That's fantastic! We can't wait to see what you create! In the meantime, if you need additional resources, you can check out our blog here: bit.ly/3iDsn7j and our RUclips channel here: bit.ly/3pG7l9b. ~ms
Thank you Julie for that advice on Vinyl. I needed to know about the settings and that was good. Thank you. I would like a lesson on Rhinestone's as I do have the rhinestone kit but have not used it yet.
Thank you for watching Caroline and we are glad that you found the information helpful. Please see the link below for videos on the Rhinestone Kit: www.youtube.com/@BrotherCrafter/search?query=rhinestone
Great video as always. I did some vinyl cuts this week HTV on a bag. Came out really cute. I then took the same design and enlarged it rather large as it will be an outside decoration for the front of my house. Well, I was using my cm650w, my 12x24 mat. Thought I had things all together did my test cut. The blade was too low so I set it up and redid a new test cut. Stupid me I set it to 7. Did another test cut did not realize that I had already cut through the mat with the second test cut. Proceeded to cut the design and I cut right through my mat. I know better and do not know what I was thinking. I was thinking the paper that I was using was very thick when indeed it was not it was thin. I taped up the back of the mat and the whole from the test cut. I wil be replacing that mat. As I will still be using cm650w besides my new sdx230dx. I love both machines, Brother scan n cut has made a tremendous difference with the new machines. The Scan cut machines are truly what every crafter should own. Thank you for the awesome reminder and demonstration.
Thank you Julie for that information. If ever you do a RUclips on Rhinestone from Canvas workspace doing your own templates would be appreciated . Thank you again for the links.
Thank you for watching Caroline! If you are interested in the Rhinestone Starter Kit, please see the link below for featured videos: www.youtube.com/@BrotherCrafter/search?query=rhinestone
Hi Julie, why would the blade rip the vinyl? I’m using a brand new auto blade, which also cuts vinyl. I’ve just had to purchase a new cutting mat, so getting the vinyl starter kit was not an option for me right now… any suggestions will be very helpful 😅
Whats the difference between cut pressure en cut pressure half cut? I want to cut vinyl (half cut on) and changes the cut pressure because te cut was to deep. It worked. But i dindnt change the half cut pressure.
trying to activate my SNC rotary auto blade kit. taken to Brother Canvas with registered SNC. It shows a Brother cutting machine 332. what is that? I have a DX325. I searched web and YT and can't find a definitive answer. 4/29/2023
For directions on performing a test cut with a CM model of ScanNCut, please see the link below: help.brother-usa.com/app/answers/detail/a_id/144081 If you need further assistance, please contact Brother Customer Service at: www.brother-usa.com/support
Thanks Julie. You explain things so clearly. Great video 👍🏻🤗
We are so happy to hear that you enjoyed the video, Mary! ~rt
I just bought this thing, these videos are super helpful. Thank you
That's fantastic! We can't wait to see what you create! In the meantime, if you need additional resources, you can check out our blog here: bit.ly/3iDsn7j and our RUclips channel here: bit.ly/3pG7l9b. ~ms
Thank you Julie for that advice on Vinyl. I needed to know about the settings and that was good.
Thank you. I would like a lesson on Rhinestone's as I do have the rhinestone kit but have not used it yet.
Thank you for watching Caroline and we are glad that you found the information helpful. Please see the link below for videos on the Rhinestone Kit:
www.youtube.com/@BrotherCrafter/search?query=rhinestone
Thanks I don't always test first but Will now
Performing a test cut can be very helpful!
Great video as always. I did some vinyl cuts this week HTV on a bag. Came out really cute. I then took the same design and enlarged it rather large as it will be an outside decoration for the front of my house. Well, I was using my cm650w, my 12x24 mat. Thought I had things all together did my test cut. The blade was too low so I set it up and redid a new test cut. Stupid me I set it to 7. Did another test cut did not realize that I had already cut through the mat with the second test cut. Proceeded to cut the design and I cut right through my mat. I know better and do not know what I was thinking. I was thinking the paper that I was using was very thick when indeed it was not it was thin. I taped up the back of the mat and the whole from the test cut. I wil be replacing that mat. As I will still be using cm650w besides my new sdx230dx. I love both machines, Brother scan n cut has made a tremendous difference with the new machines. The Scan cut machines are truly what every crafter should own. Thank you for the awesome reminder and demonstration.
Thank you for watching Fawna! It is frustrating when a blade cuts through the mat. We are glad that you were able to continue with your project.
@@BrotherCraftsUSA Thank you for replying. My pleasure to comment. I love my scan n cut machines..
Thank you for this video. It helped me a lot.
Our pleasure, Nina! ~ms
Thank you Julie for that information. If ever you do a RUclips on Rhinestone from Canvas workspace doing your own templates would be
appreciated . Thank you again for the links.
Thank you for watching Caroline! If you are interested in the Rhinestone Starter Kit, please see the link below for featured videos:
www.youtube.com/@BrotherCrafter/search?query=rhinestone
Just what I needed. Thanks!
Thanks for watching Julia! We are glad you found the information helpful.
This was excellent!!! 😊
We are glad that you enjoyed the video!
Thank for the explanation, I was doing it all wrong....
We all love to see Julie in action! ~tw
Cute design 👍
Thank you for watching Sandy!
Hi thank you for sharing this.
Thank you for watching Noni!
Hi Julie, why would the blade rip the vinyl? I’m using a brand new auto blade, which also cuts vinyl. I’ve just had to purchase a new cutting mat, so getting the vinyl starter kit was not an option for me right now… any suggestions will be very helpful 😅
Hello Gail, You can find the cut pressure settings for cutting vinyl on your ScanNCut DX here: bit.ly/411P2hL. ~hf
Thanks
Thank you for watching Patti!
Whats the difference between cut pressure en cut pressure half cut?
I want to cut vinyl (half cut on) and changes the cut pressure because te cut was to deep. It worked. But i dindnt change the half cut pressure.
Hello Jorie, We would be happy to assist you. Where are you located? ~tw
@@BrotherCraftsUSA the Netherlands
Hello Jorie, You have reached Brother USA. Please refer to our Global Indicator link here for the Brother in your region: bit.ly/2Jjn21K. ~tw
I want to do the svg of olof I don’t know how to do multiple colours and transfer it after on my scanncut could you please help me
We would like to help. Please contact Brother Customer Service so we may assist further at:
www.brother-usa.com/support
trying to activate my SNC rotary auto blade kit. taken to Brother Canvas with registered SNC. It shows a Brother cutting machine 332. what is that? I have a DX325. I searched web and YT and can't find a definitive answer. 4/29/2023
Hello! We've consulted with our team and they can advise you further. Please reach out to our team here: bit.ly/3B5PJLU. ~ms
But what about the ScanNCut 2??
I don't have the DX.
For directions on performing a test cut with a CM model of ScanNCut, please see the link below:
help.brother-usa.com/app/answers/detail/a_id/144081
If you need further assistance, please contact Brother Customer Service at:
www.brother-usa.com/support