Which route do you think I should take in getting my wheels to poke a bit more? It’s already on tein lowering springs, koni struts, an skunk 2 rear arms.
@@McDzy No rubbing Almost just touches the plastic cover in the left rear wheel well For the fuel filler. I ran the 5 mm hub centric spacer on the front only Same as this video… the set up is bang on.
@@McDzy I ran Continental contisport 245/40/17R treadwear 280 No issues and unreal handling Hub centric 5 mm spacer in front only 17 x 9 + 35 looks the nicest but seems to give guys wheel lip rubbing on 8 gen civic. The 8.5 issue in my opinion will be the spokes bow out more as the rim narrows or the diameter of the wheel shrinks to clear calipers. Best to study real pics of those wheels to see if they are the look you like. :
bit of a late response but that looks like LED flicker. It's cause by the "cycles" of the LED, as LEDs actually turn on and off 50+ times a second. Sometimes the rate of the LED flicker matches the framerate of the camera, and at those instances it causes the effect that you saw in the video. Off camera they look completely normal. I believe the only way to fix the flicker is to go with a more expensive constant current (no interruption in current=no flickering) LED driver and I'm not sure if those are implemented in automotive yet.
Honestly so true... In the process of buying a set for my 99 EK LX.. barely just picked her up for way less than she is worth and has been running like a dream.. first time in the Honda world so I'm still learning about avaliable mods cause I wanna go fast real fast as im used to v8 mercs brabus and Porsches... I know a set of these wheels would be a great way to start as they will be so much lighter and bigger and as high performance and street legal as they are allowed Toyo on for Max grip and I think I'll be enjoying this car 1 million times more.. the only issue I face is my size.. idk if I should get 15x7, 16x7 or 16x8 .. Anyway peace out lol
Your Si is clean af with those new Rpf1’s😍
Super clean si
I love your si bro real talk I'm looking forward to adding some ICW racing, NS Series or Konig wheels 17in 7.5 on my FA1
Is there any rubbing in the front with the wheels fully turned? Looking to do a similar set up on my si. Also what's your camber and toe?
Got the same setup on my EP3 with a 35 offset and 5mm spacer
Gonna borrow your set up for my fa5, how much did you lower it from stock height ?
What size spacers did you use and did you roll ur fenders ?
bro subscribed! Do u think a 17x9 35 offset rpf1 on an fa5
Running a 10mm spacer all around would be a slight poke right?
Do you have to have springs to run this rim size setup?
These look great dude. I was thinking about doing this setup on my car too. Just gotta find a set used. If you sell these hmu
Where do you get your rear Vortex Generator and the side skirts?
Can you order those in chrome or did you get the rims dipped?
Whats that socket organizer tray u got for the impacts that looks like it goes up to 27? Where can i get it?
Which route do you think I should take in getting my wheels to poke a bit more? It’s already on tein lowering springs, koni struts, an skunk 2 rear arms.
Without rubbing. Do you suggest rollin the fenders as well?
Which espec(size) have the hankook tire on the back side?
Where did you get the side splitters?
where did you get the side splitter ?
I like those black ones. I need to find some for my 9th gen.
JAGExecutiveServicesInc debating on the black ones or originals
Did you have fitment issues in the rear?
Are you running spacers if so what are they
Nice video
Bought the SBC 17x9 45
Where did you get the music for this video... it’s great.
did you had any rubbing issues?
@@McDzy
No rubbing
Almost just touches the plastic cover in the left rear wheel well
For the fuel filler.
I ran the 5 mm hub centric spacer on the front only
Same as this video… the set up is bang on.
@@chrismartin4830 you think ill have any rubbing issues with 17x8.5 +45 offset with 235/40/17 or 215/45/17?
@@McDzy
I ran Continental contisport 245/40/17R treadwear 280
No issues and unreal handling
Hub centric 5 mm spacer in front only
17 x 9 + 35 looks the nicest but seems to give guys wheel lip rubbing on 8 gen civic.
The 8.5 issue in my opinion will be the spokes bow out more as the rim narrows or the diameter of the wheel shrinks to clear calipers.
Best to study real pics of those wheels to see if they are the look you like.
:
What’s springs you running bro
Dynosty sticker? Is that dynosty the tuning shop?
rolled fender and pulled fenders?
No rubbing on inside on full turns?
What are you lowered on
What size are the tires?
what are you lowered on?
Love the car bro put the wing back on lpl
Are your fenders rolled?
What is that flickering coming from the halogen bulbs? they look cool
Jordan Kim they might be led lights , it does that in the camera when recorded
bit of a late response but that looks like LED flicker. It's cause by the "cycles" of the LED, as LEDs actually turn on and off 50+ times a second. Sometimes the rate of the LED flicker matches the framerate of the camera, and at those instances it causes the effect that you saw in the video. Off camera they look completely normal. I believe the only way to fix the flicker is to go with a more expensive constant current (no interruption in current=no flickering) LED driver and I'm not sure if those are implemented in automotive yet.
Would have personally went with 18in. Would have filled in the arc more and be more balanced. Still clean tho
Not really. Just needed beeefier tires
Best rims you can buy for a Honda
Honestly so true... In the process of buying a set for my 99 EK LX.. barely just picked her up for way less than she is worth and has been running like a dream.. first time in the Honda world so I'm still learning about avaliable mods cause I wanna go fast real fast as im used to v8 mercs brabus and Porsches... I know a set of these wheels would be a great way to start as they will be so much lighter and bigger and as high performance and street legal as they are allowed Toyo on for Max grip and I think I'll be enjoying this car 1 million times more.. the only issue I face is my size.. idk if I should get 15x7, 16x7 or 16x8 ..
Anyway peace out lol
You guys are buggin they just cheap so every honda person oh rpf1 let's all jerk off... get some real wheels
how these are 17x9 and the wheels not passing the fenders?
Dylan Gardener the positive offset
What offset for flush fitment? And a little poke? Going to surprise my bf 🥷🏻
Any fender mods? What size spacer did you use for the front?
imHellaHungry rear are rolled flat. Front tabs are bent. 5mm spacer in the front just to clear the strut. No rubbing.
@@slow_si5909 dumb question but I'm assuming if I have +40 offset I should be fine and not need a spacer correct thanks
@@R3KONT3Kyou should be fine.
How are you gonna make money off flipping rims? Don't they lose value after you drive on em?
17 9jj
convert to FD2 Type-R bodykit :)
hmu if you’re gonna sell soon
Stock wheels looked much better
Dam looks like he didn’t reply to anyone..Definitely will get a like nope