You must have been working Wally too hard cause it wasn't the constant ridicule lol oh well Bills gonna be happier and a happy employee is a productive employee
Great content as always Clay! I'm sure like most you probably miss having Wally around but I'm sure you're gonna save a metric ass ton of money on replacing lost tools and not having to buy so many tub-o-towels to clean up all of the greasy spots he left behind. You and SOB, together you got this.
I just got the CTR861 brushless a week ago and love it almost went with the Milwaukee fuel but liked having the 60 tq over the 35 tq and love the ring light on it.
That Brute is Stout, watch in tight spaces it will busy your fingers. It doesn't spin as fast as the others but it def has a good bit more torque. It sucks to see guys leave, I imagine Wally must be a good tech otherwise you wouldn't put up with messes and organization for so long.
Thomas and Wally where both great for the channel we do not know ppl actions away from the camera hope Wally does good in life he gave me alot of chuckles as did Thomas I wish them both the best no hate for me i watch these vids to unwind and get a good laugh and seeing if any new tools come out i hope u all have a great weekend
Am I a spoiled brat because I couldn’t imagine a single day without a snap on cordless ratchet 😂 the fact that they improved them is unbelievable. Gotta try one out!
I think the Zeus is a trap but it's a good scanner..... the apollo is just as good at less than half the cost......but I'm happy with the Zeus and so is the shop.... I'm still holding back on getting a Brute because I'm happy with what I got...anyway good video and look forward to the next
I had the 1/4" Snap-on CT725 impact with the quick change chuck. It was ok, I ended up selling it and buying the Milwaukee M12 Surge. Quieter and cheaper to get extra batteries. For a cordless ratchet, the Brute looks nice but nothing beats the long neck. I would buy the long neck over the Brute, if I only had one choice to pick any Snap-on cordless ratchet as of right now.
I hope the Jelly Bean contest didn't drive Wally out. Best wishes Pigpen.......we'll miss you, for a little while at least...........maybe. OH Well, at least The Mouth Of The South will probably be back at the end of the school year. I really like those blue sunglasses........too bad I have to wear prescription glasses all the time, and can't wear contact lenses.
I special ordered one of those 14.4V Brute electric ratchets back in October. My Snap-On guy didn't even know what it was when I gave him the part number but he ordered me one. Two months go by and I ask him if it ever showed up, he tells me it did, and then tells me that he sold it to another tech because they wanted it. So my special order ratchet was sold to somebody else AND now they're on backorder. Still. 😡 So much for being one of his "valued" higher paying customers 🤷♂️
I have the 3/8 long neck snap on rachet love it you think it's worth getting a normal size brute? The brute came out a couple weeks after I purchased mine
My school got the Zeus scan tool like one months go and omg that scan tool is so amazing it’s unbelievable what it can do, but will I drop 13 thousand idk about that.
Now that you have had the brute for a while. Would you still recommend it. I have all the regular snap on electric ratchets and thinking about adding a long neck brute.
I still use the regular long neck more. Only time I use the brute is when there isn’t enough room to actually break things loose manually. It is stronger but it’s painfully slow.
Can you do some snap on ratchet comparisons? I like the Milwaukee but I’d like to grab me a snap on ratchet just don’t know where the differences and I prefer newer models
Oh I know brother I was just messin with ya. If you caught em with your teeth you must be able to afford em... thats the way I meant it. You think its better than the Milwaukee's?
Just get an Autel scanner they are so much better than snap-on nothing against the new scanners but the Autels dig deeper in the computers to tell you every code/ and or fault in the system I just traded my snap on scanner for the autel
I'm an auto student and my recommendation is that don't buy power cordless tool from Snap On because Milwaulke cordless tool has so much better than Snap On from cordless gun to the battery. buy Power cordless tool Miwaulkee instead SNap on.
I am going to wish him a good luck in his new career choice. I am sure that yourself and Bill will miss picking at him..... There will be less greasy tools around your shop! Thank for your video, I always take a pleasure to watch them and you are improving always... I appreciate the new series with tool box tour with peoples of the trade that share how they start in the business.
❗️❗️WALLY IS NOT ON VIDEO BECAUSE HE WENT BACK TO HIS OLD JOB ❗️❗️
Like no longer works for you?
Sad , but life happens best to u wally
Can’t wait to read all the comments asking where Wally is 🤣🤣
Why ? Thought he was a lifer.
You must have been working Wally too hard cause it wasn't the constant ridicule lol oh well Bills gonna be happier and a happy employee is a productive employee
Sorry that Wally moved on. Change is inevitable in our business though. I wish him the best!
Great content as always Clay! I'm sure like most you probably miss having Wally around but I'm sure you're gonna save a metric ass ton of money on replacing lost tools and not having to buy so many tub-o-towels to clean up all of the greasy spots he left behind. You and SOB, together you got this.
Those zerk joint rejuvenators do work with all the old farm equipment I work on....that baby paid for itself by lunchtime 👍🏻
We need a Hamilton tool box tour. And also get Hamilton do bring Thomas for a cameo
Oh yeah where’s Wally....jk i had to do it
Will you please, come and visit Santa Fe Springs, California. Goodyear.
I gotta hunting buddy just like Thomas.... talk about talking....this dude when he wakes up his feet hit the floor and his mouth opens lol
Hope Wally will be happy in the descion he made I wish him,well and will miss him
I sorry missed the comment and sorry about losing sally but keep trucking on you make my life better I love your videos and tools thanks
I meant Wally sorry
RIP Wally. Prayers to his family and friends.
Thomas and Wally both had good mentors, they will be missed !
@ 8:45
Let us admire dem o' der Red White and Blue Gumballs.
Murica!!
You Boys take care now.
Use that grease fitting tool with Aero Kroil is like magic.
I just got the CTR861 brushless a week ago and love it almost went with the Milwaukee fuel but liked having the 60 tq over the 35 tq and love the ring light on it.
That Brute is Stout, watch in tight spaces it will busy your fingers. It doesn't spin as fast as the others but it def has a good bit more torque. It sucks to see guys leave, I imagine Wally must be a good tech otherwise you wouldn't put up with messes and organization for so long.
Another good video. Gonna miss ole Wally. Fun to watch you guys harass each other..have a good one guys!
Missed some of the past videos. Where has Wally been, I miss seeing him.
Clay said in a previous video that Wally went back to work at his old job.
He got caught by his neighbor
Bill should have countered with “I’ll buy both brutes and you get scan tool”
I got the long neck version of the brute. Absolutely love it. I don't care that it has less RPM than most E-Ratchets, it just goes.
Thomas and Wally where both great for the channel we do not know ppl actions away from the camera hope Wally does good in life he gave me alot of chuckles as did Thomas I wish them both the best no hate for me i watch these vids to unwind and get a good laugh and seeing if any new tools come out i hope u all have a great weekend
Those turbo sockets are worth every penny,made by Mayhew whom also makes them for Matco.Come in handy on the rounded off smaller rounded off fastners.
I just got the brute a couple months ago and it’s badass . More effective than I thought it would be
Milwaukee just released a 200ft lb angled impact for their M12 line, $199 Bare tool
Kobalt right angle is cheaper and more powerful
Great video y'all have a great weekend and stay safe 👍
Am I a spoiled brat because I couldn’t imagine a single day without a snap on cordless ratchet 😂 the fact that they improved them is unbelievable. Gotta try one out!
I have mine rebuilt every 2 years. Cheaper than buying new version each time.
I think the Zeus is a trap but it's a good scanner..... the apollo is just as good at less than half the cost......but I'm happy with the Zeus and so is the shop.... I'm still holding back on getting a Brute because I'm happy with what I got...anyway good video and look forward to the next
I had the 1/4" Snap-on CT725 impact with the quick change chuck. It was ok, I ended up selling it and buying the Milwaukee M12 Surge. Quieter and cheaper to get extra batteries. For a cordless ratchet, the Brute looks nice but nothing beats the long neck. I would buy the long neck over the Brute, if I only had one choice to pick any Snap-on cordless ratchet as of right now.
Never had good luck with that grease joint rejuvenator
First time I’ve seen one
@@KoonTrucking been around the AG world a while. I think ours is even branded John Deere
They don't work.
Work every time if that’s the problem
@@Big_Higgy ^ this
Have tools will travel !! When the interviews starting clay ! ?
I hope the Jelly Bean contest didn't drive Wally out. Best wishes Pigpen.......we'll miss you, for a little while at least...........maybe. OH Well, at least The Mouth Of The South will probably be back at the end of the school year.
I really like those blue sunglasses........too bad I have to wear prescription glasses all the time, and can't wear contact lenses.
I special ordered one of those 14.4V Brute electric ratchets back in October. My Snap-On guy didn't even know what it was when I gave him the part number but he ordered me one. Two months go by and I ask him if it ever showed up, he tells me it did, and then tells me that he sold it to another tech because they wanted it. So my special order ratchet was sold to somebody else AND now they're on backorder. Still. 😡 So much for being one of his "valued" higher paying customers 🤷♂️
Oh man that’s happened to be with the MG725 also it sucks !
Our snap on guy had the zues workstation on sale.
Great vid. Thanks
bill is the reason i put zip ties on my casters!!!!!
I have the 3/8 long neck snap on rachet love it you think it's worth getting a normal size brute? The brute came out a couple weeks after I purchased mine
I traded my regular brute back in to get the long neck. But I’m a fan of the long neck style
Do you have or used the f80mp ratchet please let me know thank you Terry Williams Weller truck
Snap on 725 1/4 impact wrench with adapters up to 1 inch there's going to be alot of talking about all that torque lose
Cody Robertson what about the torque lose?
When do we get to see Hamilton's tool box and race car? Where's wally?
Wally moved on
Yes, we need a tour of Hamilton's stuff.
Show some brute video if you can. I’m wanting it too.
Good video mr. Clay.
Love my brute. It’s worth the money
My school got the Zeus scan tool like one months go and omg that scan tool is so amazing it’s unbelievable what it can do, but will I drop 13 thousand idk about that.
got mine for 10,000
Michael StJohn not bad at all man that shit is a beast of a scan tool
Nice you can afford the snap on tools. I gotta buy my tools from the back of some shady guys car in a dark ally of a seedy neighborhood!
Great video Clay!!! But you guys have too much fun. Is Wally still under the weather????
Wally went back to work at his old job
I love watching snap on Friday but we need to bring Thomas back lol wuts he up to?
I need them 18v nicad batteries Hamilton has sitting there!
Zombie5oh they are for sale
At dealer cost that means How much the dealer wants it to cost you. Now I'm looking forward to your thoughts on the brute
If you need some one to come in and a make a mess and leave tools all over the shop, I'm available. Lol.
Stacy Cornett are you mechanically inclined ???????
Wally left. Darn! Well wish him the best.
So Are you guys hiring ,I work for ford so I’m used to headaches
I miss Wally
Is Hamilton having problems ordering repair kits for ratchets and such? Snapon UK is proper struggling 😞
His drawers are full of them ?
@@KoonTrucking 5 week now without any repair kits, Snapon UK is struggling to get bits shipped. Spoke to a few dealers and they're all the same here.
Lol all the people asking where Wally and Thomas are. Do you even watch the videos or read comments? 😂
Tell Hamilton if he would come down to Tucson az once a month so I can buy stuff. Lol
After owning the brute for a year is it a ratchet you’d recommend for your viewers? Trying to decide between the old style and the new
I still like the old style because of the speed the best. The brute is nice of you can’t break things loose and no room to ratchet it manual
It's hard not to find one around here its Apprentice country it's hard not to find one ,😂😂😂😂😂
Now that you have had the brute for a while. Would you still recommend it. I have all the regular snap on electric ratchets and thinking about adding a long neck brute.
I still use the regular long neck more. Only time I use the brute is when there isn’t enough room to actually break things loose manually. It is stronger but it’s painfully slow.
Dentists just have smaller tools they have to work with !
What's the number on those blue point turbo sockets clay?
No clue I can check next week
If you go back in the video you can see the part number on the sealed set
122TSTY. If you want to save $200, they're made by Hudson Bearings and you can get them off Amazon with this part number TSCS2522B.
any idea what the part number on them glasses are?
Didn’t ask sorry
Can you do some snap on ratchet comparisons? I like the Milwaukee but I’d like to grab me a snap on ratchet just don’t know where the differences and I prefer newer models
Talking about electric ratchets?
Koon Trucking yes sir
Clay you must've caught a whole drum full of bullets from a Tommy gun with your teeth by now if you call that biting the bullet haha
I’ve put it off for months
Oh I know brother I was just messin with ya. If you caught em with your teeth you must be able to afford em... thats the way I meant it. You think its better than the Milwaukee's?
No more Wally?
I miss Wally 😭
Alex Cantero clay and wally cracking jokes on eachother was the best part of my day
I would love to have Wally come work for me in Memphis.
Best to you Wally
How many tools did Wally leave behind when he left? 🤣😂 wally will be missed
We found a socket so far
Bill looks like the guy off prison break
Hey I watched every episode. That was a very good show!
I agree awesome plot
Thomas wore some funny lookin jeans but he was alright
great!
Just get an Autel scanner they are so much better than snap-on nothing against the new scanners but the Autels dig deeper in the computers to tell you every code/ and or fault in the system I just traded my snap on scanner for the autel
You guys hiring?? I live in Alaska, but for the right price I'll relocate the family. 12+ years of experience.
What ever happened to Thomas? He start his own truck?
Went back to school
Wally had to leave, it got out that Bills new baby was actually wallys.
What type of sunglasses were those?
Fast Metal
Wanna see a video on brute please sir
Missing Wally. Who will you pick on?
So walley not working with you guys no more or on vacation or quit what happened?
He went back to his old job
@@KoonTrucking well good luck to him and you guys
FINALLY Friday.
wheres Tomas and Walter??
Well he only worked 3 days a week anyway. Lol
I want a brute
I'm an auto student and my recommendation is that don't buy power cordless tool from Snap On because Milwaulke cordless tool has so much better than Snap On from cordless gun to the battery. buy Power cordless tool Miwaulkee instead SNap on.
Do you plan to replace Wally or run with just you and Bill
Not sure yet
@@KoonTrucking sometimes I think in small shop bring in young guy and train how you want better in long run
I’m your stocker hahaha 😂
Idk if I’ll ever go all electric power tools 😓
Why
Hello clay i am ready for a good video
Hope so don’t disappoint you!
👍🏼
Nice ratchet
Hate that Wally left but where’s Thomas
Thomas has been gone for months. He went back to school
Anyone got the part number for the baby blue handled cutters
No part number stamped on them. Only micro shear 170II
I do know they are bluepoint
Thanks
Where's wally at ?
Going to miss Wally
Is Wally sell off his tools.
The topic seem to be what have happened to Wally?
Haha obviously he went back to his old job
I am going to wish him a good luck in his new career choice. I am sure that yourself and Bill will miss picking at him..... There will be less greasy tools around your shop! Thank for your video, I always take a pleasure to watch them and you are improving always... I appreciate the new series with tool box tour with peoples of the trade that share how they start in the business.
Are yo still off the cigarettes Clay? I remember I use to watch your Sunday livestreams with coffee and smokes!
Did Wally quit
The way y'all talked about Wally like he is gone?
He is he went back to his old job
What happened to Wally??
He went back to work at his old job
☹
@@KoonTrucking I hope ur joking, Wally is a good dude
Justin B not joking his last day was Thursday last week
We’re is Wally