That cleared up a lot for me. I just started to use Panoptix and couldn't figure out why the transducer was shooting straight ahead but the small icon in the upper right showed it was shooting to the back of the boat.
Good video but AHRS will wonder setting still. In order to indicate correctly sitting still, you will need a heading sensor for the maps. This not my opinion but straight from the Garmin Help site.
Sir this is an EXCELLENT video!! Question : Is it necessary to have any type of heading sensor to calibrate the compass & get the boat Icon onto the screen??
Thanks for the video i am using a stand alone pole for transducer and im able to calibrate but when finished the boat icon direction on screen does not match with transducer direction not sure what im doing wrong. Thanks for your help
Great video, I followed the steps and the following popped up on the screen (Before you can calibrate the transducer, you must deploy the transducer in the correct orientation.) have you experienced this?
I tried calibrating my compass and two things happened that I haven't seen in any presentation on this topic: First, the icon that appeared was not a boat but a circle with an "N" at the top of it. Second, when the trolling motor is pointed straight ahead the beam is shooting 90 degrees to the port side. Any idea what's going on or how I can fix this?
Man!!! This is really cool! I have a GPS unit so I don't have mapping without buying the card but this is definitely something to think about! Sharing it with all my buddies for sure! Will it help with Ghost tree stitching of that data any by chance?? Thanks!!!
Thanks for the video. I have a pole mount transducer. Should the transducer be pointed in any particular area (front, 90 degrees off bow, etc) when rotating the boat to calibrate?
I currently have a Garmin live scope LVS 34 with a GLS 10 black box on a 93SV screen. For some reason I cannot get the cone to show in the direction after I have calibrated the transducer and I am having a good GPS connection. Any advice in settings on this? I would greatly appreciate it. Thank you.
For indicator on your screen will not always show the direction of the transducer. There's a couple different settings for how that is displayed. I prefer having the map setting to north up which tends to be more accurate to show the direction the panoptics is pointing on the map. As far as the display in the upper right hand corner on the pan optics screen, I've never had Good luck with that.
Great information, I just celebrated my system just like you suggested. The problem that I am incourting is that the cone disappears on the maps . I go back to celebrate it however the system says that its successfully calibrated. AHRS is turned on. Any suggestions on what the issues could be? Thanks
Anytime the cone disappears that is because the compass has become uncalibrated. Recalibrate the compass. There's a problem with that happening when you switch from perspective mode back to forward or downmode.
Did this unit have a steady cast heading sensor ? Curious cause the boat icon beam won’t match using AHRS alone to direction of the LVS32 transducer , when not moving /stationary
Finely got a successful calibration after many failed tries or getting a message "must be in forward perspective" many times, even when the transducer is mounted in forward and forward or auto is selected in menu. After finally getting successful calibration worked great for a few days. Then suddenly the screen picture would start to swing as though it was hanging on a pendulum and the pointer extending from the boat icon would rotate quickly and constantly. Turning AHRS to off would bring back normal screen but, of course, no boat icon. Then eventually when turning AHRS back on would get a screen with multiple quarter circles radiating away from the 0 point. Checked voltage from all power, all good (new batteries). Checked all connections, all seem to be good. Please help!
@@818OutdoorsHave never used perspective view. Sounds like you are telling me I have lost my calibration. I will recalibrate. For some reason it is an arduous process, that is why I have not done it again. Thank you for the quick reply. It is greatly appreciated.
Jason, I need your help please!! When I set a waypoint using Livescope it drops the waypoint beneath my boat. How can I fix this?? I appreciate it very much, Thank you!
Just subscribed...Setting up new rig..have 2 126s up front and 2 at console..should I calibrate the bow units individually..any reason to calibrate console units..Do I turn the boat with big motor...or trolling motor Thx Jack B
The calibration is in the gls10 livescope module. Once the calibration is done all units will show calibrated in the livescope. Just turn the trolling motor if it has the capability to rotate 1.5 times.
Having issues after calibrating my compass, the cone direction is pointing in the opposite direction of where my transducer is pointing. Do you know how to fix this issue.
Great info. I’m about to drop the hammer on buying a Livescope. I’ve got a boat but I’m going the portable route with mine. What’s your price on a 1222 set up like I see in the background?
Jason, I'm trying to figure out if there's any advantage in sonar response time between the higher end and entry level units running livescope. Do you know if the the GPSMAP units are more real-time vs the other units garmin offers or is the minute latency the same no matter what head unit you use with livescope? I have not seen or read any info on this scenario yet and would be nice to see if you can shed some light on it. Thanks!
The GPS map isn't exactly higher end. The 8600 specifically is the high end. The biggest difference is sonar wattage power capabilities and processing power. For just livescope there's not a big advantage over 106 or 126.
any idea why I keep getting a magnetic enviroment reading of 10 or so and fail I do have a transducer cable running with livescope cable on trolling motor. with everything off except livescope I still have this problem any advice is appreciated
Hey Jason. I calibrated my unit. Was a success. However on the maps the compass is off 180 degrees. How do you fix that? The compass shows correctly to the right and the left left off of the front of the boat. The boat is pointing to the south physically so on the maps the roads and lakes etc are off 180°. Any suggestions on how to correct?
Check your transducer to make sure it's mounted in the proper orientation. The word Garmin should be level in the cable should be to the rear. Also you have to understand that only when the boat is moving will the map orientate to the proper direction with the boat icon.
I turn AHRS off and manually select forward. Obviously no calibration. If I turn AHRS ON and properly calibrate, Will the LS image be any different? Or is the only difference, the things you showed. Ty
I have a compass that shows the cone in relation to north, it doesnt have a boat icon in the right corner of my 93sv with a lvs32 and gls10. I can't figure this out any ideas? Thank you!
@@818Outdoors well that's lame! Why would anyone care where the cone is in relation to north instead of the real time location of where its pointing. Garmin is trippin on this one. Thanks for the response!!
@@SeeLifeBro because in order to track where it's pointing when the boat is not moving, you would need a steady cast sensor. Otherwise the GPS boat orientation is achieved with forward or backwards both movement. When you're in one place, the charplotter does not know what is the front and back of your boat
I have calibrated the compass but the beam doesn't show up on the fishing chart (software all up to date)...is there a setting to turn this on (the AHRS in turned on)? Cheers
I’m new to Livescope. I am installing a Garmin Livescope 34 plus with a 1022 chart plotter. Do I need better maps to do what you are doing? What do you recommend? This is a game changer IMO. Thanks!
from what I've seen it's definitely not as good as livescope. Doesn't seem like it has quite the features and definitely does not have the beam splicing right.
@@daviddincler7494 You're better off going into the livescope screen and using the cursor to pause crosshairs on the brush pile, then mark that location. That will drop away point on the actual brush pile. Make sure you have your compass calibrated.
@@818Outdoors The situation I get with AHRS on is multiple concentric rings radiating from 0 like Saturn rings. Refuses to calibrate no matter what. Have latest software on sd sent by Garmin. 13.8v from LiFePo4 directly to GLS10 supplied power cord. If I want livescope I cannot have it on!
My compass won't stay calibrated for some reason, anyone else have that problem? I am running a nmea 2000 network with a steady cast heading sensor also.
Mine worked great for a year or so. Then would not stay calibrated for several months. Now will not calibrate at all. Keep getting message needs "proper orientation" Cant find anywhere where Garmin defines "proper Orientation". I assume its forward. Still get same message. Thought it may be a low voltage problem. LiFePo4 reads 13.8v dedicated to GLS10. Tried other good, new batteries. No success. I gave up and went fishing instead of messing with electronics. Wish Garmin would help me.
@@brettwren7824 I have the same issue, 90 deg off. Garmin just tells me to put it in the water and re-calibrate. Tried like 10X. No luck still off by 90. I wish I could get it to work.
@@JigglinGem are you saying the yellow cone is pointing 90° when your trolling motor head is pointing straight ahead? I mean the cone is always 90° off of the direction your trolling motor is pointing.
not that often, when your little boat icon disappears recalibrate. If you change from perspective mode to forward mode you'll most likely need to recalibrate
@@818Outdoors thanks man, I just installed mine haven't even put it on the water yet so I'm trying to get as much information as I possibly, and see what I bought is totally capable of. I only got the livescope option on the transducer that's it.
Question Poster.. Good video. Are you an Aquarius? 🤣 Wierd question I know. But this is just some Aquarius stuff to me to be fascinated by something that is apart of something others over look. I'm doing this tonight.😁👍👍
@@818Outdoors 🤣😆😂 I was close I knew you had to be near!! Hilarious. This made my day. You got AQUARIUS traits Bro.🤣😂 All the best to you. Stay True to Yourself!! 👍👍👍👍
First time anyone has given a compelling reason to use AHRS. Thanks for the education!!!
Jason Young - One of the ultimates on RUclips! ANOTHER great video! Thank you for your time & effort!
That cleared up a lot for me. I just started to use Panoptix and couldn't figure out why the transducer was shooting straight ahead but the small icon in the upper right showed it was shooting to the back of the boat.
So you had it backwards?
Great feature that I have never used. Thanks, KY
Thanks for the link from the Facebook group.
Awesome video and I can see how this will work great for ice fishing.
Gave me a great idea. I don't have spot lock so I could pin the tree I caught the fish on.
My thoughts too!
What is spot lock?
Good video but AHRS will wonder setting still. In order to indicate correctly sitting still, you will need a heading sensor for the maps. This not my opinion but straight from the Garmin Help site.
Nice video, thanks for sharing! - Crappie Kirby
Outstanding!! Never knew. Will calibrate next time I'm out. Thank u
That's pretty awesome, I still haven't even put my shuttle together but I've been picking up tips as I go.
I feel like I’m the reason for this video. 😂 It did help, still fighting the dead spot in shallow water.
Same
Excellent video, thanks mate.
Sir this is an EXCELLENT video!! Question : Is it necessary to have any type of heading sensor to calibrate the compass & get the boat Icon onto the screen??
Wow. Love this. Thanks
Very informative.
Thank you.
Great Video, great shirt!!!! lol.... Love it!
Great video! Definitely going to help me stay on those fish.
Great tips thank you for sharing!
Awesome tip. Thanks a lot.
Great information. Thanks.
GREAT INFORMATION! THANK YA! GO FISH🎣
"Hold your pole" Holding!
Thanks for the video a gray help
Good video, nice job
Thanks so much 👍🏽
Coooool. Thanks dude!
Great Stuff!!
Thanks for the video i am using a stand alone pole for transducer and im able to calibrate but when finished the boat icon direction on screen does not match with transducer direction not sure what im doing wrong. Thanks for your help
Got I got the problem too
Got same problem too tried many times just can’t seem to get it would be great if it did.
Same problem
I have a Garmin 93sv UHD and I can`t find the AHRS settings under the sonar set up menu.
Awesome
Can I see the beam on another garmin unit
Great video, I followed the steps and the following popped up on the screen (Before you can calibrate the transducer, you must deploy the transducer in the correct orientation.) have you experienced this?
What I have notice when using the beam at my wp the tree is not there so how do I make my wp better
I tried calibrating my compass and two things happened that I haven't seen in any presentation on this topic: First, the icon that appeared was not a boat but a circle with an "N" at the top of it. Second, when the trolling motor is pointed straight ahead the beam is shooting 90 degrees to the port side. Any idea what's going on or how I can fix this?
Great video, can you damage the transducer running it out of the water? If not I plan to calibrate mine tonight in the garage!
Man!!! This is really cool! I have a GPS unit so I don't have mapping without buying the card but this is definitely something to think about! Sharing it with all my buddies for sure! Will it help with Ghost tree stitching of that data any by chance?? Thanks!!!
You will probably still have the base map just not the topo. The compass and Panoptix Area is in the LiveScope...not the chartplotter.
@@818Outdoors gotcha!!! Thanks......
Thanks for the video. I have a pole mount transducer. Should the transducer be pointed in any particular area (front, 90 degrees off bow, etc) when rotating the boat to calibrate?
I notice you was showing livescope screen in 2 parts the livescope and the map I was told you can’t split screen
Oh you can definitely split screen. Home combos
If you have 2 fisher the same type can I see the bean on the one that’s not showing livescope
So I followed the steps of calibrating my compass and was successful, but I'm not getting the boat in the top-right of Livescope view. Any ideas?
Nevermind. I found that I had to Edit Overlays, then show Compass Tape on Top Bar.
I currently have a Garmin live scope LVS 34 with a GLS 10 black box on a 93SV screen. For some reason I cannot get the cone to show in the direction after I have calibrated the transducer and I am having a good GPS connection. Any advice in settings on this? I would greatly appreciate it. Thank you.
For indicator on your screen will not always show the direction of the transducer. There's a couple different settings for how that is displayed. I prefer having the map setting to north up which tends to be more accurate to show the direction the panoptics is pointing on the map. As far as the display in the upper right hand corner on the pan optics screen, I've never had Good luck with that.
Great information, I just celebrated my system just like you suggested. The problem that I am incourting is that the cone disappears on the maps . I go back to celebrate it however the system says that its successfully calibrated. AHRS is turned on. Any suggestions on what the issues could be? Thanks
Anytime the cone disappears that is because the compass has become uncalibrated. Recalibrate the compass. There's a problem with that happening when you switch from perspective mode back to forward or downmode.
Can I set a Livescope waypoint with a Garmin 1022 chartplotter?
Did this unit have a steady cast heading sensor ? Curious cause the boat icon beam won’t match using AHRS alone to direction of the LVS32 transducer , when not moving /stationary
Finely got a successful calibration after many failed tries or getting a message "must be in forward perspective" many times, even when the transducer is mounted in forward and forward or auto is selected in menu. After finally getting successful calibration worked great for a few days. Then suddenly the screen picture would start to swing as though it was hanging on a pendulum and the pointer extending from the boat icon would rotate quickly and constantly. Turning AHRS to off would bring back normal screen but, of course, no boat icon. Then eventually when turning AHRS back on would get a screen with multiple quarter circles radiating away from the 0 point. Checked voltage from all power, all good (new batteries). Checked all connections, all seem to be good. Please help!
If you change to perspective you will loose your calibration.
Also have latest software update 13.30. ECHOMAP Plus 93sv, ECHOMAP UHD 93sv, and Panoptix connected thru GMS 10 network port expahder.
@@818OutdoorsHave never used perspective view. Sounds like you are telling me I have lost my calibration. I will recalibrate. For some reason it is an arduous process, that is why I have not done it again. Thank you for the quick reply. It is greatly appreciated.
Jason, I need your help please!! When I set a waypoint using Livescope it drops the waypoint beneath my boat. How can I fix this?? I appreciate it very much, Thank you!
I have a scale that looks like a ruler. How do I remove it.
Why when I go to maps I’m not seeing the cone. And mines is not showing a boat icon?
Just subscribed...Setting up new rig..have 2 126s up front and 2 at console..should I calibrate the bow units individually..any reason to calibrate console units..Do I turn the boat with big motor...or trolling motor
Thx Jack B
The calibration is in the gls10 livescope module. Once the calibration is done all units will show calibrated in the livescope. Just turn the trolling motor if it has the capability to rotate 1.5 times.
Thankyou Jason very helpful..
JN
JB
My compass only points the right direction if I’m moving. What’s up with that?
Having issues after calibrating my compass, the cone direction is pointing in the opposite direction of where my transducer is pointing. Do you know how to fix this issue.
Great info. I’m about to drop the hammer on buying a Livescope. I’ve got a boat but I’m going the portable route with mine. What’s your price on a 1222 set up like I see in the background?
I have a pole with Livescope 32
And in forward I notice that my beam is pointing off to the left is this correct ? that’s for your video
Jason, I'm trying to figure out if there's any advantage in sonar response time between the higher end and entry level units running livescope. Do you know if the the GPSMAP units are more real-time vs the other units garmin offers or is the minute latency the same no matter what head unit you use with livescope? I have not seen or read any info on this scenario yet and would be nice to see if you can shed some light on it. Thanks!
The GPS map isn't exactly higher end. The 8600 specifically is the high end. The biggest difference is sonar wattage power capabilities and processing power. For just livescope there's not a big advantage over 106 or 126.
Jason, Do you have to calibrate the Livescope everytime you turn off the power to it?
When I’m on livescope this works with the boat but on maps it’s not showing me the cone area is this a setting somewhere?
Thanks
Great Video! Question, are you using the navigation map? I’m new to this game.
Fishing map
any idea why I keep getting a magnetic enviroment reading of 10 or so and fail I do have a transducer cable running with livescope cable on trolling motor. with everything off except livescope I still have this problem any advice is appreciated
If the transducer is mounted near the motor portion of your trolling motor, the magnets internally will screw up the compass
Will that happen even if trolling motor is off? I do also have it on a perspective mount
@@buckt12 yes
@@818Outdoors thank you very much for your help . I will move it and try again
Hey Jason. I calibrated my unit. Was a success. However on the maps the compass is off 180 degrees. How do you fix that? The compass shows correctly to the right and the left left off of the front of the boat. The boat is pointing to the south physically so on the maps the roads and lakes etc are off 180°. Any suggestions on how to correct?
Check your transducer to make sure it's mounted in the proper orientation. The word Garmin should be level in the cable should be to the rear. Also you have to understand that only when the boat is moving will the map orientate to the proper direction with the boat icon.
I turn AHRS off and manually select forward. Obviously no calibration.
If I turn AHRS ON and properly calibrate, Will the LS image be any different?
Or is the only difference, the things you showed. Ty
Yes, AHRS does a lot for the image quality
I have a compass that shows the cone in relation to north, it doesnt have a boat icon in the right corner of my 93sv with a lvs32 and gls10. I can't figure this out any ideas? Thank you!
Yes that's the new updated icon
@@818Outdoors well that's lame! Why would anyone care where the cone is in relation to north instead of the real time location of where its pointing. Garmin is trippin on this one. Thanks for the response!!
@@SeeLifeBro because in order to track where it's pointing when the boat is not moving, you would need a steady cast sensor. Otherwise the GPS boat orientation is achieved with forward or backwards both movement. When you're in one place, the charplotter does not know what is the front and back of your boat
whats the mount the transducer is connected to?
Awesome tip! Do you sale the shuttles?
No, contact summit fishing Equipment for that
NEW SUBSCRIBER
Jason in order to accomplish showing the panoptix area on map do I need to install a heading sensor..
No, just calibrate the compass in the livescope menu.
I have calibrated the compass but the beam doesn't show up on the fishing chart (software all up to date)...is there a setting to turn this on (the AHRS in turned on)? Cheers
Be sure "panoptix area" is active.
@@818Outdoors thanks mate. I will look for that in my mapping menus. Cheers
Orientation then Forward view.
I’m new to Livescope. I am installing a Garmin Livescope 34 plus with a 1022 chart plotter. Do I need better maps to do what you are doing? What do you recommend? This is a game changer IMO. Thanks!
The 1022 does not come with maps, the 1042 does.
Can I purchase a map program for the 1022? Which program would you recommend?
@@richardmontgomery6173 yes.
@@818Outdoors which fishing map do you recommend? Thanks for your help!
@@richardmontgomery6173 it depends 9n your region. If you are inland us then get the inland maps. There are more detailed maps also.
What’s your opinion on the new Lowrance Livesight
from what I've seen it's definitely not as good as livescope. Doesn't seem like it has quite the features and definitely does not have the beam splicing right.
I am having problems finding my brush pile at the WP having a steady cast will it enter fill with that
You have to make sure when you mark your waypoint that you're marking it at the cursor location and not at your boat location.
I am doing that I mark the WP from my screen and using the tear drop Is it marking wp from the map or gps
@@daviddincler7494 You're better off going into the livescope screen and using the cursor to pause crosshairs on the brush pile, then mark that location. That will drop away point on the actual brush pile. Make sure you have your compass calibrated.
Do you want ahrs on for ice fishing? I have no clue what it is. Can you explain please
You always want it on for livescope.... No matter the situation.
@@818Outdoors The situation I get with AHRS on is multiple concentric rings radiating from 0 like Saturn rings. Refuses to calibrate no matter what. Have latest software on sd sent by Garmin. 13.8v from LiFePo4 directly to GLS10 supplied power cord. If I want livescope I cannot have it on!
My compass won't stay calibrated for some reason, anyone else have that problem? I am running a nmea 2000 network with a steady cast heading sensor also.
Im having the same problem.
Mine worked great for a year or so. Then would not stay calibrated for several months. Now will not calibrate at all. Keep getting message needs "proper orientation" Cant find anywhere where Garmin defines "proper Orientation". I assume its forward. Still get same message. Thought it may be a low voltage problem. LiFePo4 reads 13.8v dedicated to GLS10. Tried other good, new batteries. No success. I gave up and went fishing instead of messing with electronics. Wish Garmin would help me.
Does this feature add much battery drain?
No, it makes absolutely no difference on battery usage
When I calibrate my boat icon is 180 degrees off. What did I do wrong
I have the same issue. Mine is about 90 degrees off.
@@brettwren7824 I have the same issue, 90 deg off. Garmin just tells me to put it in the water and re-calibrate. Tried like 10X. No luck still off by 90. I wish I could get it to work.
@@JigglinGem are you saying the yellow cone is pointing 90° when your trolling motor head is pointing straight ahead? I mean the cone is always 90° off of the direction your trolling motor is pointing.
How often does the calibration need to be done?
not that often, when your little boat icon disappears recalibrate. If you change from perspective mode to forward mode you'll most likely need to recalibrate
Dose the Garmin 1222 also offer that?
Yes, it's a livescope thing, not a chartplotter thing.
@@818Outdoors thanks man, I just installed mine haven't even put it on the water yet so I'm trying to get as much information as I possibly, and see what I bought is totally capable of. I only got the livescope option on the transducer that's it.
What model unit was this on?
Echomap 93plus/93uhd
Jesteś mam przetwornik na sztycy muszę włączać kompas
Question Poster.. Good video. Are you an Aquarius? 🤣 Wierd question I know. But this is just some Aquarius stuff to me to be fascinated by something that is apart of something others over look. I'm doing this tonight.😁👍👍
Capricorn
@@818Outdoors 🤣😆😂 I was close I knew you had to be near!! Hilarious. This made my day. You got AQUARIUS traits Bro.🤣😂 All the best to you. Stay True to Yourself!! 👍👍👍👍