11:44 check out the bug Johnny had on his back 😂.I love the way you did the exhaust.I went fishing in five different spots and didn’t catch nothing.Great upgrades on your boat.
You'll understand why they sent five props if you get into the logs and stumps 😂, from experience I suggest stick to mud and grass!! Otherwise you better have a stainless prop! My experience was three props for a quarter mile and done, but in really bad terrain 😂😂😂
Awesome video Nate, me being from East Texas was watching the water for the Devil's red eyes of gators when y'all were going through the swamp at night.
How much did you give for that bad boy? That adjustment bracket that bolts to the transmission is called a Jack Plate you can get them so fancy that they have a motor that brings it up and down but not in and out the in-and-out part of it is always fixed on my Skeeter I had a 10 in Jack Plate and you got to kind of mess with them one turn of the bolt makes a difference. So to find that sweet spot you drive it all the way down and give its a four turns to bring it up and then you will notice the difference each time you stop and redo it. So as you're coming up with it you do Ford turns and then do it again for terms and then once it starts getting so bad then you start heading back down but only use two turns and you'll you'll be able to feel the difference it takes a couple of hours cuz you got to stop kill the motor Maybe give the Jack played a couple of turns tighten it back down excetera excetera excetera. But my point is it's called a Jack Plate
@@kristiankitsch6976 it’s definitely worth it, I’ve had go karts and mini bikes and I’ve built all the motors and did mikuni carbs and it’s a night and day difference the amount of throttle response and power gain you get throughout the power curve is insane. These engines are so choked up from factory it’s not even funny
Awesome video the fishing, and night running made this video! About where were you? Hoping to put together a 12’ or 14’ boat this winter for central Florida river, and back water running. Take care!
I;m jealous Guy's. I want to get out there fishing sooo bad and all the state parks are closed in Tennessee. They will Open soon and I will be out there. Thanks for the share Nate. Nice setup.
Tbc that’s one good looking motor on that little John bout. What size that 20ft or18? Up in Vermont we use the aluminum ones with trolling motor up the rivers. You ever go gater hunting man I wood love to go
@@brandoncodling6804 thanks for the heads up. I love being outside and I love nature. So I'm interested in seeing how the living situation is up there.
Question: Could you set this up with a steering wheel rather than the steering arm? I am replacing a 25hp merc on a 17ft Lowe type boat. I am hoping I can sub in a 22hp Predator motor. What do upu think?
I totally dig the surface drives for their turning/gear ratio ability, but where I live I don't have to deal with a lot of vegetation, just the occasional super shallow rocky stretch of river. Which do you think is better for shallow water and ease of getting the prop up over obstacles? The long tail or the surface drive? I'm putting together a 1542 with 13hp for putting around little rivers/big creeks
How does the boat sit ans handle in the water with just the driver in the rear of the boat? Would float pods be a thought after putting that motor and kit on? I've got a 12 foot jon that I want to put the same set up on but I rarely have a second guy with me to weight down the front.
Got a question I just got the same kit in but the belt driven instead of chain driven. The four bolts to mount the belt/chain housing is not threading in easy qt all and instructions say do not force them. My question is did you have a hard time to thread yours? Mine are also Allen wrench style.
Ya..it could be the powder cout paint in the holes..try to take a file or sand paper to get the paint off the inside of the holes..hope this helps ...good luck
I spelled description wrong because I'm a big dumb goof😂..thx for watching!
@Chuck Barnes that's cool man!..thx for watching!
Really like this jobnboat the rails are a nice addition 👍🏻
I like the fishing side of the channel as much as the kart side 👍 awesome buddy
Thanks Cain..that means alot
Cool video buddy🤘. Nice, well made looking kit. and 19 with 2, can't complain 👍. 2 nice bass and evening on the lake 👌🙂
Thank you Parts & Pieces!
11:44 check out the bug Johnny had on his back 😂.I love the way you did the exhaust.I went fishing in five different spots and didn’t catch nothing.Great upgrades on your boat.
Damnit!
Very awesome kit Nate
All ready have the 420 stage 1, so nice to be able to know exactly what to expect from the kit I’m ordering. Thanks for posting.
Thx for watching Friend
Had to watch this awesome video twice
Thx Adam!.. #tbc!
Sick kit 5 props thats sweet
Great job Nate and congrats on hitting 3k
Thank you Saul!
I love that your boat has a predator motor.
You'll understand why they sent five props if you get into the logs and stumps 😂, from experience I suggest stick to mud and grass!! Otherwise you better have a stainless prop! My experience was three props for a quarter mile and done, but in really bad terrain 😂😂😂
Another cool build Nate fly’s along 👍
I love this boat..thx again!
Came out super nice killer setup guys
Thanks brother!..My boy Antonio here..If your reading this go check out his channel..great tool reviews!
@@GoKartsorGoneFishin not sure what his channel is bro
@@AntonioClaudioMichael I'm talking about You!
7:36 best sound ever....
🍻🤣
This was such a great video this is the second time I'm watching awesome job buddy
Thanks so much for watching!..I worked hard on it!
420 Predator on the boat! Yeemar rocks! That is amazingly cool!
very cool looks like it works great , enjoyed this great vid
Thanks Kevin!
Awesome video Nate, me being from East Texas was watching the water for the Devil's red eyes of gators when y'all were going through the swamp at night.
If you can dream it we see it out in the swamp!..lol .thx for watching brother!
Nate this video rock's... Love your video's #MudMowers
#1 Supporter! #MudMowers
That 420 sounds good
That thing is pretty sweet!
Good video
Nice custom made boat motor using a predator engine
How much did you give for that bad boy?
That adjustment bracket that bolts to the transmission is called a Jack Plate you can get them so fancy that they have a motor that brings it up and down but not in and out the in-and-out part of it is always fixed on my Skeeter I had a 10 in Jack Plate and you got to kind of mess with them one turn of the bolt makes a difference. So to find that sweet spot you drive it all the way down and give its a four turns to bring it up and then you will notice the difference each time you stop and redo it. So as you're coming up with it you do Ford turns and then do it again for terms and then once it starts getting so bad then you start heading back down but only use two turns and you'll you'll be able to feel the difference it takes a couple of hours cuz you got to stop kill the motor Maybe give the Jack played a couple of turns tighten it back down excetera excetera excetera. But my point is it's called a Jack Plate
You need an old drum brake tool, to put idler spring on safely. Cool video thanks.
Thanks for watching Breezy..it was a bad injury...but he is healing up!
Love the vid very helpful and full of info👌🏻
Thx for watching friend..glad you liked it!
Nice job brother!👍🏻👍🏻
Boneyard💪
Nice catch man! Going to be getting a similar setup but a stage 3 predator 420
Let me know how that goes thinking about a carb
Rod and no governor on mine with heavier springs..
@@kristiankitsch6976 it’s definitely worth it, I’ve had go karts and mini bikes and I’ve built all the motors and did mikuni carbs and it’s a night and day difference the amount of throttle response and power gain you get throughout the power curve is insane. These engines are so choked up from factory it’s not even funny
Thx California..lol
Looks like fun. Now all you need is one of those on the back of a floating go kart and you can have "Go karts AND gone fishin'" ;)
😂😂you right!
Lucky sob's, I wish I could be out there with you. Don't catch them all!! LOL
I would be terrified if I fell in that water with all those gators ya got out there😂.I can’t believe you guys don’t get stuck.
Awesome video the fishing, and night running made this video!
About where were you?
Hoping to put together a 12’ or 14’ boat this winter for central Florida river, and back water running. Take care!
I'm central Florida as well..thx for for watching
I;m jealous Guy's. I want to get out there fishing sooo bad and all the state parks are closed in Tennessee. They will Open soon and I will be out there. Thanks for the share Nate. Nice setup.
Thanks Harold!..come on down we will take ya for a ride!
It's so crazy that everywhere is closed. What a downer.
Gotta trim up prop should be half out the water
Ya..took us a minute to get the trim right...she good now..thx for watching Friend
That kid included everything a except a six pack of beer.
That’s a monster hyvo chain
Thx for watching Friend
Mantapp👍👍
That's a sweet kit 👍
Saw that incident with the spring coming from a mile away 😓
Dude it was bad...like a fish hook..and I saw it too...ouch..thx for watching Friend
Tbc that’s one good looking motor on that little John bout. What size that 20ft or18? Up in Vermont we use the aluminum ones with trolling motor up the rivers. You ever go gater hunting man I wood love to go
Haven't been gator hunting...yet..its a 12ft jonboat..thx for watching friend!
Mint boss... and anytime boss.
Vermont sounds so awesome... i will probably visit this summer..
Where is a good place???
If you want to come to Vermont come to Montpelier capital state man
@@brandoncodling6804 thanks for the heads up. I love being outside and I love nature. So I'm interested in seeing how the living situation is up there.
Question: Could you set this up with a steering wheel rather than the steering arm? I am replacing a 25hp merc on a 17ft Lowe type boat. I am hoping I can sub in a 22hp Predator motor. What do upu think?
I'm sure it could be done...maybe with a pully system or something..let me know how it turns out
Hay just found your channel. That's a cool kit. Not sure if they are legal on few of our lakes in my part of SC but would like to build one if so
These setups should be legal in SC..They go anywhere friend..thx for your support!
I totally dig the surface drives for their turning/gear ratio ability, but where I live I don't have to deal with a lot of vegetation, just the occasional super shallow rocky stretch of river. Which do you think is better for shallow water and ease of getting the prop up over obstacles? The long tail or the surface drive? I'm putting together a 1542 with 13hp for putting around little rivers/big creeks
Long tail for that kinda terrain..or jet drive..lol
How does the boat sit ans handle in the water with just the driver in the rear of the boat? Would float pods be a thought after putting that motor and kit on? I've got a 12 foot jon that I want to put the same set up on but I rarely have a second guy with me to weight down the front.
U dont need the float pods...thx for watching
Where you get the side rails
Built them
Good video how do yall think that same set up would do on my boat I have a 14ft jon boat duracraft from the 70s I weigh 240
The 420cc will push it..in my opinion..thx for watching friend
I would go with the V twin 22 hp. No vibration and twice the HP
Got a question I just got the same kit in but the belt driven instead of chain driven. The four bolts to mount the belt/chain housing is not threading in easy qt all and instructions say do not force them. My question is did you have a hard time to thread yours? Mine are also Allen wrench style.
Ya..it could be the powder cout paint in the holes..try to take a file or sand paper to get the paint off the inside of the holes..hope this helps ...good luck
If you know size and thread count, run a tap into the holes.
How well does it run with one person ?
I wanna say about 24 26mph..it's been a minute...sorry for the late response
Clean setup thanks for the response
How is that kit holding up,,any problems or fabricating to it
Clutch keeps failing..locking up
Curious about your push pole, is that just 1.25 or 1.5 pvc?
It was made of fiberglass...not sure the thickness..thx for watching
I have a 420 on mine but can’t get it to run right. Also have the stage 1 kit
Did u unplug the oil sensor?
No I have not
jones yellow wire going into block..try unplugging it
Did y’all take the governor out?
Yes sir..thanks for watching Friend
👍
Thx for watching friend!
Hows this thing holding up? Man, 19 mph...youre doing better than my 1648 grizz with a 25 outboard and 2 guys with a 4 blade 9 inch prop
He actually bent a valve last week..besides that it holding up good...thx for watching Friend
If you still have that solid crank sprocket and would like to sell please let me know
Already sold it..sorry..thx for watching Friend
use a brake spring tool
Still running
Sure is
Where did y’all buy this from?
Mud-skipper.com
Tell them I sent ya..lol...thx for watching friend
Does it have neutral like it says on website?
Clutch driven so at low idle prop shouldn't spin...however we had problems with the clutch not disengaging..so ya..
What make is the boat
Lowe
What’s the speeds y’all seeing ?? And how is it holding up
20 mph with 2 peeps..we had a clutch lock up on it..working on getting it replaced...thx for watching
No problem with the chain or anything
@@dirtysouthoutdoor2662 chain is good
How did u order the kit.
Mudskipper.com
What’s your jack plate and trim setting and what carb are you running on it?
And what upgrades have you done to the engine
Speeds?
She would do 25 no problem when we got the trim dialed in...thx for watching
Like s link
Berapa harga hasnya mas brow
Translation?..thx for watching Friend
@@GoKartsorGoneFishinhe said how much dose it cost
Yikes..I can't remember...I wanna say 1500 bucks
Y’all this thing is junk. I purchased this exact set up and I wish I hadn’t.
Right on..thx for your feedback
никогда в жизни это изделие работать не будет