I have that 1/4 inch ratchet with the speed handle. That bend in the handle along with the length has come in handy a few times. Worth the money to me.
I have both 3/8 and 1/4 drive flex speed ratchets. Been using the 3/8 for bench work engine building etc. It’s awesome totally replaced using the old speeders.
My snap on guy definitely sell those socket for BMW. I bought one and find out the new mini cooper also have the same plugs. They definitely come in handy
Just go with the Stone Cold Steve Austin hair do Wally! That's what l do. Lol BMW are fun long as your stocked up on triple squares, 12 pt, and even 8 points
Wally needs to put some preparation H on top of his head then grow out his side burns. The prep H will draw them up on top of his head lol! Just kidding Wally I have less hair than you! Must be those rough headboards!
Hi from the UK, great videos I have info on the BMW spark plug socket that you might like to pass on to Hamilton Here in UK a company called laser tools has a product number 4376 available on Amazon Hope this helps him to get his technicians equipped to get the job done. Peter retired tech
William Hare I’m about 5-7 years to retirement if my health doesn’t get worse. I’m that old. The tools that I must have to do my job I will buy but the tools that I’d like to have no longer matter. If I could get back all the money that I’ve sunk into tools and boxes I’d retire tomorrow.
Ok sounds good I’m gonna try the tub o towels saw them at local Lowe’s I usually use degreaser on my snap on tools and they just don’t look that clean lol thank you for the tips keep up the snap on videos and the repair ones
Hey clay have you noticed the snap on electric ratchet when it gets oil after couple of months, feels nasty like gummy or sticky. I always have clean tools and clean everyday with snap on wipes but still got sticky after 2 months. I had got rid of my milwaukee and bought the brute and regret it so muuuuch😭
I got the first brute to hit our area, my rep is a cool dude and new I wanted it. I bought the long neck 3/8 a month or so prior, and to be honest I like it better. The brute is def beefy and powerful but spins slower, I haven't don't a true comparison test but I would say the long neck is close in torque.
We did a video of the Milwaukee M12 VS Snap On Long neck vs long neck take a look at it ruclips.net/video/n0Jv7zGTAKM/видео.html That was the regular and not the brute and the brute is supposed to have more torque than the long neck
People are going to hate me for this, but I wish I got the snap on long reach over the Milwaukee. The Milwaukees head is to big and thick. I love my older Milwaukee 3/8 m12 ratchet over the new ones. That's just my opinion. I'm a huge Milwaukee fan love their m12 line absolutely amazing, but not the long ratchet. Well built heads to thick
I know you havent showed them in this video but the 1/4 ratchet body with the 3/8 drive you had put in, what do you use them for? I need to ask my Snap on dealer of he can make me one
Hay if Hamilton can't a sanpon sparkplug socket for the BMW sparkplug he can try Baum tools #121220 14mm for BMW your fan in Hollywood California and yes I forgot the word find l just have a ged
Power mic sorry ...... can’t make everyone happy. People fuss about not being able to hear so we drop $250 on a mic.... oops cut me a little slack though this is the first day of use so didn’t have a clue how powerful it really was
![KSI - Dirty [Official Visualiser]](http://i.ytimg.com/vi/VoDh1h1dPUE/mqdefault.jpg)
Thanks Clay. I still have an old pair of Proto brake pliers I bought used in 1979 when many cars still had drum brakes all the way around.
I usually hate repetitive intros but I love this one
I have that 1/4 inch ratchet with the speed handle. That bend in the handle along with the length has come in handy a few times. Worth the money to me.
I have both 3/8 and 1/4 drive flex speed ratchets. Been using the 3/8 for bench work engine building etc. It’s awesome totally replaced using the old speeders.
That ratchet does look like Wally. Lol
Wally the best mechanics are the ones that can take a joke. Lord knows the shop talk keeps us going.
I love watching these cause I get snap on in my Friday to but I get to do it again it really is my favorite part of the week lol
My snap on guy definitely sell those socket for BMW. I bought one and find out the new mini cooper also have the same plugs. They definitely come in handy
I enjoy snap on Friday 👍keep them coming
Love my 1/4 drive swivel head, speed handle. Great video Clay
Just go with the Stone Cold Steve Austin hair do Wally! That's what l do. Lol
BMW are fun long as your stocked up on triple squares, 12 pt, and even 8 points
Did you know Bob Ross was an Air Force drill sergeant before discharging and painting professionally
14mm 12 point spark plug sockets needed, Lisle, Carlyle and lots of the Taiwan tool makers sell those sockets.
The 18v grinder in the flyer at 9:20 is made by Metabo.
Wally needs to put some preparation H on top of his head then grow out his side burns. The prep H will draw them up on top of his head lol! Just kidding Wally I have less hair than you! Must be those rough headboards!
The flesh light comment had me freaking rolling!!
What wally said about rhino lining the tool cart ive been thinking about doing the same to mine,far too tempting laying stuff on the lid
There are reproductions of that catalog out there.I have the spring loaded ratcheting adaptor which was in that set,my grandfather got it somehow.
Get the brute it's a no brainier and is as strong as their air ratchet. The rpm is a little slower but not a problem
Snap on spark plug socket s9714mk. Changed alot of them
Great video y'all have a great weekend and stay safe 👍
I have bills issue I went through my box and had 11 SK 9/16 wrenches where I'd pick them up when I'd find them
The moral of this video is, if you keep your ford and BMW close, then you'll keep your snap on dealer closer than your valentine date. 🤣
I'm with clay I love the long neck 1/4 14.4 it's my most used ratchet
Good video clay !!! Have a good weekend guys
Those older tools are nice
WoW that is a nice looking box
Yeah! Snap on Friday!
Wally would probably just lose the fleshlight and not know what to do with it🤣🤣 just like he loses everything else. Lol lol
You guys have a good day I love your channel keep up the good work
Thanks for watching, I appreciate it !
I do body work but LOVE YOUR CHANNEL!! 👍👍👍
Thanks ! I appreciate you watching.
Hamilton best be pokin on that computer!
Those 1923 prices are alot more affordable!
Hi from the UK, great videos I have info on the BMW spark plug socket that you might like to pass on to Hamilton
Here in UK a company called laser tools has a product number 4376 available on Amazon
Hope this helps him to get his technicians equipped to get the job done.
Peter retired tech
I was waiting for the end of the video when you unload that cart into the shop
To get those higher torque numbers gotta cut rpm down....it’s the only way on these battery power tools 👍🏻
I have the high viz 3/8 drive an it’s a champ.
I think I’ll hang on to my air ratchets for a while longer.
Wayne Swicegood switching to the electric is well worth it!
I’ll never even consider using an air ratchet again.
William Hare I’m about 5-7 years to retirement if my health doesn’t get worse. I’m that old. The tools that I must have to do my job I will buy but the tools that I’d like to have no longer matter. If I could get back all the money that I’ve sunk into tools and boxes I’d retire tomorrow.
16:20 even the newer Audi's and VW's have those now
How new?
@@swiftaudi Audi A8's from 2018 onwards and I think they'll be putting them on all newer models
As soon as I seen that plug I knew it was a bmw. I just did one last week. I think it's a 14mm something like that
14:30 for the lawn mower joke.
1923 $0.55 in today's 2020 $8.27 ,how much do they sell now on the truck
Like 35 per extension
Wally just needs to trim the beard make it prim and proper but shave his head and shine it up with some toolbox wax
dang i want me one of them impact rachets now
The socket size for that spark plug a 14mm 12point
Hi Mr. Clay, tell grease gun Wally to get some "Happy Jack Mange Medicine " that stuff will grow hair on a rock.
Haha
I rather keep the speed of the old rachet. I pass on the slow brute. when my arms in the air zipping bolts speeds counts before the burn kicks in
Hey clay how do I get one of your hats and do you have shop tour
We don’t currently have any for sale, we are thinking about having some made up soon.
I did a shop tour it’s somewhere in my videos ?
Ok sounds good I’m gonna try the tub o towels saw them at local Lowe’s I usually use degreaser on my snap on tools and they just don’t look that clean lol thank you for the tips keep up the snap on videos and the repair ones
Use the old shop mop as a toupe Wally save you some money
I called that number you said was Wally's and a guy answered and said his name was Serge. Hmmm.
That’s Wally’s real name !
Hey clay have you noticed the snap on electric ratchet when it gets oil after couple of months, feels nasty like gummy or sticky. I always have clean tools and clean everyday with snap on wipes but still got sticky after 2 months. I had got rid of my milwaukee and bought the brute and regret it so muuuuch😭
Tub o’ towels ….. they won’t do that
So snap on was just as expensive back in the beginning as it is today . Good tools anyway.
i bought mine in 1982, cheaper, but quality was always there. u get wat u pay for. i do pay $90 for a wrench . it will outlast me on this earth
@@trazy38 well said
I got the first brute to hit our area, my rep is a cool dude and new I wanted it. I bought the long neck 3/8 a month or so prior, and to be honest I like it better.
The brute is def beefy and powerful but spins slower, I haven't don't a true comparison test but I would say the long neck is close in torque.
14mm sparkplug socket snap on part #s9714mkdl deep and s9714mk short use all time my brute is a beast I love it
Yawl are great!
Yes, snap on ratchet and it only costs as much as a new car
Haha a platinum f250 4x4
@@KoonTrucking lol right
My Snap-on man's truck looks like a tag sale, nothing like Hamilton's truck. Why is Bill so quiet?
That’s just Bill
How does this comapre to the milwakuee m12?
We did a video of the Milwaukee M12 VS Snap On Long neck vs long neck take a look at it ruclips.net/video/n0Jv7zGTAKM/видео.html
That was the regular and not the brute and the brute is supposed to have more torque than the long neck
Clay what's the part number of your 1/4" long neck snap on cordless ratchet?
Dude that's super easy to find yourself....
@@chrisgeorge1362 Thank you
People are going to hate me for this, but I wish I got the snap on long reach over the Milwaukee. The Milwaukees head is to big and thick. I love my older Milwaukee 3/8 m12 ratchet over the new ones. That's just my opinion. I'm a huge Milwaukee fan love their m12 line absolutely amazing, but not the long ratchet. Well built heads to thick
I’ve said the same things about the Milwaukee. I like the Snap On trigger on it better also
I know you havent showed them in this video but the 1/4 ratchet body with the 3/8 drive you had put in, what do you use them for? I need to ask my Snap on dealer of he can make me one
Just a smaller ratchet with a smaller head to get in tight spots
wally looks like the hill billys from water boy movie
Hey clay you rebuild engine's at your shop in frame or no
No sir
@@KoonTrucking just wondering I was wondering what counter bore cutting tool you might have but that answers my question
Y’all need to stop bullying Wally on his hair
Yeah yeah yeah
14mm 12 point spark plug socket
Don't forget the sailboat fuel
CTA makes a spark plug socket for the BMW and Nissan plugs they're like $8 and for like $15 you can get a swivel one they're awesome I have both
I think most young bald guys should deffinetly use bosley. Its only right.
It's alright Wally. At least this way you know that a woman will love you for you. Not your sexy hair ;)
Hello clay
Poor Wally.
Leave it to Wally to speed date.
Wally is probably as useful as that ratchet
Wally is a great mechanic
Can you send me one of them cadologs please?
Hay if Hamilton can't a sanpon sparkplug socket for the BMW sparkplug he can try Baum tools #121220 14mm for BMW your fan in Hollywood California and yes I forgot the word find l just have a ged
👍🏼
Most expensive also
They are expensive no doubt
Can you not run the ratchet next to the microphone. You’re killing me Clay...
Power mic sorry ...... can’t make everyone happy. People fuss about not being able to hear so we drop $250 on a mic.... oops cut me a little slack though this is the first day of use so didn’t have a clue how powerful it really was
Speed is better in the ratchets than tork
Beel
Rip headphone users 😂
Strongest battery powered ratchet. Weakest tool warranty
I had one I didn't like it
Wallyyyyyyyyyyyyyy
Lol