Hi. Please can you help me, i have a problem with the flow meter: the black ball is blocked at the top and don't move up and down when turning the flow button.
My Philips everflo has a cover at the back side where it sucks the air in, so even if machine is kept near wall it can take air. But my machine seems to be heating a lot (no alarm tho), should i remove that cover?
I am using the same model, that is a mandatory cover on intake , by keeping the cover on,it will reduce the sound and also stop dust particles to enter in system directly. Keeping the cover always on doesn't heat the machine. The machine need at least 1 feet distance front and back with or without cover on. Hope it is helpful.
Mine didn't come with a cover or the water cup but the black velcro is there to hold the cup/cannister in place. I've been running it without these. It doesn't hurt the machine does it?@techgadgets3714
If the resviour is empty, will the ball float? My dad's oxygen level was very low at a nursing home and I was wondering that could have caused it. Thank you.
I use mine outside at my home sometimes instead of my portable concentrator. Keep it out of sun, rain, high temps, etc. I try not to on high pollen days either, too much dust, etc., so I check outdoor air quality and plan ahead when I can. If I have to I just change the internal intake filter more often.
My yellow light keeps coming on. I changed the filter. I can turn it off and the light is off for about ½ hour or less and it's back on. I have taken the filter cover and there was a whole day without a problem so I was thinking, could it be the aftermarket filter. Right now the yellow light is on. No kinks in the hose, no blockage near the machine.
My mom just got this model from a different concentrator. It is very loud. Not the running of the machine itself but the puffing of air every few seconds. Is that normal? Or should the puff of air be quiet as well?
my wife is on the same machine that you a showing in your video. we moved to N.C, and a friend gave us a concentrator that is again the same, respirontics evenflo op1. i moved for NV on 3.8.23 so we dont have a pulmonologist yet. however my wifes medicaid has not kicked in yet here in NC. Back to the problem, the machine has power, runs for a minute and starts to put off a sweet smell. then i get a steady red alarm. Based on that can you tell me whats wrong? contact me please. you should know how to find an email on here. if not leave a messege please. i need some help!!! My wife had pneumococcal pneumonia and viral pneumonia at the same time the year before covid. she has dead spots in her lungs.(scarred tissue actually) thank you for your time.
Hello! I have a problem with a new oxygen concentrator, the problem is that the oxygen ball doesn't go up at all. What can be the cause? Can you please help me with an answer/solution? Thank you!
I had this problem. We took it apart. Turns out the plastic fitting had broken off. We went to Home Depot and got a new fitting and replaced the broken one.
@@elainemayfield5850 oh well, meanwhile i fix it myself. In my case, it was broken an inside cable and i glued it with a plastic soldering solution :))
That alarm always serves as a "problem". If the maching isn't working properly, it should alarm. If the alarm is disconnected, you would never hear it then.
Check your oxygen pipes is there any blocking or not. And second there might be low voltage coming from the electrical box. If not keep the Ball above 1 lpm or below 5 lpm this should solve. Still you face issue then it is machine problem.
There is not a "foam filter" on that model for you to clean and/or replace. However, there is a filter on the inside of the concentrator that the company replaces annually.
Hi there, sorry for the delayed response as we weren’t able to see your comment til now. Feel free to call our customer service line at 714-575-8901 with any future questions.
Thank you, I'm a newbie.
Thank you you answered my question I truly appreciate your channel Happy New Year’s 🎊🎆🥳
Very informative 🙏 sir
I have that machine, but mine makes a banging pounding sound. Is this normal??
Can you show how to remove and clean the filter on this particular concentrator please
Hi. Please can you help me, i have a problem with the flow meter: the black ball is blocked at the top and don't move up and down when turning the flow button.
Hi there! Feel free to call our customer service line at 714-575-8901 and they can answer any questions you have!
My Philips everflo has a cover at the back side where it sucks the air in, so even if machine is kept near wall it can take air. But my machine seems to be heating a lot (no alarm tho), should i remove that cover?
I am using the same model, that is a mandatory cover on intake , by keeping the cover on,it will reduce the sound and also stop dust particles to enter in system directly. Keeping the cover always on doesn't heat the machine. The machine need at least 1 feet distance front and back with or without cover on. Hope it is helpful.
Is it loud?
Is it loud?
Mine didn't come with a cover or the water cup but the black velcro is there to hold the cup/cannister in place. I've been running it without these. It doesn't hurt the machine does it?@techgadgets3714
If the resviour is empty, will the ball float? My dad's oxygen level was very low at a nursing home and I was wondering that could have caused it. Thank you.
Can these be used outside like on a patio
I use mine outside at my home sometimes instead of my portable concentrator. Keep it out of sun, rain, high temps, etc. I try not to on high pollen days either, too much dust, etc., so I check outdoor air quality and plan ahead when I can. If I have to I just change the internal intake filter more often.
how long can I run oxygen concentrator continuously?
300 hours😂
My yellow light keeps coming on. I changed the filter. I can turn it off and the light is off for about ½ hour or less and it's back on. I have taken the filter cover and there was a whole day without a problem so I was thinking, could it be the aftermarket filter. Right now the yellow light is on. No kinks in the hose, no blockage near the machine.
Same here
It’s low oxygen. It needs to be replaced
My oxygen concentrator is making an odd noise. It sounds like a low rumble as it idles. What could this be
My mom just got this model from a different concentrator. It is very loud. Not the running of the machine itself but the puffing of air every few seconds. Is that normal? Or should the puff of air be quiet as well?
Normal
my wife is on the same machine that you a showing in your video. we moved to N.C, and a friend gave us a concentrator that is again the same, respirontics evenflo op1. i moved for NV on 3.8.23 so we dont have a pulmonologist yet. however my wifes medicaid has not kicked in yet here in NC. Back to the problem, the machine has power, runs for a minute and starts to put off a sweet smell. then i get a steady red alarm. Based on that can you tell me whats wrong? contact me please. you should know how to find an email on here. if not leave a messege please. i need some help!!! My wife had pneumococcal pneumonia and viral pneumonia at the same time the year before covid. she has dead spots in her lungs.(scarred tissue actually) thank you for your time.
How to tell amount of gas left
Hello!
I have a problem with a new oxygen concentrator, the problem is that the oxygen ball doesn't go up at all. What can be the cause? Can you please help me with an answer/solution?
Thank you!
I had this problem. We took it apart. Turns out the plastic fitting had broken off. We went to Home Depot and got a new fitting and replaced the broken one.
@@elainemayfield5850 oh well, meanwhile i fix it myself. In my case, it was broken an inside cable and i glued it with a plastic soldering solution :))
What could be wrong if the concentrator is making a buzzing sound?
Can the warning noise be turned off for just turning on the machine ?
That alarm always serves as a "problem". If the maching isn't working properly, it should alarm. If the alarm is disconnected, you would never hear it then.
My machine shows red lite kindly tell what can I do
Hi there! Feel free to call our customer service line at 714-575-8901 and they will answer any question you may have !
Our oxygen concentrator is continuously beeping with low pressure light on. Any idea why it happens
Same problem. Don’t know how to solve it.
Might be your tubing, double check those.
same issue
Check your oxygen pipes is there any blocking or not. And second there might be low voltage coming from the electrical box. If not keep the Ball above 1 lpm or below 5 lpm this should solve. Still you face issue then it is machine problem.
Hi there! Feel free to call our customer service line at 714-575-8901 and they can answer any questions for you!
I want to learn how to repair 5 liter and 10 liter oc
Please zoom in on what your talking about so I can see it & so I can hear you. You also did not show how to change the filter.
There is not a "foam filter" on that model for you to clean and/or replace. However, there is a filter on the inside of the concentrator that the company replaces annually.
meter bol was not working
help 😭
i cant hear pumping sounds
Hi there, sorry for the delayed response as we weren’t able to see your comment til now. Feel free to call our customer service line at 714-575-8901 with any future questions.
Do you deliver internationally?
We do not.
I have a problem, it's not throwing out enough oxygen
Use between 1lpm to 4 lpm only above 4 ypu dont get good concentration of oxyge . For good oxygen quality put the ball at 3 to 3.5.
Hi there! Feel free to call our customer service line at 714-575-8901 with any questions and they can answer for you!
Sir what is the voltage required for concentrator
1kw
220vac
Green light is on... Beep Beep Beep ?
An intermittant beep beep beep means that there isn't power. Make sure it's plugged in.
you really need to fix your audio- its a mess I probably won't subscribe just for that