Hi, I am seriously considering building something almost exactly like this, and I was wondering about a few specs of yours. First, if possible, do you have plans for it? If so I would greatly appreciate them. If not, that's okay. Anyways, what is the rear axle length? And can I get all of the necessary parts for it in a kit somewhere or are they seperate pieces? Also, may I ask what engine and torque converter you used? I am hoping to use a predator 301cc engine, but I am not sure what the best torque converter would be for it. And finally, did you use some sort of steering assembly kit? If so, where can I find it? And one final note, would you say the front suspension is good? Does it do much? Because if it doesn't do a whole lot I might just do rear suspension to save some money. Thanks a lot, I really love the video! Keep up the great work!
the flex pipe off old chevy 6.0 exhast blot right on to the exhaust on that motor with just a little drilling,i did that for the motor on my gasbike cause i needed a lower profile
Can someone tell me what frame this is? Or did you build it from scratch? I am seriously considering building something like this and that frame is absolutely perfect
We have the same chassis and the sprocket is eaten up pretty bad! Needs replacing and the newer available sprockets are larger and will hit the frame. How is you sprocket looking? Shark-finned yet?
My entire was axle bent actually. It had a 35 tooth, But I'm going to put a 48 tooth, it will be a torque beast. I'm moving the disk brake from it being attached to the engine plate over the sprocket facing out, to the outside of the frame but still facing in.
Ouch @bataha ! My wheels rust welded themselves and am having a hard time removing the rear axle to replace the sprocket. Planning on getting a 48 tooth as well but where the engine plate is located relative to rear axle placement may not allow for that size. Cutting/welding here we come! Ouch haha
I have the same frame but I modified it and put a 670 predator. Upgraded the wheels with 14in golf cart wheels on the back and 12in on the front. Nice!
Welding is a great way to get subscribers. I've been wanting to buy some equipment & start welding. Do you watch Vasily Builds? He said when he started welding & creating things his channel took off...
Yeah I’m subbed to him. Welding is not to hard to get stuff to stick tighter but to make it nice takes a lot of practice. People really like custom build and unique go karts they just take awhile to build.
@@Bataha For Sure, If you do custom builds people will WATCH & LOVE a channel. I've been looking at Craigs List & at Harbor Freight. Looks like you can weld. Keep it up.
Im gonna build one when i save up some money, nice vid!!
Same here but it’s gonna be a pain bc I don’t know everything I need to do but I’ll figure it out
How’s it coming along?
Yessir. The part where the back of the cart just came apart when you hit it with the red part was hilarious.
😅😂
This would be cool, if I could build it...
I Will take this go kart to school 😅
Hi, I am seriously considering building something almost exactly like this, and I was wondering about a few specs of yours. First, if possible, do you have plans for it? If so I would greatly appreciate them. If not, that's okay.
Anyways, what is the rear axle length? And can I get all of the necessary parts for it in a kit somewhere or are they seperate pieces?
Also, may I ask what engine and torque converter you used? I am hoping to use a predator 301cc engine, but I am not sure what the best torque converter would be for it.
And finally, did you use some sort of steering assembly kit? If so, where can I find it?
And one final note, would you say the front suspension is good? Does it do much? Because if it doesn't do a whole lot I might just do rear suspension to save some money.
Thanks a lot, I really love the video! Keep up the great work!
He’s selling it
Sorry I don't have plans. Axle length is 40in, engine predator 212 generic amazon torque converter. steering is stock, front suspension didnt do much
If you dont mind me asking how much did it cost you for everything I'm looking to build something relatively cheap
$750ish
The only gripe about this kart is how short the steering stem is. Maybe I just have short arms😂🤨
I agree it, was a few inches to short for me.
the flex pipe off old chevy 6.0 exhast blot right on to the exhaust on that motor with just a little drilling,i did that for the motor on my gasbike cause i needed a lower profile
This has to be Vasily builds little brother
Haha
Me encantó el coche, tengo una pregunta como empezaste el coche y como hiciste para poner las ruedas Para que giren?
I wish the beat was in the description. It go kinda hard
Demolitia represent!
Get a respirator homie keep yourself safe while you lay those beads
Can someone tell me what frame this is? Or did you build it from scratch? I am seriously considering building something like this and that frame is absolutely perfect
Look up "murray hard drive go kart"
We have the same chassis and the sprocket is eaten up pretty bad! Needs replacing and the newer available sprockets are larger and will hit the frame. How is you sprocket looking? Shark-finned yet?
My entire was axle bent actually. It had a 35 tooth, But I'm going to put a 48 tooth, it will be a torque beast. I'm moving the disk brake from it being attached to the engine plate over the sprocket facing out, to the outside of the frame but still facing in.
Ouch @bataha ! My wheels rust welded themselves and am having a hard time removing the rear axle to replace the sprocket. Planning on getting a 48 tooth as well but where the engine plate is located relative to rear axle placement may not allow for that size. Cutting/welding here we come! Ouch haha
@@raabusmc yeah! My hanger plates are so messed up so I’m welding a bracket and putting a pillow block bearing on each side.
What model is the buggy please
I have the same frame but I modified it and put a 670 predator. Upgraded the wheels with 14in golf cart wheels on the back and 12in on the front. Nice!
I wanna see pics. I had the same idea but I’d like to see it done.
What arc welder u using?
It's a Lincoln Electric Handy Mig Welder
@@Bataha nice
Welding is a great way to get subscribers. I've been wanting to buy some equipment & start welding. Do you watch Vasily Builds?
He said when he started welding & creating things his channel took off...
Yeah I’m subbed to him. Welding is not to hard to get stuff to stick tighter but to make it nice takes a lot of practice. People really like custom build and unique go karts they just take awhile to build.
@@Bataha For Sure, If you do custom builds people will WATCH & LOVE a channel. I've been looking at Craigs List & at Harbor Freight. Looks like you can weld. Keep it up.
how much did it cost to do
das tuff, how much are parts for it?
Parts are pretty cheap
Nice bataha
yuh
Nice build...enjoyed the vid...😎
Could you please tell me the steel bar diameter and all the dimension of the kart??
Please can you tell me all the dimension and chassis frame thickness 🙏🙏🙏
what engine did you put inside it
predator 212
Theres a bolt on the axle to move sprocket over... Go power sports
Bataha, me gusta tu juguete bro, promete diversión
love the vids man
Thank You!
Hey keep up the great work
When did you say the mini bike vid coming
@@fissureplays860 tomorrow or Wednesday
Damn that music at 11.00
ez valami titkos projekt hogy éjszaka tolod? :-)))))))))))))))))))))))
Whaddup bataha
Yo
Heck Yeha!!
Yessir
I would race you on my buggy but that would not be fair lol, cool little kart though.