Absolutely brilliant video explanation of the Hill EC-3000 Compressor. Just brought one and am watching your video on how its all done. Thank you for being so clear. Regards Tony
Hi Tony , thx for the support 🙏🏻 One quick tip and I don’t think I covered it in the video and it’s also not in the manual. When filling a bottle that still has some air left in it for instance 150bar Start the compressor with the bottle valve closed until the compressor build the pressure up to 150 and then slowly open the bottle valve. I don’t know if it hurts the compressor doing it differently , but someone told me to do it that way and it makes sense not to push a blast off air in the other direction 😉
@@Airbuks Hi Airbus, Thank you for that tip. I’ve already done it following your instructions on the video and all seems well. My brand new compressor didn’t even come with full instructions just an A5 size quick reference guide. I had to Google the main instructions which is 9 pages long. Like what you mentioned on the reply, you would think they would add that to their instructions. Thank god for your video otherwise I would have probably blown the back of my house up LOL👍🏼
A very good comprehensive guide on how to use the ec3000. Wish the video was available when i first used mine. Not many show how to fill a tank and some reviewer's even recomend you do not. Have spoken to the engineer at hill's on this matter and he assures me that it's fine to do so. Have had no prob's with mine and am very pleased with my purchase. Great vid, and thank's!!
Thx for the support! The manual states it’s fine fill tanks up to 7L 🤷♂️ I don’t know why other RUclips guys don’t show it . Any way I hope the video could help in some way !
Very cool! I’ve had my EC-3000 for little over a year. Just changed the crank oil. 15 hours of use still running great. I’ve found the gauge on mine is about 10bar lower compared to my wika and sekhmet gauges, so I fill to 260 on my 250bar bottles. I’ve had days where I fill, shoot, fill for hours. Takes a lickin and keeps on tickin
I have 2 friends and they ea h have one if these. This compressor is so easy to use. Light enough to be portable. We go to the range we take it with us! Fills our guns all day long and works well with my 1 litre and a 3 litre tank!
I got one of the first models, Hill had a recall on them. Unfortunately for me it had to go across the pond (from U.S.A. to the U.K.) they were pretty quick to get me a replacement however the replacement was a refurbished model with obvious wear from whomever had it before me. I ended up having an issue several months later with the unit not being able to build pressure, I sent it back to air venturi in the u.s.a for warranty again. The issue got fixed (bad valve is my guess) but communication as to what they fixed was terrible & the crank oil wasn't emptied before shipping back to me so it was a mess when I got it back. Speaking of crank oil is difficult to get where I'm at. Decent compressor but I feel Hill could have replaced my new compressor with a new compressor, not a refurbished one. Not sure I'd buy another one due to the experience I had.
I appreciate your HONEST input, also. Thank you. I am going INSANE with Yong Hengs!!!! No matter how many gallons of iced Distilled water and royal purple you go through, they just BREAK too much, under DAILY USE and NEVER over 50c for me!
Nice review 👍, I should add that you must open the bleed valve for a second or two every few minutes while filling your bottle, since it's doesn't seem to have auto purge.
Only time i did that was when i filled a 7ltr tank from empty (which took a long time). If just topping up a tank fill, there's still not too much of a discharge when bleeding off at the end of a fill. uk
Pro tip... Put your bottle in a cage or reinforced sleeve (while filling) to avoid the devastation caused when a high pressure air tank fails. Even tanks that have passed testing can fail so do yourself a favor and get in the habit of filling bottles in a protected enviornment
Bought a Nomad 2. It seems to do everything I need it to. This Hill seems very nice too. Thanks brother. Excellent video. 👍 If no power is available. Always have a good hand pump. I have the Hill. It works excellent. But you better be in decent shape.
I really appreciated your video up to 7:50 when you got me goosebumps all over the back : NO filter nor dry pack between the compressor and your (expensive) airgun ?!!! For me an absolute No Go ! Moisture is the best way to ruin every PCP gun….
At least you enjoyed it for 7:50min 😂 I just made the video with the product as it comes from the manufacturer 😉 I informed them it would be recommended to include a extra water/oil filter and they are working on it . For me personally I permanently put a extra filter in between. I am long enough in the hobby to know what moisture can do to a pcp 😉👌🏻
@@Airbuks I’m glad about your knowledge and the care you “usually” bring to your precious guns. But then again, why not do it properly in your video ? Acting as a specialist and posting some kind of “tutorials” you have the moral responsibility towards your viewers to inform them about the right handling in pcp, which includes to make them aware of the moisture threat ! Either you do it right or you let it be, personally I can’t subscribe to your channel since you have lost all credibility by showing it the wrong way….
@@Crottedenez1000 oké no problem if you can’t subscribe 🤷♂️ I never claimed to be a expert in any way The EC 3000 has a build in moisture filter and I have showed the product as it is . As you can see I just received the compressor , unboxed it and used it as the manufacturen intended it , the more I spend time with it I thought it would be a good idea just in case to add a extra filter . All the best
Up to 7L ?? This sucks.Sorry about my voice !!!! My one and only is 20 Liters because I bought it when I bought the gun and I have not the cash for an other one . So... this compressor is not for me !! But , I´ll thank you for your honesty . You know , when you mentioned the max 7 liter to fill !! No one else did it before !!! I appreciate that !!
Hi , I understand. I also had some bigger tanks but was fed up with running to the scuba shop . This gives me a lot of freedom to be able and do it myself. I top off the bottle before I go to the range and don’t need a big bottle anymore
thanks for sharing this. Been watching this compressor as it looks like a nice one. Appreciate being able to see the unboxing and use. Gotta get me one.
Good friend of mine bought one of these and after a short while it gave up...Hills weren't too helpful in getting it repaired either...it was still in warranty!
I’m still using the Yong Heng hard case edition but absolutely need to get another compressor in time. I have 2 “Pony” bottles a 68 Cu in and a 88-100 CI in and 2 larger tanks, a 3 ltr and a 6.8 ltr all carbon fiber tanks. To top them off from 3000-4500 psi it takes currently about 15-20 minutes max. I wonder how long it would take with the Hill compressor you just bought? By the way congratulations! I hope you keep us informed on it’s status and how well it holds up. God bless and stay well.
Hi , to top off the 3L from 200 - 300 bar it takes about 15 min , don’t have a 6L but I guess your looking at 25 min maybe. It’s not the fastest compressor but very easy to use and user friendly aswel
I am surprised more people don't just get 6000PSI nitrogen tanks for their 4500psi tank fills. It's what I do. Maintaining and hoping for dry air out of a compressor, and paying for one, can hardly be justified over just getting an industrial air source.
Thats what I been wanting to do buy the nitrogen tank setup. Can you help me out please and tell me exactly what I need to buy and do to fill my two 4500 psi carbon fiber air tanks with the nitrogen setup. I was told to get a tall bottle tank for the nitrogen and then I think a 6000 psi setup for it or something. Can you please explain exactly what I need to buy and do. It would be very much appreciated. Thank you so much my friend.
that looks great. i just unpacked mine today. filled up all oil levels. decided to just fill up the fill whip. well i set it to 2000 psi. but when it gets to 930 psi the pop off on the cylinder head valve starts to pop off. so is all the pressure i can get is 930 psi. worthless! is there no quality check on these? also when i unpacked it the silicone oil had leaked 1/3 rd of the oil in the bottom of the box. and when i ran it the crank oil gouge was loose was leaking.
Wow! This compressor seems like a winner! It's the most intuitive and easy to use unit I've come across. Does this unit have an air filter to clean the air before it goes into the cylinders? How long have you had your compressor now? So far still performing well for you? Saw another video where they were recommending glueing the motor shaft to the pump head with LocTite and activator to "quiet" the operation. Have you heard strange noises coming from your unit? Thanks for posting.
Hi , yes I am still running it every week 👍 it does have a small moisture collection build in but I always use a extra one on the line between the compressor and the bottle I am filling just to be sure . I would advise not to do that loctide trick 😬 compressors make noise anyway 😉
@@daveyJ213 not sure what brand it is as it was gifted to me , when buying one don’t go for the cheap ones and go for quality . Also make sure they are hydro tested to a high pressure 450 bar minimum
Good ivning. I'm planning to buy Hill 3000 compressor. Could you please tell me what is better for it, once a week fill up 5 liter scuba tank, or every day a rifle? Thanks and greetings from Finland.
Doesn’t really matter that thing can handle both ! But I like the convenience of a bottle specially to take to the range . I use 2x 4L bottles that I fill 1 or 2 times a week
Hi! I've just buyed an Fx Airguns DREAMLINE but without quick connect system. Is there a problem ? Because I've just already ordered this Compresseur HILL EC 3000 . Thanks for your answer Best regards
The compressor automatically pauzes when the temperature gets to high and it starts back up when the temperature is lower . It’s smart and controls everything itself
I am using it now for a while and don’t have any issues with that . It has a onboard moisture collector but I added another larger one between the compressor and my thanks just to be sure .
Yeah I have noticed that aswel , when I put it on my work bench it doesn’t move at all but when I put it on the concrete floor it slides gently from the vibrations . If you put a piece of carpet underneath it holds it in its place 👍🏻
Still using it almost every weekend to fill my bottle back up after I went shooting. Up until now never had any problems with it , I did add a large moisture/oil filter in between to make sure the silicone oil and moisture doesn’t make it into the bottle . The compressor isn’t the fastest one specially in warm weather but it has been very reliable for me
@@Airbuks have you found much oil or water trapped in your moisture filter? I've noticed you like the huma air company, i'm deciding wether to buy my hill from krale or from huma. do you have any promo discount codes for the huma store?
@@worker2004 I noticed some oil and moisture when bleeding the bleedscrew on the ec3000 . Not that I noticed it in my gun itself but just to be safe I added an extra one with cotton shells inside . Didn’t have to replace them yet
Dag Mathias, ik heb juist geïnformeerd bij Huma, er komt weer een lading compressoren binnen. Ik wil er daarvan een bestellen. Jij zegt ergens dat je een extra filter tussen hebt gestoken. Kan je even meegeven waar ik die kan vinden aub? Heb je de originele vervangen of heb je de tweede filter erachter gehangen? Beide olietypes worden meegeleverd worden? Dank 🙏 alvast! Gr. uit Bree, Marc.
Hey Marc , inderdaad ik heb er een extra filter tussen gestoken omdat ik gemerkt heb dat er op warme dagen met hoge luchtvochtigheid toch redelijk wat vocht uit de eerste filter kwam na het vullen van een 3L fles ( 150-300 bar ) . Ik weet niet of het echt nodig is maar doe het toch voor alle zekerheid aangezien vocht en een pcp niet echt samen gaan 😉 . De filter heb ik zelf gekregen van een kennis maar je kan er veel vinden op het net . Je moet gewoon zorgen dat je er eentje koopt die 300bar druk aankan . Beide olies worden idd bijgeleverd
Any idea of how many top offs you get using the 3L bottle on the Impact using the 580cc CF bottle? what is your top off amount when doing so? Thanks...
I can get about 3 top offs from 110 to 250bar then every fill gets about 15-20 bar les every time . If you shoot a normal weight pellet and have a efficient gun , it’s more then enough for a afternoon of fun 👍🏻
With a 480cc I can get 3 fills from 150 to 250 bar and from there on I leave it connected and shoot straight from the bottle or I every fill will gradually go down . The 4 gill fill be max 230 then 210 etc . But I can shoot 2 tins of 25cal jsb pellets with 3L air . Enough for a afternoon of fun 😉
Yes offcours, I am still using it almost every weekend to fill up 2 3L bottles and 1 1.3L bottle . Works just like day 1 without any hiccups very happy with it . There ar faster compressors out there but this one is a good value for money. I specially like the fact that it doesn’t need a water cooling system with a bucket off water . It stop about 3 times for a minute or 2 to cool down when charging a 3L from 200-300 bar
Just went and saw the price. Think I will continue to use my Yeng Hong until it dies and buy another. I could do that 5x for the same money. Just don’t see that much value in a higher quality self contained unit when the results are the same.
@@Airbuks i didn’t like it either at first. Now I just keep a 5 gal bucket of water under the table the compressor sits on. It’s crazy to me that the cooling system increases the price that much.
I hear ya! I was one of the stupid guys when I got into pcp's I 1st bought an over priced Nomad II ended up killing that after 6mo then bought a EC-3000 had problems with it after 2mos tried to send back under warranty but they wanted $234 shipping....I should of bought a Yong heng and saved some grief and money
I was curious if you set it to PSI what the max allowable fill pressure is? If it goes to 4400 then you could squeeze a few more bar out of it. It looks like from the new manual on their website the new firmware is allowing 310bar/4500psi fills. However, I don’t think the firmware is field upgradable on the older units.
@@Airbuks I was curious if you knew what the max setting for PSI was on your compressor. I can’t seem to find that info anywhere. Thanks for the in depth video.
Good ivning. I'm planning to buy Hill 3000. Could you please tell me what is better for compressor, once a week fill up 5 liter scuba tank or every day a rifle ? Thanks.
@@leonidbrevdo3205 in my experience filling less volume, more frequently is less taxing on the compressor. It will keep the temps down and therefore less wear on the internal parts.
Hey Marc , ik gebruik hem nog steeds elk weekend en heeft me nog nooit in de steek gelaten . Het enige misschien minpunt maar ook een voordeel is de temperatuur beveiliging bij het vullen omdat deze olie gekoeld is ipv water en dus regelmatig pauzeert bij het vullen van flessen . Er zijn snellere compressors op de markt maar deze heeft geen rompslomp met een emmer water enzo . Die van mij zit in een kast en haal hem eruit en berg hem daarna weer mooi op
How often do you have to bleed off condensed water from your bottles to get a full charge on the bottles? I know there are water traps made that help prevent condensation from building up over time but how effective are the traps?
I do it now almost every time it stop in its cool down cycle , but I have a extra moisture filter added to be able to eliminate the need of doing it during the fill
@@Airbuks I have found a high quality one in Germany 🇩🇪 (explosion proof), am ordering it now , can be used on compressor or between bottle and gun , thanks for quick reply 👍
@@slintik still working very well , I have about 15 running hours on it . I had 1 small oil leak due to a broken seal but Hill did a great job getting me the part and explaining how to fix it . It was fix in about 10min Look around on eBay for high pressure air moisture filters and you will see many , the one I have seems the have disappeared. Just make sure it’s tested to well over 300bar
@@Airbuks Hoi Mathias, gebruik jij nog steeds deze Hill compressor? Ik heb een Nomad2 maar die heb ik in de verkoop. Als alles vlot verloopt is die dit weekend verkocht. De Hill geeft wat meer mogelijkheden en heeft wat meer reserve, denk ik zo. Gr. Marc
@@marcceyssens8524 hey Marc , ja hoor ik gebruik hem nog steeds elke week om mijn 2 flessen te vullen 👍🏻 Ik heb in november wel even een olie lekje gehad maar dat was eigenlijk een snelle fix met een oring te vervangen .
Hi mate I must of missed this video, As you did this 12 months ago are you still pleased with the hills compressor.? As I have been using the the compressor that you connect to your 12v car battery which only fill your bottle on your M3 but as I shoot on my friends land it was ideal but I’ve been through 2 now in under a year , So looking at the hills what are thoughts thanks mate ..
Hi mate , I am still happy with my Hill and use it every week to fill my 2 X 3L bottles at least 1 X a week and runs flawlessly. The only issue I had with it is that one of the burst disks gave way but that could be due to natal fatigue in the burst disk and it is a do it yourself service item of 3,99€ 👍
@@Airbuks Thanks for getting back to me, It’s seems like the best bet to me will it fill a 7 litre bottle if you do it in say 2 stages ..?. Keep the content coming mate thanks ps my m3 shooting awesome get some more videos up ..
@@simoncocher2622 just remember that due to the compressor not needing water to cool it fill a little slower then a water cooled one due to the cooldown cycle. But the benefit is a much easier setup compressor without a bucket of water and hoses
Great video can you update the software or firmware on it? I heard some people have said it shuts down a lot to cool off. Have you noticed that at all? Thanks
@@jeffojibway9284 hi , the Hill is still going strong 👍🏻 I had a small oil leak but that was a quick fix . The 300bar fill in small tanks is a benefit for sure with a 1.3L tank at 300bar I can refill my impact 2 times from 150-250bar If it would only fill to 250 I would only get maybe just 1 fill
Hey, how many refills can you do with the 3 littler to the 170 CC cylinder on the Impact? I am thinking of the same compressor and 3 litter bottle for refilling my Dreamline 220 CC cylinder.
🤔 I would gues at least 6 -7 fills maybe more , I can fill my impact M3 with 480cc tank about 3 times from 110-250bar and then I leave it connected and keep shooting till the bottle reaches 150bar . More then enough shots for a afternoon
@@lachezardanchov7312 about what exactly do you want a video ? There are some simple calculators on the internet that can tell you how many fill you get out of a given bottle
@@Airbuks Hi, i didn't know you can leave it connected and keep shooting. I thought that after each refill should be depressurised and disconnected ( cylinder and refilling bottle)
@@lachezardanchov7312 I mean once the 3L bottle reaches to 230-250 bar I can leave it connected to the gun and keep shooting until the bottle pressure gets down to the regulator pressure.
Hi , yes I am still very happy with the compressor 👌 works very well for my needs. I am using a extra moisturizer filter with cotton inside just to make sure I have as dry air as possible. The make I can’t tell as I got it from someone who stopped using it and there is no label on it . There are enough filters online but just make sure you have a good quality one that is rated to use at 300bar
@@Airbuks Thanks for the quick reply. Love watching your video. I ordered an ec3000 Looking forward to using something better than a Chinese "orange shoebox" compressor that I currently use. Now I suppose I should get a CF air tank. What size would you recommend? I was thinking about a 3liter. Is that a good size in your opinion? Can that size be filled with the ec3000 without damaging the compressor? I'll be using it with an Impact MK2 and a Wildcat MK3 Thanks again for all the great content you provide.
I can recommend hooking up the dry air filter from Air Venturi for the compressor's incoming air (you can also make this yourself for 1/3rd the price with pieces from Amazon as the AV filter is a bit expensive altho worth it) PLUS a 8mm fast connector with cotton tampon style filter in between the compressor and your rifle. In combination with the Hill built-in filter this gives you a 3 guard moisture blocking system and dry air is guaranteed even on very humid days. This system doesn't slow down the charge time either.
I was sick of these chinese compressors failing from time to time. I bought the Hill EC3000 and no single problem until now. But we need to be careful with the readings, as an example the gauge of my Imapct is at 250 and the Hill is at 235... So be careful and just not dial 250 and go...
Hi , try the hill compressor with a trusty big gauge . The gauges in the impact are most of the times way off . I know when my impact mkii says 250 it’s actually at 230 bar . The hill compressor is 2-3 bar of when I compare it to my big Wika gauge
Very well , still using it to fill up my bottles every weekend . Happy I made the step to be able and produce my own air . Although I in countered a small oil leak last weekend , I guess just unlucky me 🤷♂️ I contacted Hill immediately and they responded within hours and giving me great support to get it fixed
Not sure mate that’s what the manual state’s. Maybe it has to do with how long the compressor will run at one time or to make sure to drain the moisture in between 🤷♂️ I can try to ask them 😉
@@Airbuks It would be a big help if you could because i'm interested in gettign a 12 lt bottle, and could you also please tell me if i can have 580cc full bottles and swap them on the gun when one empties ?
@@FireTheHoker the bottles you can swap all the time I do this aswel . I don’t see the need to ask them if you can fill a 12L bottle as they state in the manual max 7L 🤔
The main problem is too noisy, it's like rice mill, i wander why air compressor can't be made with less noise in this technolgy world, the noise is the problem
I don't mind the hand pump. Good exercise. But a big bottle would be to much for a hand pump. This airgun love is expensive to get started in. First you buy a cheaper PCP and a hand pump. Then you buy a twelve hundred dollar pcp. Then you need a electric pump. Then you need a portable filling tank. It ain't cheap. Unless you stick with a break barrel. And they pretty much suck by the end of the day. Cocking all the time.
@@Airbuks I gotta say...their is something special about a airgun that has that accuracy at that range. It's more rewarding than a powder burner for some reason. Of course not as powerful but I think they all are pretty amazing. Lewis and clark started it.. 😆
The day I bought a compressor was the day I started enjoying my PCP !
I can imagine, I gave me the feeling of freedom not worrying if I have enough air for the week 😉
@@Airbuks I even have a backup ! 😁
Amen!!
Absolutely brilliant video explanation of the Hill EC-3000 Compressor. Just brought one and am watching your video on how its all done. Thank you for being so clear. Regards Tony
Hi Tony , thx for the support 🙏🏻
One quick tip and I don’t think I covered it in the video and it’s also not in the manual.
When filling a bottle that still has some air left in it for instance 150bar
Start the compressor with the bottle valve closed until the compressor build the pressure up to 150 and then slowly open the bottle valve.
I don’t know if it hurts the compressor doing it differently , but someone told me to do it that way and it makes sense not to push a blast off air in the other direction 😉
@@Airbuks Hi Airbus, Thank you for that tip. I’ve already done it following your instructions on the video and all seems well. My brand new compressor didn’t even come with full instructions just an A5 size quick reference guide. I had to Google the main instructions which is 9 pages long. Like what you mentioned on the reply, you would think they would add that to their instructions. Thank god for your video otherwise I would have probably blown the back of my house up LOL👍🏼
A very good comprehensive guide on how to use the ec3000. Wish the video was available when i first used mine. Not many show how to fill a tank and some reviewer's even recomend you do not. Have spoken to the engineer at hill's on this matter and he assures me that it's fine to do so. Have had no prob's with mine and am very pleased with my purchase. Great vid, and thank's!!
Thx for the support!
The manual states it’s fine fill tanks up to 7L 🤷♂️ I don’t know why other RUclips guys don’t show it . Any way I hope the video could help in some way !
thank you for the clarification! I am up in AIR about which one to spend a heap on! I am used to crappy, but FAST Yong Hengs, about TWO DOZEN so far.
@@Dont_lose_sight your welcome
I’ve had mine for a few weeks now, great machine, easy to use, and fast.
Very cool! I’ve had my EC-3000 for little over a year. Just changed the crank oil. 15 hours of use still running great. I’ve found the gauge on mine is about 10bar lower compared to my wika and sekhmet gauges, so I fill to 260 on my 250bar bottles. I’ve had days where I fill, shoot, fill for hours. Takes a lickin and keeps on tickin
Yeah, or your Wika gauges are 10 bar higher as it should be.
I have 2 friends and they ea h have one if these. This compressor is so easy to use. Light enough to be portable. We go to the range we take it with us! Fills our guns all day long and works well with my 1 litre and a 3 litre tank!
I got one of the first models, Hill had a recall on them. Unfortunately for me it had to go across the pond (from U.S.A. to the U.K.) they were pretty quick to get me a replacement however the replacement was a refurbished model with obvious wear from whomever had it before me. I ended up having an issue several months later with the unit not being able to build pressure, I sent it back to air venturi in the u.s.a for warranty again. The issue got fixed (bad valve is my guess) but communication as to what they fixed was terrible & the crank oil wasn't emptied before shipping back to me so it was a mess when I got it back. Speaking of crank oil is difficult to get where I'm at. Decent compressor but I feel Hill could have replaced my new compressor with a new compressor, not a refurbished one. Not sure I'd buy another one due to the experience I had.
Thanks for this info.! I'm in the U.S. also and was looking at this compressor and the omega air charger. I think I will go with the Omega.
I appreciate your HONEST input, also. Thank you. I am going INSANE with Yong Hengs!!!! No matter how many gallons of iced Distilled water and royal purple you go through, they just BREAK too much, under DAILY USE and NEVER over 50c for me!
Nice review 👍, I should add that you must open the bleed valve for a second or two every few minutes while filling your bottle, since it's doesn't seem to have auto purge.
I thought of that aswel , but the manual doesn’t say that 😉 I will send hill a mail to ask about that
Only time i did that was when i filled a 7ltr tank from empty (which took a long time). If just topping up a tank fill, there's still not too much of a discharge when bleeding off at the end of a fill. uk
This looks like a fair priced, excellent compressor.
Just ordered my EC 3000 with the 6.8 liter bottle from Huma! Can't wait!
Congrats 🎉
I received mine today. Totally perfect.
You wont be dissapointed with it.
Pro tip...
Put your bottle in a cage or reinforced sleeve (while filling) to avoid the devastation caused when a high pressure air tank fails. Even tanks that have passed testing can fail so do yourself a favor and get in the habit of filling bottles in a protected enviornment
Thx 🙏🏻 I appreciate the suggestion 👍🏻
I am currently making one ( I am modifying a gas tank as a enclosure to put it in 😉 )
Bought a Nomad 2.
It seems to do everything I need it to.
This Hill seems very nice too.
Thanks brother. Excellent video. 👍
If no power is available. Always have a good hand pump. I have the Hill. It works excellent. But you better be in decent shape.
😂👍🏻
Professionele video's de laatste tijd.
Thx , we doen ons best 😉👍🏻
FX IMPACT MK3 😍 "my dream"
Love from Philippines ❤️
Great video after watching your review I ordered my Hill compressor should be here in a couple of days
Just bought one myself straight from hills I only live about 8 miles from where they are made . Really nice bit of kit 👌 nice video by the way 😀.
Thx 🙏 enjoy
I really appreciated your video up to 7:50 when you got me goosebumps all over the back : NO filter nor dry pack between the compressor and your (expensive) airgun ?!!! For me an absolute No Go ! Moisture is the best way to ruin every PCP gun….
At least you enjoyed it for 7:50min 😂
I just made the video with the product as it comes from the manufacturer 😉
I informed them it would be recommended to include a extra water/oil filter and they are working on it .
For me personally I permanently put a extra filter in between.
I am long enough in the hobby to know what moisture can do to a pcp 😉👌🏻
@@Airbuks I’m glad about your knowledge and the care you “usually” bring to your precious guns.
But then again, why not do it properly in your video ? Acting as a specialist and posting some kind of “tutorials” you have the moral responsibility towards your viewers to inform them about the right handling in pcp, which includes to make them aware of the moisture threat ! Either you do it right or you let it be, personally I can’t subscribe to your channel since you have lost all credibility by showing it the wrong way….
@@Crottedenez1000 oké no problem if you can’t subscribe 🤷♂️ I never claimed to be a expert in any way
The EC 3000 has a build in moisture filter and I have showed the product as it is .
As you can see I just received the compressor , unboxed it and used it as the manufacturen intended it , the more I spend time with it I thought it would be a good idea just in case to add a extra filter .
All the best
@@Airbuks Thanks, wish you too ! Stay healthy and best regards
@@Airbuks hi Tom! Can you give some details on the filter (which model, where to buy, how to install,…)? Would be super appreciated!
Up to 7L ?? This sucks.Sorry about my voice !!!! My one and only is 20 Liters because I bought it when I bought the gun and I have not the cash for an other one . So... this compressor is not for me !! But , I´ll thank you for your honesty . You know , when you mentioned the max 7 liter to fill !! No one else did it before !!! I appreciate that !!
Hi , I understand. I also had some bigger tanks but was fed up with running to the scuba shop . This gives me a lot of freedom to be able and do it myself.
I top off the bottle before I go to the range and don’t need a big bottle anymore
thanks for sharing this. Been watching this compressor as it looks like a nice one. Appreciate being able to see the unboxing and use. Gotta get me one.
Your welcome
What a great reviewer 10/10👍🏻
Thx 🙏🏻 for the support, really appreciate it 👍🏻
Great Review
Thx ! It really a nice quality product and love using it
@@Airbuks Thanks for your comments they are really appreciated.
Good friend of mine bought one of these and after a short while it gave up...Hills weren't too helpful in getting it repaired either...it was still in warranty!
😮 did you buy it directly from them or did you buy it true a other shop ?
Great vid, mine works perfect when its above freezing!!
Freezing temperatures are not fun for anything, specially not shooting 😉
Excellent compressor and a very good video.
Thx mate 🙏🏻
Excellent informative video my friend 👍
I have been waiting on one of these vids for a long time.. thank you ...ciao from Australia
Your welcome, glad it can help 👍🏻
I’m still using the Yong Heng hard case edition but absolutely need to get another compressor in time. I have 2 “Pony” bottles a 68 Cu in and a 88-100 CI in and 2 larger tanks, a 3 ltr and a 6.8 ltr all carbon fiber tanks. To top them off from 3000-4500 psi it takes currently about 15-20 minutes max. I wonder how long it would take with the Hill compressor you just bought? By the way congratulations! I hope you keep us informed on it’s status and how well it holds up. God bless and stay well.
Hi , to top off the 3L from 200 - 300 bar it takes about 15 min , don’t have a 6L but I guess your looking at 25 min maybe. It’s not the fastest compressor but very easy to use and user friendly aswel
I am surprised more people don't just get 6000PSI nitrogen tanks for their 4500psi tank fills. It's what I do. Maintaining and hoping for dry air out of a compressor, and paying for one, can hardly be justified over just getting an industrial air source.
Thats what I been wanting to do buy the nitrogen tank setup. Can you help me out please and tell me exactly what I need to buy and do to fill my two 4500 psi carbon fiber air tanks with the nitrogen setup. I was told to get a tall bottle tank for the nitrogen and then I think a 6000 psi setup for it or something. Can you please explain exactly what I need to buy and do. It would be very much appreciated. Thank you so much my friend.
that looks great. i just unpacked mine today. filled up all oil levels. decided to just fill up the fill whip. well i set it to 2000 psi. but when it gets to 930 psi the pop off on the cylinder head valve starts to pop off. so is all the pressure i can get is 930 psi. worthless! is there no quality check on these? also when i unpacked it the silicone oil had leaked 1/3 rd of the oil in the bottom of the box. and when i ran it the crank oil gouge was loose was leaking.
🙈 that doesn’t sound good , have you tried filling a rifle just to be sure ?
excellent review ! quality product !
Thx 🙏🏻
Wow! This compressor seems like a winner! It's the most intuitive and easy to use unit I've come across. Does this unit have an air filter to clean the air before it goes into the cylinders? How long have you had your compressor now? So far still performing well for you? Saw another video where they were recommending glueing the motor shaft to the pump head with LocTite and activator to "quiet" the operation. Have you heard strange noises coming from your unit? Thanks for posting.
Hi , yes I am still running it every week 👍 it does have a small moisture collection build in but I always use a extra one on the line between the compressor and the bottle I am filling just to be sure .
I would advise not to do that loctide trick 😬 compressors make noise anyway 😉
@@Airbuks Which inline filter are you running between the compressor and gun or bottle. Thank you for the great information.
@@daveyJ213 not sure what brand it is as it was gifted to me , when buying one don’t go for the cheap ones and go for quality . Also make sure they are hydro tested to a high pressure 450 bar minimum
@@Airbuks Okay! Thanks again.
i just bought the Hill EC-3000, will be delivered tomorrow. Can you tell me where to buy the adapter so that i can fill a 3L Bottle? Thank you!
Looking for that connection myself
It’s a din-300 to foster connection. It’s on huma air website. Just found it
@@eoinwestman6222 thank you, just ordered it there! (plus the 3L Carbon bottle - couldnt resist :-) )
@@borishuemer 😂 fair play. The hills pump will be purchased here too
Thanks for a great Video. Nice shots
Good ivning. I'm planning to buy Hill 3000 compressor. Could you please tell me what is better for it, once a week fill up 5 liter scuba tank, or every day a rifle? Thanks and greetings from Finland.
Doesn’t really matter that thing can handle both ! But I like the convenience of a bottle specially to take to the range . I use 2x 4L bottles that I fill 1 or 2 times a week
@@Airbuks Thanks a lot.
How can I buy this compressor. Please guide.
You can get them from Krale Schietsport or Huma air in Europe, outside Europe I can’t advise
Hi!
I've just buyed an Fx Airguns DREAMLINE but without quick connect system.
Is there a problem ?
Because I've just already ordered this Compresseur HILL EC 3000 .
Thanks for your answer
Best regards
No you just connect a quick disconnect probe to the end of the hose of the ec3000 and you are good to go
@@Airbuks do you know where i can buy a quick disconnect probe? (i know what is a quict connect probe but not the other.
Best regards
@@drngohou you can get them at many places like Krale Schietsport, best fitting, Huma air etc
it is OK fill the scuba tank without a time break? I'm afraid about compressor temperature. thanks
The compressor automatically pauzes when the temperature gets to high and it starts back up when the temperature is lower . It’s smart and controls everything itself
How much moisture do u get in to your bottles? or does it have some kind of a dryer? when u compress air u get water in it aswell.
I am using it now for a while and don’t have any issues with that .
It has a onboard moisture collector but I added another larger one between the compressor and my thanks just to be sure .
is it possible to have referencies for the little 0,5 l bottle and the adapter ? Thanks !
You can buy the adapter from Huma air aswel as the FX 580cc carbon bottle
When filling my gun the compressor tends to "move around" on the ground, how do you fix that?
Yeah I have noticed that aswel , when I put it on my work bench it doesn’t move at all but when I put it on the concrete floor it slides gently from the vibrations . If you put a piece of carpet underneath it holds it in its place 👍🏻
@@Airbuks Thanks for the suggestion I'll try that!
Hi there.
Can you plug it this compressor to 220v elec. Outlet?
Thia
Yes , if you buy the right version . I live in Europe and they are suited for 220v
@@Airbuks i'm from slovenia 😄
great video could you send a pic of the air and oil filter you added so i can buy me one also thanks
I am not home for a week , please remind me 👍🏻
Are you still using this compressor? Any problems so far? Moisture/ oil in your guns?
Still using it almost every weekend to fill my bottle back up after I went shooting.
Up until now never had any problems with it , I did add a large moisture/oil filter in between to make sure the silicone oil and moisture doesn’t make it into the bottle .
The compressor isn’t the fastest one specially in warm weather but it has been very reliable for me
@@Airbuks have you found much oil or water trapped in your moisture filter?
I've noticed you like the huma air company, i'm deciding wether to buy my hill from krale or from huma. do you have any promo discount codes for the huma store?
@@worker2004 I noticed some oil and moisture when bleeding the bleedscrew on the ec3000 . Not that I noticed it in my gun itself but just to be safe I added an extra one with cotton shells inside . Didn’t have to replace them yet
Dag Mathias, ik heb juist geïnformeerd bij Huma, er komt weer een lading compressoren binnen. Ik wil er daarvan een bestellen. Jij zegt ergens dat je een extra filter tussen hebt gestoken. Kan je even meegeven waar ik die kan vinden aub? Heb je de originele vervangen of heb je de tweede filter erachter gehangen? Beide olietypes worden meegeleverd worden? Dank 🙏 alvast! Gr. uit Bree, Marc.
Hey Marc , inderdaad ik heb er een extra filter tussen gestoken omdat ik gemerkt heb dat er op warme dagen met hoge luchtvochtigheid toch redelijk wat vocht uit de eerste filter kwam na het vullen van een 3L fles ( 150-300 bar ) . Ik weet niet of het echt nodig is maar doe het toch voor alle zekerheid aangezien vocht en een pcp niet echt samen gaan 😉 .
De filter heb ik zelf gekregen van een kennis maar je kan er veel vinden op het net . Je moet gewoon zorgen dat je er eentje koopt die 300bar druk aankan .
Beide olies worden idd bijgeleverd
So can it be used to top off 9L bottles from 250 to 300 bar?
The manual says max 7L bottles
Informative video. Thank you.
Your welcome
Any idea of how many top offs you get using the 3L bottle on the Impact using the 580cc CF bottle? what is your top off amount when doing so? Thanks...
I can get about 3 top offs from 110 to 250bar then every fill gets about 15-20 bar les every time . If you shoot a normal weight pellet and have a efficient gun , it’s more then enough for a afternoon of fun 👍🏻
@@Airbuks thank you, appreciate those numbers.
Nice Brother 👍👍
Thx 🙏🏻
@@Airbuks 🙏🙏🙏
Hi, good video - what is the adapter for the airbottle called?
It’s a bottle adapter from Huma air , you can find it on there website
Hi, where can you purchase more silicone and oil.. or can you use any brand ?
Huma air and Krale Schietsport sell the oils and lube
How many fills does a 3 litre bottle fill an fx impact 580 cc bottle?
With a 480cc I can get 3 fills from 150 to 250 bar and from there on I leave it connected and shoot straight from the bottle or I every fill will gradually go down . The 4 gill fill be max 230 then 210 etc . But I can shoot 2 tins of 25cal jsb pellets with 3L air . Enough for a afternoon of fun 😉
Any update on compressor,? How is it holding up?
Yes offcours, I am still using it almost every weekend to fill up 2 3L bottles and 1 1.3L bottle .
Works just like day 1 without any hiccups very happy with it . There ar faster compressors out there but this one is a good value for money. I specially like the fact that it doesn’t need a water cooling system with a bucket off water .
It stop about 3 times for a minute or 2 to cool down when charging a 3L from 200-300 bar
Just went and saw the price. Think I will continue to use my Yeng Hong until it dies and buy another. I could do that 5x for the same money. Just don’t see that much value in a higher quality self contained unit when the results are the same.
That I can understand, I went this route because I didn’t like the water setup needed with the young hen compressor.
@@Airbuks i didn’t like it either at first. Now I just keep a 5 gal bucket of water under the table the compressor sits on.
It’s crazy to me that the cooling system increases the price that much.
I hear ya! I was one of the stupid guys when I got into pcp's I 1st bought an over priced Nomad II ended up killing that after 6mo then bought a EC-3000 had problems with it after 2mos tried to send back under warranty but they wanted $234 shipping....I should of bought a Yong heng and saved some grief and money
Bob, I know what you mean. Have repaired my Nomad II 3 times in the last year, and it just went down again yesterday. Ugh.
Good video I just got the same one I love it
Love mine , still going strong 💪🏼
I was curious if you set it to PSI what the max allowable fill pressure is? If it goes to 4400 then you could squeeze a few more bar out of it. It looks like from the new manual on their website the new firmware is allowing 310bar/4500psi fills. However, I don’t think the firmware is field upgradable on the older units.
Interesting, thx for that info . I will send them a mail to ask about it 😉
@@Airbuks I was curious if you knew what the max setting for PSI was on your compressor. I can’t seem to find that info anywhere. Thanks for the in depth video.
Good ivning. I'm planning to buy Hill 3000. Could you please tell me what is better for compressor, once a week fill up 5 liter scuba tank or every day a rifle ? Thanks.
@@leonidbrevdo3205 in my experience filling less volume, more frequently is less taxing on the compressor. It will keep the temps down and therefore less wear on the internal parts.
@@bbeavers99 Thanks.
Do you get vibration from your compressor
Nice review, maar hoe gaat het er nu mee na een maand of vier in gebruik te zijn bij jou?
Is het zijn geld waard of zeg je nee niet kopen?
mvg Marc
Hey Marc , ik gebruik hem nog steeds elk weekend en heeft me nog nooit in de steek gelaten .
Het enige misschien minpunt maar ook een voordeel is de temperatuur beveiliging bij het vullen omdat deze olie gekoeld is ipv water en dus regelmatig pauzeert bij het vullen van flessen .
Er zijn snellere compressors op de markt maar deze heeft geen rompslomp met een emmer water enzo .
Die van mij zit in een kast en haal hem eruit en berg hem daarna weer mooi op
@@Airbuks Bedankt voor het snelle antwoord, goed te horen dat de beveiliging die erop zit zijn werk goed doet, kga er mij ene bestellen, grtjs Marc
Can't see a moisture filter. Is there any or it required an aftermarket one?
It requires a aftermarket one , I send them a mail with the suggestion to included it . I ordered one
@@Airbuks Thank you. Which one you bought?
@@amjadck www.amazon.se/gp/product/B08TML9GZT/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
how much does such a compressor cost?
About 1000€
Have you had any issues with this unit? Aloha, Mark
Nope , still running strong every weekend
How often do you have to bleed off condensed water from your bottles to get a full charge on the bottles? I know there are water traps made that help prevent condensation from building up over time but how effective are the traps?
I do it now almost every time it stop in its cool down cycle , but I have a extra moisture filter added to be able to eliminate the need of doing it during the fill
@@Airbuks hi there , could you recommend the extra moisture filter that you use ?
@@petertlr1644 i do recommend a moisture filter but I can’t recommend the one I have since I got it from someone and have no details on it
@@Airbuks I have found a high quality one in Germany 🇩🇪 (explosion proof), am ordering it now , can be used on compressor or between bottle and gun , thanks for quick reply 👍
@@petertlr1644 👍🏻 what’s it called ?
Awesome, is there a moisure(water) in tank?
Up until now I haven’t had any issues, but for safety I have added a extra moisture filter 😉
@@Airbuks thank you for reply, where you bought filter? still happy with compressory, any leaking/problems/service?
@@slintik still working very well , I have about 15 running hours on it .
I had 1 small oil leak due to a broken seal but Hill did a great job getting me the part and explaining how to fix it .
It was fix in about 10min
Look around on eBay for high pressure air moisture filters and you will see many , the one I have seems the have disappeared.
Just make sure it’s tested to well over 300bar
Mooie compressor!!!
Bedankt , het is een verademing om zelf lucht the kunnen produceren en niet meer afhankelijk te zijn van de duikshop 👍🏻
@@Airbuks Hoi Mathias, gebruik jij nog steeds deze Hill compressor? Ik heb een Nomad2 maar die heb ik in de verkoop. Als alles vlot verloopt is die dit weekend verkocht. De Hill geeft wat meer mogelijkheden en heeft wat meer reserve, denk ik zo. Gr. Marc
@@marcceyssens8524 hey Marc , ja hoor ik gebruik hem nog steeds elke week om mijn 2 flessen te vullen 👍🏻
Ik heb in november wel even een olie lekje gehad maar dat was eigenlijk een snelle fix met een oring te vervangen .
Hi mate I must of missed this video, As you did this 12 months ago are you still pleased with the hills compressor.? As I have been using the the compressor that you connect to your 12v car battery which only fill your bottle on your M3 but as I shoot on my friends land it was ideal but I’ve been through 2 now in under a year , So looking at the hills what are thoughts thanks mate ..
Hi mate , I am still happy with my Hill and use it every week to fill my 2 X 3L bottles at least 1 X a week and runs flawlessly. The only issue I had with it is that one of the burst disks gave way but that could be due to natal fatigue in the burst disk and it is a do it yourself service item of 3,99€ 👍
@@Airbuks Thanks for getting back to me, It’s seems like the best bet to me will it fill a 7 litre bottle if you do it in say 2 stages ..?. Keep the content coming mate thanks ps my m3 shooting awesome get some more videos up ..
@@simoncocher2622 Hill advices max 7L and it will pauze with every cooldown cycle so you should be good
@@Airbuks Thank you that will do then ..🏆💪👍
@@simoncocher2622 just remember that due to the compressor not needing water to cool it fill a little slower then a water cooled one due to the cooldown cycle. But the benefit is a much easier setup compressor without a bucket of water and hoses
Great video can you update the software or firmware on it? I heard some people have said it shuts down a lot to cool off. Have you noticed that at all? Thanks
If you can upgrade the software as a user I don’t know 🤔 but the cool down cycles are normal to protect itself from overheating.
@@Airbuks How has the Hill been holding up? is the 4300 psi max make much of a difference filling small tanks? mine should be here soon.
@@jeffojibway9284 hi , the Hill is still going strong 👍🏻 I had a small oil leak but that was a quick fix .
The 300bar fill in small tanks is a benefit for sure with a 1.3L tank at 300bar I can refill my impact 2 times from 150-250bar
If it would only fill to 250 I would only get maybe just 1 fill
Nice compressor but you need a water/oil filter...you can see how much water is being shed when the purge is opened:-)
Yes , I have realized it while editing 😬 I have ordered one and send a message to Hill and told them they should include it 👍🏻
@@Airbuks and what did Hills say out of interest ?
@@MrMattw975 they are working on one 😉
@airbuks Can you tell me what filter you ordered. Thanks
@@Airbuks Can you tell me what filter you ordered. Thanks
Hey, how many refills can you do with the 3 littler to the 170 CC cylinder on the Impact? I am thinking of the same compressor and 3 litter bottle for refilling my Dreamline 220 CC cylinder.
🤔 I would gues at least 6 -7 fills maybe more , I can fill my impact M3 with 480cc tank about 3 times from 110-250bar and then I leave it connected and keep shooting till the bottle reaches 150bar . More then enough shots for a afternoon
@@Airbuks can you make a video about that? I didn't know this was possible.
@@lachezardanchov7312 about what exactly do you want a video ? There are some simple calculators on the internet that can tell you how many fill you get out of a given bottle
@@Airbuks Hi, i didn't know you can leave it connected and keep shooting. I thought that after each refill should be depressurised and disconnected ( cylinder and refilling bottle)
@@lachezardanchov7312 I mean once the 3L bottle reaches to 230-250 bar I can leave it connected to the gun and keep shooting until the bottle pressure gets down to the regulator pressure.
Nice 👍
Hope you are using a filter on your compressor?
On order , i sa the moisture purge up on editing 😉
@@Airbuks great. Just wanted to get your attention to it.
👍👍👍
good compressor machine, how much does it cost?
1100€
@@Airbuks Thank you for your information
Mantap boskuh
I just can't wrap my head around the price of this compressor compared to a Yong Heng and what it's capable of.
I see what you mean , a important factor is maybe the Chinese manufacturer cost vs UK ones 🤔
Are you still satisfied with the compressor? Would you use a filter with/ desiccant bead? If so, which type/model of beads?
Hi , yes I am still very happy with the compressor 👌 works very well for my needs. I am using a extra moisturizer filter with cotton inside just to make sure I have as dry air as possible.
The make I can’t tell as I got it from someone who stopped using it and there is no label on it .
There are enough filters online but just make sure you have a good quality one that is rated to use at 300bar
@@Airbuks Thanks for the quick reply. Love watching your video. I ordered an ec3000 Looking forward to using something better than a Chinese "orange shoebox" compressor that I currently use. Now I suppose I should get a CF air tank. What size would you recommend? I was thinking about a 3liter. Is that a good size in your opinion? Can that size be filled with the ec3000 without damaging the compressor? I'll be using it with an Impact MK2 and a Wildcat MK3 Thanks again for all the great content you provide.
@@bobbysusenbach9687 hi Bobby , a 3L bottle is a great size for the Hill 👍 myself I am using a 4L and a 1.3L
I can recommend hooking up the dry air filter from Air Venturi for the compressor's incoming air (you can also make this yourself for 1/3rd the price with pieces from Amazon as the AV filter is a bit expensive altho worth it) PLUS a 8mm fast connector with cotton tampon style filter in between the compressor and your rifle. In combination with the Hill built-in filter this gives you a 3 guard moisture blocking system and dry air is guaranteed even on very humid days. This system doesn't slow down the charge time either.
What about 6lt 300bar
The manual states the max of 7L bottles so that should be oké
Thanks, im also planning to buy thats why i like to know first
I was sick of these chinese compressors failing from time to time. I bought the Hill EC3000 and no single problem until now. But we need to be careful with the readings, as an example the gauge of my Imapct is at 250 and the Hill is at 235... So be careful and just not dial 250 and go...
Hi , try the hill compressor with a trusty big gauge . The gauges in the impact are most of the times way off . I know when my impact mkii says 250 it’s actually at 230 bar . The hill compressor is 2-3 bar of when I compare it to my big Wika gauge
How you getting on with the EC3000?
Very well , still using it to fill up my bottles every weekend . Happy I made the step to be able and produce my own air .
Although I in countered a small oil leak last weekend , I guess just unlucky me 🤷♂️ I contacted Hill immediately and they responded within hours and giving me great support to get it fixed
@@Airbuks thats excellent news. Hills are a superb company, always willing to offer support which is what we, as the customer, want
how you liking the hill 3000
I like it a lot for what I need it . Tops of my 2 3L bottles every week . So nice not to have to go to a scuba shop anymore
@@Airbuks have you had any problems with it ?
@@ronnieumberger I had 1 small oil leak in the very beginning dat was a easy fix , since then no issues
Waw waw waw amazing i like I often fill my gun with this type of compressor
Is 300 bar the same as 4500 PSI.
Almost 4500psi is 310 bar
@@Airbuks thank you.
How much your pcp air gun sir
I am not a shop 🤷♂️
man, i would be dumping the air every time it stopped for a cool down to release that water; that wasnt just vapour!
I have added a moisture and oil filter now 👌🏻
@@Airbuks Hi, would you be able to make a video of that please?
@@jaytee8188 hi , no sorry that’s a ton off work just for a hollow tube with some cotton inside. You can find lots off them on eBay 👍🏻
@@Airbuks Hey no worries, thanks for replying anyway. Stay safe.
Nice
Why should bottles larger than 4lt only be filled by qualified people ? And what kind of qualification is required ?
Not sure mate that’s what the manual state’s. Maybe it has to do with how long the compressor will run at one time or to make sure to drain the moisture in between 🤷♂️ I can try to ask them 😉
@@Airbuks It would be a big help if you could because i'm interested in gettign a 12 lt bottle, and could you also please tell me if i can have 580cc full bottles and swap them on the gun when one empties ?
@@FireTheHoker the bottles you can swap all the time I do this aswel .
I don’t see the need to ask them if you can fill a 12L bottle as they state in the manual max 7L 🤔
@@Airbuks Thank You
Сколько стоит?
1100€
Ouch 🤕 half of new fx impact lol
The main problem is too noisy, it's like rice mill, i wander why air compressor can't be made with less noise in this technolgy world, the noise is the problem
I don't mind the hand pump. Good exercise. But a big bottle would be to much for a hand pump. This airgun love is expensive to get started in. First you buy a cheaper PCP and a hand pump. Then you buy a twelve hundred dollar pcp. Then you need a electric pump. Then you need a portable filling tank. It ain't cheap. Unless you stick with a break barrel. And they pretty much suck by the end of the day. Cocking all the time.
😂 indeed my friend, if someone told me 10 years ago what the hobby would cost and how addictive it is , i would’ve thought twice 😂😂
@@Airbuks I know sir. I'm fricken addicted to it. I'm feeling like an airhead.
@@garyhill9516 😂😂 but it’s the best hobby in the world 👍🏻
@@Airbuks I gotta say...their is something special about a airgun that has that accuracy at that range. It's more rewarding than a powder burner for some reason. Of course not as powerful but I think they all are pretty amazing. Lewis and clark started it.. 😆
@@garyhill9516 you're getting like a compressed air head. 😄
As if it's going to blast, i don't feel like standing near to it, it's too noisy
On camera it maybe sounds louder then it actually is in real life 👍🏻
Chek harga om
bagaimana saya cara memesan mesin compresor itu, dan dikirim ke indonesia
boleh saya minta nomer kontaknya anda
Order, ym from indonesia
This equipment and the air rifle gun it’s built for crazy people’s use arrows not for hunting.
It is oversized for carry To hunt ,
看中了没钱买
No wonder all you guys look like stick man. Love my hand pump and have the guns (muscles) to prove it.
😂
ferm gerief Matthi
Hey makker , mercie! Eindelijk niet meer naar de duikwinkel lopen 😉
Ibox