If you're in the US, go to any hardware store and look for springs made for garage doors. About the same price as a power twister (maybe a little more) and longer so you have some wiggle room.
Double end bags are cheap and probably better kit to use. Cobra bags are good too but ridiculously over priced. Same as aquabags. It's just a bouy with logo painted on it
thank you man!!! i dont have too much money and i was the same idea like you to do the cobra bag, and you do the cobra bag to easy and cheap in one video. nice👌 Saludos desde Mexico🇲🇽
This is pretty funny. I've thought about doing this years ago with those springs you see on garage doors. They come in multiple sizes and are typically 3 to 4 feet. Turns out they're either the same or more expensive than the power twisters lol. Edit: Damn, it turned out sooooo much better than I thought. Great job dude 👍🏽!
This was super helpful man. I've been trying to figure out how to make a cheap cobra reflex bag. My old slow (bottom spring) Everlast reflex bag is old, rusted, beat to death. I'm still using it but it's basically a little bit of metal and 85% tape holding it together.
not really. 50 years ago this how how the majority of people thought. they were creative and built things themselves rather than buying it for much much more money. Reedy is the last of a dying breed
I really like the idea of that kind of feedback and having to move from a punching bag. The pool noodles seem to be about the right kind of size to make sure you're accurate. The different colors could definitely be good for zones of practice. Actually what I want to do is take that same build but bring the spring a little bit lower and use it for my Filipino stick practice. I think you're really onto something and I'd love to see the full build you come up with.
I did do the build for both the toilet paper roll in the past and the volleyball. Both of them turned out all right but didn't seem like they would last because the PVC finally cracked after maybe the 20th time I used it.
Yeah I think opens up a whole lot of possibilities. I’ll need to put some thought into the bottom section height adjustment so that I can test all different kinds of options. I’m also still keen to try it with a ball. Stay tuned brother 🤙🙌
Nice job! I have a cobra timing bag but I got bored and experimented around with various universal and pivot joints that I had lying about to try to mimic the synovial joints of the body. More specifically, I experimented with a parallel angled offset to the cobra neck (the parallel offset is achieved with two pvc angle joints connected by a short length of pvc pipe a universal joint can be attached to this. The net effect is to create a timing bag that mimics the erratic head, arm and kick movements of an opponent. This rotating offset can be placed above or below the spring to produce different effects. It can be flipped upside down. All are useful for training. In my case, I have it set up so that I can swap out straight and offset sections to get different motion from the same basic cobra. You seem like a curious and capable guy. I’m sure that if you gave this idea a try, you could perfect it into something really useful.
What happens when you add the offset with the pivot joint is that the offset and anything that is attached above it can freely rotate in a circle about the vertical axis. So when you punch the bag this swiveling action adds side to side and front to back movement on top of the front to back movement caused by the spring, the overall effect is to simulate the effect of a moving and punching opponent. Try it yourself and you will see.
@@Kewlus great thanks. So for $40 that includes the advertised spring, pvc and 2 foam noodles? What else would I need if I buy this the base? Was interested in putting a very light weight ball on top
I've detailed all the items you need here: www.fighterdiy.com/2020/10/how-to-make-boxing-cobra-punching-bag.html, for both cases: wether you buy the Top Section Kit or just the spring. I'm about to start testing putting a light speedball on top, so that video is to come. I'm also likely to release an inner spring as an option for those people who might have a heavier top.
This looks like the bag for me, my only issue is finding somewhere that sells galvanised steel pipes in the UK tried a few hardware stores but nothing the size I need
I’m subscribing you do great work :) would like item list so I can price up everything and get it ordered. Definitely let you know when I make either the spar bar. Or reflex bar maybe even both if I can afford it :)
What if you took one of the desk top speedballs punchingbag and take the suction cup off and put it on top to look more like the reflex cobra speedballs? I like that you make things at a more reasonable price!!😊👍🏻🖤
What about a regular punching bag speedball, it would still be way cheaper than $299 plus shipping and tax 😁 take care!!!! I like your thinking!!!!!!!!😊
If the spring was higher it would be even faster. I am more interested in the spring itself, like where to get one without buying a spring bar (need it for other projects). Does anyone know what type of spring it is and where can I get one or at least one close to it? And why is it such a mystery spring?
That's actually not the best type of spring for this application. Better spring would be one with space between the coils. Let me know if you find a good source.
Looks great, Im looking to build this one myself. For the power twister what would you recommend could i go even higher than 30/40kg or is 30/40 the best.
Reedy could you critique my build so far? I’ll use the imperial system since that’s how I got them and I don’t have a calculator right now. I have a 3 foot long aluminum tube with 1.5 diameter. Then inside that is the taped up handle of the power twister. Then on the other side there’s a 1 foot aluminum tube with 1.25 diameter. Then I have the speed bag on top. So far it think it’s good but how heavy would the base need to be to keep it in place?
@@Kewlus it’s a cheap fitness instrument that doesn’t really work but it contains spring in it … I have checked it’s spring it can be used and it just cost 3$ hardly
Hey Bob (Reedy) I Purchased A 30kg/66lbs Power Twister From Amazon.. & It Seems Too Stiff Upon My Initial Inspection. Upon Further Watching This Video And Looking A Bit Closer, It Appears You’re Using A Power Twister In The 20kg Range. Can You Let Me Know If I’m Correct Or Are My Eyes Not That Good At Working ?!?? Thanks
@@Kewlus Okay Then… I’ll Have To Finish It To See How Well It Operates Once It’s All Done. And Hopefully That’ll Work While I Wait On My Kewlus Cobra Bag (Pre Ordered) Full Kit To Come In. Thanks Haas... Keep Up The Great Work !!! 💯💪🏽🥊
@@Kewlus ill check an see, I'm new to the channel but have been thinking about how to do this for a while now.. i have the cheap everlast version and gonna do a break down an reconstruct lol 😆
Yo reedy please reply if u can, Will the power spring be used for the adjustable one? Because I need to order one and I am looking forward to build the adjustable one
Hey reedy hope you see this. I just wanted to let you know whenever you make the adjustable version of this I am going to make it myself. The reflex bags online are over priced and work just like this. How long until the adjustable version comes out
There's generally a small gap which I close by winding tape around the smaller pipe. Not sure of grade, but here's a link to one of them at the Bunnings shop where I buy them: www.bunnings.com.au/holman-15mm-x-1m-class-18-pvc-pipe_p4750046
@@Kewlus Thanks, after looking at that link, I'm pretty sure schedule 40 PVC is a bit thick. Supposedly it can telescope with a lot of force for a very tight fit, but I'd imagine you'd need grease and a mallet. It looks like the best American equivalent might be "class 200" PVC pipe. I'll have to go acquire some.
Thank you Mojo. I’d really appreciate if you could let me know your findings. The PVC pipes are a key material component of many of my builds. I just want to make sure people around the world and in particular in the USA can get the right ones.
@@Kewlus Hey thanks for your answer ! I did it it's a little better but I noticed an other worry: the post in a little moving in my umbrella base. I tried to make more pool noodle inside but all plastic from base is moving ... What is your round metal socket: did you have a link to buy it ? Or just the name to found it ? Thank you ! I'll purchase your metal spring when I fix all other worries to be sure.
@@Kewlus Thank's a lot again for your quick and efficient answer ! I found it in your commentary: "galvanised steel flange". In french "bride en acier" or "raccords de tuyauterie". You're so helpfull you deserve that we order to you the stuff Kewlus Spring (KS9) !
Hey Reedy, I made made my own version of this, following your instructions with a few tweaks. I have mine on an MDF board, and have just ordered some tent pegs to secure it in the ground (on the grass). Im thinking to get a 40kg or 50kg power twister now to make it even faster, do you think that would work? Thanks for inspiring us all
@@Kewlus thanks for your reply Reedy.. too much in the sense, that it was far too fast? Yes I would use perhaps a copper pipe rather than a PVC pipe and wrap some more noodles.. power twister is legit, I love it. Maybe I go for a 40kg rather than 50kg
@@beezybe7166 Any feedback on the difference between 40 and 50 kg? How did you use it? I'm trying to do this at my house and I'm having doubts between 40 and 50 kg
You could simply use a higher rated power twister like 40kg or more. I tested 50kg but that was too much. I’d say 30-40kg is best. Motorcycle spring would likely have too much tension. Anyway I’ve moved from using springs to using fibreglass poles like the fishing of one I made - soo much better! Fast, quiet, low cost.
what bag does ryan garcia and canelo use? Nobody can even answer that! They make cheap bags at the store... Im sure Ryan and Canelo have custom bags build for them that are not distributed! Boxing biggest secret!
The spring they use is different to those that most manufacturers use. I’m currently working with a spring manufacturer to see if I can come up with a similar or better spring
hey mate! just got a 60kg power twister and im worried its gonna be a bit to hard/rigid to work, what do you reckon? I pretend to use steel pipes on both ends of the cobra bag, and on the upper end use a soccer ball with a plunger attached! (i guess the build is heavier than this one, but enough to compensate 60kg?)
You just have to give it a try. I haven’t tried a spring heavier than 30kg, but with a heavier to like a ball I think it should work. You’ll need a super rigid base though. Possibly even bolt to the ground if possible. Good luck 🤙👌
Reedy Kewlus Thanks for the inspiration mate! I will be getting a 25kg umbrella base and if it isnt enough will put a 20kg olympic disk on the top! Keep up the good work brother
notpastrana pastrana It ended up being perfect! I used a steel galvanized pipe, a plunger and a football (soccer) ball and a shitton of tape, so it was heavy enough to have a really good action! Just to consider im holding my base with 4 25kg sand bags (i did my own diy base). Get it bro, My spring is slightly above hip height. If you want a vid of the action and final result dm me @andyescrich
Oh snap, I was just about to buy a cobra bag before I saw this video. It even looks more durable than everything on Amazon and way cheaper to build.
Go to fiercereflex.com. Very expensive but the real ryan garcia bag
If you're in the US, go to any hardware store and look for springs made for garage doors. About the same price as a power twister (maybe a little more) and longer so you have some wiggle room.
@@jlgtapout nobody wants to spend $500 let’s be honest bro😂
@@jlgtapout out of stock always
Double end bags are cheap and probably better kit to use. Cobra bags are good too but ridiculously over priced. Same as aquabags. It's just a bouy with logo painted on it
aw man! i thought i was the only one that thought of making one using this spring bar.. YOU'RE A GENIUS!
Oh yeah ✨💪🏽👊🏽🥰🤙🏽✨ just a few more refinements. Material upgrades, modification and BAMM!!! A awesome functional design! Going to make one myself!
I just repaired an everlast reflex bag that had a busted bladder thanks to your videos!! Keep it up!
thank you man!!! i dont have too much money and i was the same idea like you to do the cobra bag, and you do the cobra bag to easy and cheap in one video. nice👌
Saludos desde Mexico🇲🇽
This is pretty funny. I've thought about doing this years ago with those springs you see on garage doors. They come in multiple sizes and are typically 3 to 4 feet. Turns out they're either the same or more expensive than the power twisters lol.
Edit: Damn, it turned out sooooo much better than I thought. Great job dude 👍🏽!
I didn't finish looking at the video and I liked. And even you didn't get the job done you've earned all praises. Keep up the good work.
Thanks brother. Actually it turned out to be something else entirely! I think I just invented a Cobra Sparbar! 😂
@@Kewlus Congratulations, and Thank you for sharing your ingenuity. Cheers from NYC.
Reedy - Your builds are brilliant and I'd love a full build with instructions. Subbing now!
Thank you. That’s coming 👌
Me too
And yours actually has better swinging action than the Cobra reflex bag in my opinion.
This was super helpful man. I've been trying to figure out how to make a cheap cobra reflex bag. My old slow (bottom spring) Everlast reflex bag is old, rusted, beat to death. I'm still using it but it's basically a little bit of metal and 85% tape holding it together.
You live in 2050 man
he's a pretty smart guy.
Hahahahah
Not what I expected at all, he’s creative
not really. 50 years ago this how how the majority of people thought. they were creative and built things themselves rather than buying it for much much more money. Reedy is the last of a dying breed
This what ive been waiting for. Thanks for the uploas bro.
So glad I came across this page ! I got one of those springs at home 🙌🙌
Get into this brother! 🤙
I really like the idea of that kind of feedback and having to move from a punching bag. The pool noodles seem to be about the right kind of size to make sure you're accurate. The different colors could definitely be good for zones of practice.
Actually what I want to do is take that same build but bring the spring a little bit lower and use it for my Filipino stick practice. I think you're really onto something and I'd love to see the full build you come up with.
I did do the build for both the toilet paper roll in the past and the volleyball. Both of them turned out all right but didn't seem like they would last because the PVC finally cracked after maybe the 20th time I used it.
Yeah I think opens up a whole lot of possibilities. I’ll need to put some thought into the bottom section height adjustment so that I can test all different kinds of options. I’m also still keen to try it with a ball. Stay tuned brother 🤙🙌
I love this tutorial this dude smart asf I'm gonna make this
For this beauty... I have subbed...
Nice job! I have a cobra timing bag but I got bored and experimented around with various universal and pivot joints that I had lying about to try to mimic the synovial joints of the body. More specifically, I experimented with a parallel angled offset to the cobra neck (the parallel offset is achieved with two pvc angle joints connected by a short length of pvc pipe a universal joint can be attached to this. The net effect is to create a timing bag that mimics the erratic head, arm and kick movements of an opponent. This rotating offset can be placed above or below the spring to produce different effects. It can be flipped upside down. All are useful for training. In my case, I have it set up so that I can swap out straight and offset sections to get different motion from the same basic cobra. You seem like a curious and capable guy. I’m sure that if you gave this idea a try, you could perfect it into something really useful.
What happens when you add the offset with the pivot joint is that the offset and anything that is attached above it can freely rotate in a circle about the vertical axis. So when you punch the bag this swiveling action adds side to side and front to back movement on top of the front to back movement caused by the spring, the overall effect is to simulate the effect of a moving and punching opponent. Try it yourself and you will see.
@resilientfarmsanddesignstu1702 some interesting ideas there!
You are a BEAST 💪💪💪🔥!!!!!!! Keep them coming!!! From 🇨🇦🇨🇦🇨🇦...Respect!!!:)
Thank you 🙏
me too!!! I’m trying my make one myself but the base is my main issue now. Spent WAY too much on it by now lmao
Thank you
fuck me dead. this is the best cobra bag ive ever seen no lie lol
Freaking fantastic. Thank you 😊
That's genuis! Thank you!
Nice, very responsive refex bag
Your dog is cute as hell
I going to use the springs for the garage door
Good work Man i will try to do this! Thank you.
Sweet. That may be the best one
I like it now try putting another screen on the very bottom so it can wave around more..
You should post a document with all the parts and sizes you used.
That's coming soon. I'll do that once I finish testing prototypes. I'll also add it to my book, Fighter DIY.
NICE
JOB
wow good idea thanks broo
Thanks!
Thank you 🙏
I made our own base on this but we used spare used tire as base.
Loved this
Wow! Thanks man! This helps me a lot!
You’re most welcome 😉
Cobra noodle 👌🏽
Thx man brilliant idea, gonna try it out💪
You’re most welcome 🤙
Full build please
Coming up!!!
awesome video do the whole build! i subbed!
I want one
Awesome. I am about to get that spring and attempt yo build this. You should sell the man.
Check this one out before you buy a power twister: www.fighterdiy.com/2020/10/how-to-make-boxing-cobra-punching-bag.html
@@Kewlus great thanks. So for $40 that includes the advertised spring, pvc and 2 foam noodles?
What else would I need if I buy this the base?
Was interested in putting a very light weight ball on top
I've detailed all the items you need here: www.fighterdiy.com/2020/10/how-to-make-boxing-cobra-punching-bag.html, for both cases: wether you buy the Top Section Kit or just the spring. I'm about to start testing putting a light speedball on top, so that video is to come. I'm also likely to release an inner spring as an option for those people who might have a heavier top.
Keep up the good work. your too cool.
Man you must have conceived and given birth to yourself. So innovative.
Good idea thank you
You’re most welcome
@@Kewlus sir I used ur ideas started to use it. To improve kids hand eye coordination....
And kids r enjoying it.....
Awesome 👍
i currently try to make that in poland
This looks like the bag for me, my only issue is finding somewhere that sells galvanised steel pipes in the UK tried a few hardware stores but nothing the size I need
Let us know when you find them where others can look
@@Kewlus will do man, cheers for taking the time to reply
Got the same spring with u but 40kg as u recomended ..it seems pretty tough though and maybie i have to change it or put it to the vase
I'm truly impressed with your creative idea ! just wonder can that be added with spar bar ? May be difficult as spar bar work with still vertical arm.
Thank you. The spar bar needs to have a rigid mast, so the idea is to replace the top section components but you could use the same base
Would you recommend going with the 40kg or the 30kg for the spring? Anybody who has tried it with a 40kg?
HAVE BOTH 30 AND 40 KILOS.40 IS TO STIFF.30 WORKS FINE.WHAT YOU THINK ABOUT 20 KILOS POWER TWISTER? MAYBE WOULD WORK BETTER?
30kg is the one I tried and it worked quite good. I think 20kg might be too slow.
I mad one it so good i love it a lot
That’s brilliant! What strength power twister did you use?
Yes
This is so cool love boxing
On Amazon I only found the 20 and 40 kg power twister, which would be better?
if you go with 40kg you'll need to make sure your base is rock solid, but you'll get better rebound action
Ur crazy lmao i love you 🤣🤣🤣❤❤❤
Hey Reedy! Is it work with 50kg power twister with speedball on the top? Hugs from Brazil. 🤙🏽
Might work 🤙
I’m subscribing you do great work :) would like item list so I can price up everything and get it ordered. Definitely let you know when I make either the spar bar. Or reflex bar maybe even both if I can afford it :)
Check out some of the pre made components on my website: kewlus.com
how much kg of resistance for the power twister. thanks bro.
I used a 30kg one
move the spring higher up
Yep 👍
What if you took one of the desk top speedballs punchingbag and take the suction cup off and put it on top to look more like the reflex cobra speedballs? I like that you make things at a more reasonable price!!😊👍🏻🖤
Yes I tried it and it worked. However, my desktop bag broke after about 3 sessions - the material that it is made from is of poor quality.
What about a regular punching bag speedball, it would still be way cheaper than $299 plus shipping and tax 😁 take care!!!! I like your thinking!!!!!!!!😊
Yes that was in one of my latest videos ruclips.net/video/EU51IMrH3Ug/видео.html
Can you make not pool noodle but ball?
hey, can I replace metal pipes with PVC pipes?
Not the mast. The mast needs to be rigid
If the spring was higher it would be even faster. I am more interested in the spring itself, like where to get one without buying a spring bar (need it for other projects). Does anyone know what type of spring it is and where can I get one or at least one close to it? And why is it such a mystery spring?
That's actually not the best type of spring for this application. Better spring would be one with space between the coils. Let me know if you find a good source.
@@Kewlus Thanks man for responding, the search for a good source is on.
Looks great, Im looking to build this one myself. For the power twister what would you recommend could i go even higher than 30/40kg or is 30/40 the best.
I tried 50kg and it was too stiff. Go with 30 or 40kg.
Reedy could you critique my build so far? I’ll use the imperial system since that’s how I got them and I don’t have a calculator right now. I have a 3 foot long aluminum tube with 1.5 diameter. Then inside that is the taped up handle of the power twister. Then on the other side there’s a 1 foot aluminum tube with 1.25 diameter. Then I have the speed bag on top. So far it think it’s good but how heavy would the base need to be to keep it in place?
Sounds pretty good. Yeah a strong heavy base is the key. I’d recommend a heavy umbrella base or stand 🤙
@@Kewlus Thanks man
Hey buddy can we try tummy trimmer springs for the next project??
what is that?
@@Kewlus it’s a cheap fitness instrument that doesn’t really work but it contains spring in it … I have checked it’s spring it can be used and it just cost 3$ hardly
@Themedbeast that’s a different kind of spring that would not work.
Hey Bob (Reedy) I Purchased A 30kg/66lbs Power Twister From Amazon.. & It Seems Too Stiff Upon My Initial Inspection. Upon Further Watching This Video And Looking A Bit Closer, It Appears You’re Using A Power Twister In The 20kg Range. Can You Let Me Know If I’m Correct Or Are My Eyes Not That Good At Working ?!?? Thanks
It’s a 30kg one
@@Kewlus Okay Then… I’ll Have To Finish It To See How Well It Operates Once It’s All Done. And Hopefully That’ll Work While I Wait On My Kewlus Cobra Bag (Pre Ordered) Full Kit To Come In. Thanks Haas... Keep Up The Great Work !!! 💯💪🏽🥊
Good luck with the build brother 🤞👍🤙
Hi Ur awesome!!
can u use a ball at the top instead
Yep that’s next 👌
Do you have a video making the other reflex bag with different spring
Are you referring to this one: ruclips.net/video/SiQmlxbBXiw/видео.html ?
@@Kewlus ill check an see, I'm new to the channel but have been thinking about how to do this for a while now.. i have the cheap everlast version and gonna do a break down an reconstruct lol 😆
Cool 🤙
I almost watched all your videos. Just want to ask for the size of the GI pipe, is it 1 1/2 or 1 1/4 inch? Thanks
Not sure which pipe you’re referring to, but in most cases it’s the 3/4 inch pipe. Also check my website DIY posts: kewlus.com/blogs/diy
@@KewlusPipe for the base. Thanks
Yo reedy please reply if u can, Will the power spring be used for the adjustable one? Because I need to order one and I am looking forward to build the adjustable one
Yes brother 👌
Where do you get the steel pipe and flanges from mate
I get these at my local Bunnings which is a big hardware store chain in Australia
I want to buy a Power Twister for my homemade bag. What is the Strength of the Power Twister that you are using 30kg 40kg 50kg or 60kg?
30kg
Hey reedy hope you see this. I just wanted to let you know whenever you make the adjustable version of this I am going to make it myself. The reflex bags online are over priced and work just like this. How long until the adjustable version comes out
One more prototype next, then the full build. Ok I’ll show the adjustable version 👌
where did u bought your gloves man
Those blue ones I bought in a local shop bro
Which twister I should buy tell ?? 20kg or 40
Get the Kewlus PRO Spring instead brother 👌
@@Kewlus bro it is very overpriced
That includes express shipping bro
He's living in 2055..dude
Do you know what grade your PVC pipe is? The PVC pipes at my local home depot didn't fit inside each other and telescope.
There's generally a small gap which I close by winding tape around the smaller pipe. Not sure of grade, but here's a link to one of them at the Bunnings shop where I buy them: www.bunnings.com.au/holman-15mm-x-1m-class-18-pvc-pipe_p4750046
@@Kewlus Thanks, after looking at that link, I'm pretty sure schedule 40 PVC is a bit thick. Supposedly it can telescope with a lot of force for a very tight fit, but I'd imagine you'd need grease and a mallet.
It looks like the best American equivalent might be "class 200" PVC pipe. I'll have to go acquire some.
Thank you Mojo. I’d really appreciate if you could let me know your findings. The PVC pipes are a key material component of many of my builds. I just want to make sure people around the world and in particular in the USA can get the right ones.
Just move thr spring up more
what is the name of that foam you put?
Pool noodle
How wide is the mdf board?
Roughly 2 ft
Thank you man! I juste made one myself but I feel it too slow too. How did you finally speed it up ? Thank you !
Make a lightweight top using pool noodles or other foam material like here: ruclips.net/video/Au9ezuvtA3w/видео.html
@@Kewlus Hey thanks for your answer ! I did it it's a little better but I noticed an other worry: the post in a little moving in my umbrella base. I tried to make more pool noodle inside but all plastic from base is moving ... What is your round metal socket: did you have a link to buy it ? Or just the name to found it ? Thank you ! I'll purchase your metal spring when I fix all other worries to be sure.
Perhaps you could make a base like this: ruclips.net/video/kPiJ-fsDik0/видео.html
@@Kewlus Thank's a lot again for your quick and efficient answer ! I found it in your commentary: "galvanised steel flange". In french "bride en acier" or "raccords de tuyauterie". You're so helpfull you deserve that we order to you the stuff Kewlus Spring (KS9)
!
You’re most welcome 😃
Gobto fierce reflex bag. Com very expensive though its the real ryan garcia bag
Can I use 20kgs of Power Twister instead of 30kgs?
Yes but might be a little slower
How about 40kgs?
Might be a little stiff but I recon will still work
So 30kgs is the best for cobra?
That’s the one I tested and worked
Greetings sir! How many kg is the power twister?
The one I used is 20kg. You could also use 30kg
Hey Reedy, I made made my own version of this, following your instructions with a few tweaks. I have mine on an MDF board, and have just ordered some tent pegs to secure it in the ground (on the grass). Im thinking to get a 40kg or 50kg power twister now to make it even faster, do you think that would work? Thanks for inspiring us all
Awesome!! I tried 50kg power twister but it was too much for the pool noodle top. You may need to use a heavier top
@@Kewlus thanks for your reply Reedy.. too much in the sense, that it was far too fast? Yes I would use perhaps a copper pipe rather than a PVC pipe and wrap some more noodles.. power twister is legit, I love it. Maybe I go for a 40kg rather than 50kg
Yes with the 50kg you’d need something like a ball to make it flex. I recon 40kg is the way to go if using pool noodles. Let me know how you go.
@@beezybe7166 Any feedback on the difference between 40 and 50 kg? How did you use it? I'm trying to do this at my house and I'm having doubts between 40 and 50 kg
Sorry I used 30kg only, so can’t say what 40 or 50 would be like. I assume if you use a heavier ball it should still work
Will getting a lighter spring make it go fast than getting the 30 kg?
Speed depends on the size of the spring coils and the weight and length of the top section
Hey man if I use the 50kg would that be okay
I tried 50kg and it was too stiff
Reedy Kewlus thank you ! So would a everlast reflex bag ( ball part only ) be good for a 40kg
20 kg spring works?
I haven’t tried 20kg, so can’t really say
How do you call those colored thing?
Pool noodles
Hi sir thanks for the reply, is it possible you could use spring from the motorcycle. I think it’ll be faster. I hope you could make one🙏
You could simply use a higher rated power twister like 40kg or more. I tested 50kg but that was too much. I’d say 30-40kg is best. Motorcycle spring would likely have too much tension. Anyway I’ve moved from using springs to using fibreglass poles like the fishing of one I made - soo much better! Fast, quiet, low cost.
Reedy Geni(kewl)us!
😂😂😂😂
👍👍👍👍👍
Is a 20 kg power twister?
20kg may not be enough. Try 30kg or 40kg
@@Kewlus but if I make the cobra like the title? I mean whit the bar up like before the speed bag
👍🥊
man just make your own brand and manufacture in china for affordable price i know you can do it
who has actually tested this?
U where bending it like it was a joke.. 30kgs are not that easy are u sure about the twister?
😂😂😂 yes and I have a 40kg one too and can easily bend that as well 💪
what bag does ryan garcia and canelo use? Nobody can even answer that! They make cheap bags at the store... Im sure Ryan and Canelo have custom bags build for them that are not distributed! Boxing biggest secret!
The spring they use is different to those that most manufacturers use. I’m currently working with a spring manufacturer to see if I can come up with a similar or better spring
@@Kewlus it's very surprising none of these brand names can come up with a decent bag like Canelo uses
@@Kewlus where do you usually find coil springs? I didn't find the 50 kilograms to 60 kg spring that you mentioned
Yes I agree it’s very surprising
hey mate! just got a 60kg power twister and im worried its gonna be a bit to hard/rigid to work, what do you reckon? I pretend to use steel pipes on both ends of the cobra bag, and on the upper end use a soccer ball with a plunger attached! (i guess the build is heavier than this one, but enough to compensate 60kg?)
You just have to give it a try. I haven’t tried a spring heavier than 30kg, but with a heavier to like a ball I think it should work. You’ll need a super rigid base though. Possibly even bolt to the ground if possible. Good luck 🤙👌
Reedy Kewlus Thanks for the inspiration mate! I will be getting a 25kg umbrella base and if it isnt enough will put a 20kg olympic disk on the top! Keep up the good work brother
Thank you 😊
andres escrich how was the 60kg twister..was it too stiff?
notpastrana pastrana It ended up being perfect! I used a steel galvanized pipe, a plunger and a football (soccer) ball and a shitton of tape, so it was heavy enough to have a really good action! Just to consider im holding my base with 4 25kg sand bags (i did my own diy base). Get it bro, My spring is slightly above hip height. If you want a vid of the action and final result dm me @andyescrich
Thank you