Dale love the videos very helpful. Maybe someone can help me out on my ax15. It shifts fine when cold no problem once it warms up almost impossible to shift into first and grinds bad in reverse just don’t understand why it only happens when it warms up that the clutch doesn’t want to disengage
Was doing research on my 1990 Jeep, read your comment....mine is doing the same thing!!!! It's at a shop right now an I'm being told the problem is in the transmission....any advice from any jeeper????
I can't find where to put the vent back into my AX15 transmssion - when I bought the '89 YJ it was hanging loose (next to the broken reverse light switch wires - that I did fix)
yeah, it doesn't normally have a vent tube on the outside that i know of. You may have to drop the skid plate and lower the tranny to see what is going on there.
Good Morning, is there many modifications needed to replace a 2006 jeep engine with a 2013? on the internet anything around 2006 are almost given away, compared to early and later years.
@@alexanderbarrera9140 2000 and 2001 is a red headed stepchild of a year . They had the NV3550 manual trans. Also, they had a split exhaust manifold. Finding a computer for a 00-01 split manifold manual XJ is a lot harder to find than a computer for a 97 to 99 manual XJ
@@highwayxj9397 I knew about the nv3550 but man didn't know about the other stuff. If it were me I'd keep that one automatic and get a 98 or 97 already manual or swap it to manual.
Yep. Big big plans! Haha! well, actually, Big plan is have my daughter fix it up with me. We're already 1 project in on it. That video will be coming soon!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I found thay if you out the transmission in 3rd gear, its easy to mate the splines together.
You made it look so easy. I've been STRUGGLING ALLLLLLLLL DAY
Hey man got a 94 wrangler yj been restoring it as much as I can and I always come to your channel first!!
Hey Fernando! Yeah. It went in easier than I was expecting. I hope yours goes well too.
Enjoy your videos!!! I'm restoring my 1990 Jeep!
Congratulations on the dropping install of the transmission.
Thank you!
Nice. That's a tough job to do solo. Great advice on lining it up
Thanks! Worked out well. Wasn't super easy, but easier than I was prepared for. LOL!! I was ready for a big battle.
Dale love the videos very helpful. Maybe someone can help me out on my ax15. It shifts fine when cold no problem once it warms up almost impossible to shift into first and grinds bad in reverse just don’t understand why it only happens when it warms up that the clutch doesn’t want to disengage
Was doing research on my 1990 Jeep, read your comment....mine is doing the same thing!!!! It's at a shop right now an I'm being told the problem is in the transmission....any advice from any jeeper????
Same situation just started with my 1990 yj ax15. Any updates??
Great job Dale !! '' Much easier with two people '' Jason where are you ? Lol .. Take care my friend .
Yeah! Where is he 😫
It’s called work, fires, and social distancing. ☹️
Hey Dale! I just discovered your channel, I really enjoyed it. Looks like we tackle alot of the same stuff! Subscribed!
Hey! Thanks. Looks like you have a great channel as well!!
@@JeepSolid Thank you! If you're ever on the east coast reach out to me for a collab 💪
I have an issue with my ax15... It's difficult to engage 2nd gear but when the car is off the gears move freely between gears
I can't find where to put the vent back into my AX15 transmssion - when I bought the '89 YJ it was hanging loose (next to the broken reverse light switch wires - that I did fix)
yeah, it doesn't normally have a vent tube on the outside that i know of. You may have to drop the skid plate and lower the tranny to see what is going on there.
Good Morning,
is there many modifications needed to replace a 2006 jeep engine with a 2013? on the internet anything around 2006 are almost given away, compared to early and later years.
Nice!
How many bolts hold the transmission to the engine
I’m trying to find a place in PA that knows how to do an auto to manual swap on a 2001 XJ
You can do it!
@@alexanderbarrera9140 2000 and 2001 is a red headed stepchild of a year . They had the NV3550 manual trans. Also, they had a split exhaust manifold. Finding a computer for a 00-01 split manifold manual XJ is a lot harder to find than a computer for a 97 to 99 manual XJ
@@highwayxj9397 I knew about the nv3550 but man didn't know about the other stuff. If it were me I'd keep that one automatic and get a 98 or 97 already manual or swap it to manual.
Any plans for that cherokee?
Yep. Big big plans! Haha! well, actually, Big plan is have my daughter fix it up with me. We're already 1 project in on it. That video will be coming soon!
I have a 95 jy