Is the Amazon Heat Stamp Worth Buying? - Leather Heat Foil Stamp Machine

SO for under $200 this heat stamp machine that I use for Leather craft / Leather goods is a great entry level machine for anyone getting into branding leather goods. I go over a quick unboxing, first thoughts, simple review on the Hot Foil Stamping Machine From Amazon.
I also have a link to Leather Stamp Maker for anyone interested in getting there own stamp die made.
HOT FOIL STAMPING MACHINE - amzn.to/3RVRvEF
Get your own die/stamp made! - www.leatherstampmaker.com
74leathercraft.com/
Rugged Leather Goods Sold here!! Thank you for your support
FIND ME ON SOCIAL MEDIA
TIKTOK - @74LeatherCraft
Facebook - @74LeatherCraft
Instagram - @74LeatherCraft
LEATHER TOOLS
============================
Hot Foil Stamping Machine - amzn.to/3RVRvEF
Sinabroks Pricking Iron - amzn.to/3D9PD6T
Barry King Mauls - amzn.to/3QyGbgm
Wing Divider - amzn.to/3B3NQh9
Thread Zap - amzn.to/3B7w5NM
Edge Rougher - amzn.to/3QwsqyQ
LEATHER CONSUMABLE SUPPLIES
=============================
Tokonole Burnishing Gum- amzn.to/3TQl63Y
50 Pack foam brush - amzn.to/3qpgnsv
Aquilim 315 Contact Cement - amzn.to/3U962yK
John James Needles size 2 - amzn.to/3RU6DCv
Smiths Leather Balm - amzn.to/3BraNfG

[@LaserEngraving911]

cool video, thanks for taking the time to share!, I think you were getting uneven results because your platen was not level. You can adjust the heat platen using the 4 screws.

[@fratinbo]

Thanks for showing the details! I think I will get one of those.. I am a papercrafter and this one might fulfill all of my needs😊

[@bbdj2779]

Nice review! Your samples look great. Would love to see a follow-up one year on. Would you recommend it? How has it held up? Do you use it as much as you thought? Have you had other dies made for it? Are there any tips you’ve learned that you could pass along? Would be good to see see how the die is installed.

[@mathewgow3804]

Can you give any temperature settings for different materials?

[@nobodyspecial1852]

I used to fight a square plate and fat flatwire springs often as a press operator. You can't trust them to stay right, they take some experience and vigilance to maintain, also lots of spares.

[@Sunshine-wk9bq]

Can this use to stamp on shoes

[@Davewutsup]

Not much can go wrong with them it's a heating element and a thermostat regulator. The rest is mechanical. I ordered a model but it doesn't have the digital readout and does have a thermostat reading. I want to possibly make my own dies. But I've been searching online for antique and bossing dies for hot stamping and can't find anything. Anyone know where I might find antique embossing dies? Thx

[@rubyks8253]

I need this. how much will be the cost including shipping to Australia Sydney i need 3-7cm?

[@S.erwinsdottir]

With the foil 130°C is too much. At least with mine that's similar. I use about 100°C with tapes.

[@MyLaserHub]

That’s good to know! Unfortunately some equipment and different brands of tape act different. Thank you for sharing.

[@stevenagebenwhite]

thin card and Leather only, works great, tried to do it on thick cardboard and didnt work, tried on a jiffy bag, didnt work, tried on a laminated document, didnt work

[@ashleighdeck3429]

I was planning to do a case covered in faux leather. Would it work on that do you think? Thanks

[@stevenagebenwhite]

@@ashleighdeck3429 so I got it working, basically, place thick card under and set the temp to below 100 like 95ish and each press hold down for 1 2 sec release 1 2 sec 2nd press and then lift and it comes out perfect :) hope yours comes out well too!

[@OmarOmar-lm3ui]

Hi, great video, Could you tell me what is the diameter of the slot?

[@MyLaserHub]

Thank you! It’s is 5.1mm x 5 cm / .20 in x 1.96 in. I’ve also got a link in description for more details!

[@aaront3749]

How is this working? I have the same machine and I see that your springs are already mentioned more than mine. I press mine down hard and still can’t get a good imprint.

[@MyLaserHub]

I’ve since sold the press since I don’t make leather goods. I did have to use a lot of pressure to get a good impression.

[@MsStaysh]

Do you think this would be good on lens and temples for optical acetate or metal?

[@MyLaserHub]

I wish I could help, but unfortunately I’m not familiar with that. I do apologize.

[@kuatliocelotl1]

ruclips.net/video/azXBLgXIl34/видео.html

[@commentcomedy23]

Hi there where do you buy the letter and T slot for this machine?

[@MyLaserHub]

This model just has a single slot to bolt the stamp die too, but I get everything from LeatherStampMaker

[@nameit.giftshop]

Hi, does the machine comes with individual letters to do the stamps? what ifi want to put a logo or specific design? thank you!

[@MyLaserHub]

Thanks for the question, it doesn’t come with letters, but I highly suggest leatherstampmaker.com link in the description. You can get a letter set or custom logo made.

[@ethandonohoe]

who makes the stamp itself?

[@MyLaserHub]

The stamp is from leatherstampmaker.com great people to work with!

[@barotharish5251]

Give me more details and price for Bharat (India)

[@rajuscreenprinting7134]

Price for mishion

[@SPalm-ti1zn]

Sloppy handling