I haven't noticed any extra noise in the fx loop. If you were to experience this, you could also leverage a noise gate block, but I really don't think you'll have to.
How would you connect a victory kraken v4 preamp and an h90 eventide? first goes the kraken towards the h90 or how would it connect, greetings, very good videos
Thank you for the kind words! This depends a bit on how you would like your signal chain to be routed. For the Kraken pre-amp, would you prefer it to behave as a pre-amp and physically use the pedal? If you do, I would consider running your guitar input to the kraken, then the output to the input of the QC. You could also consider capturing the kraken v4, and placing it at the beginning of the input chain on the grid. For the h90, I am going to assume you would like to use this after your amp block. If so, I would use one of the fx loops, and drop the fx loop block towards the end of your signal chain on the grid. Obviously, you are wanting to get creative and use the h90 before and/or after, since you have two simultaneous processors, you could consider utilizing both fx loops with the input/output on the pedal and place the fx loop blocks both before and after the amp/cab blocks. I hope this helps and let me know if this doesn't make sense.
@@GaryWrightMusic If I want to run the kraken as a preamp to modify it. I was complicated by the same fx loop that the kraken has Now I was looking at the h90 more for a multi of delays and ambient reverbs that's why I thought of running it after the amplifier block
how does the QC handle noise in the FX Loop? do you find that there's some extra noise from OD/Distortion pedals in the loop?
I haven't noticed any extra noise in the fx loop. If you were to experience this, you could also leverage a noise gate block, but I really don't think you'll have to.
How would you connect a victory kraken v4 preamp and an h90 eventide? first goes the kraken towards the h90 or how would it connect, greetings, very good videos
Thank you for the kind words!
This depends a bit on how you would like your signal chain to be routed. For the Kraken pre-amp, would you prefer it to behave as a pre-amp and physically use the pedal? If you do, I would consider running your guitar input to the kraken, then the output to the input of the QC. You could also consider capturing the kraken v4, and placing it at the beginning of the input chain on the grid.
For the h90, I am going to assume you would like to use this after your amp block. If so, I would use one of the fx loops, and drop the fx loop block towards the end of your signal chain on the grid. Obviously, you are wanting to get creative and use the h90 before and/or after, since you have two simultaneous processors, you could consider utilizing both fx loops with the input/output on the pedal and place the fx loop blocks both before and after the amp/cab blocks.
I hope this helps and let me know if this doesn't make sense.
@@GaryWrightMusic If I want to run the kraken as a preamp to modify it. I was complicated by the same fx loop that the kraken has
Now I was looking at the h90 more for a multi of delays and ambient reverbs that's why I thought of running it after the amplifier block
Thank you very much for responding and I'm still watching your videos.