good bit available for filmmaking though!
I was actually just about to print a bidet to try out.
I'm waiting for libraries to reopen here in Finland because I found an adapter for my x klymit airpad which I'd like to try out.. a simple bag and I'll finally have a pump for it!
LOL. The Schills would appreciate that chair bottle holder. I think it looks great. 😁
Great work. Good thinking. When you said leaked like a screen door on a submarine, I had to give a like 👍
😆😆
I do like the stove stand and the inreach clip 👍🏼. Going to have to give those a try 😎
Let me know what you think about the InReach clip!
@@GearTestTV will do!
How do make these prints food grade safe? I thought the materials like PLA and PETG are toxic
also Tinkercad is a few 3D Cad program.
Possible to send me the file for this Katadyn to SMART bottle connector piece you printed? I have access to a printer and CAD to modify and make it screw on with no leaks.
Excellent! Let me know what you come up with. www.thingiverse.com/thing:3566270
It would be cool if it could be shortened just a bit too. I'd buy that adapter. I like the squeeze besides the fact that you have to squeeze it. Gonna switch to the Be Free.
Carbon fiber nylon. Look into it
3D printing is THE game changer in just about every area imaginable. From homes to basic connectors and/or replacement parts forjust about anything as you featured. I can't wait to see and design more products that will improve not only hiking and backpacking, but life in general. Thanks for the vid, much appreciated!
08:12
Congrats on graduating
thx very much !
Interesting stuff!
Very helpful video
Thanks for watching!
I’ve been wanting to open up a outdoor business and I live in ga. We should talk lol
great video
"Gram Weenies" lol
Came to the comments for this reaction haha
is it food safe though lol
Haha, good thought! These prints used a standard filament, but food grade filament is available, so thats what I'd use if I was planning to take the filter adapter backpacking.
@@GearTestTV tbh imgonna have a look on thingiverse and see what camping mods I could print
Hell yes
Supwell
Awesome 😍💋 💝💖♥️❤️
great stuff!
Thanks Ed!
Congrats on graduating