Hi I'm having issues getting the nodes to start in EVE-NG Lab, the problem in "Cisco vIOS" and "Cisco vIOS L2", Note--->"Cisco ios 7206VXR " is working properly on/off but. I want to run all nodes as in default topology(Cisco vIOS), a snapshot is given below. all node not ON, it shows ON but after some time it becomes OFF. Specification-->i set 40 HDD and 64GB RAM and 8vCPU for 24 nodes in topology , vSperClint enviromant
I could see each node has 1G RAM. So if I want to have to topology which comprises 16 nodes I need to have 32G ram laptop or is it possible to manipulate the RAM occupied per node?
Hi, thank you for these videos, they are VERY helpful. Question, is it possible to make node connections while the nodes are powered on? I noticed when nodes are powered on the connector plug disappears. Thanks again!
I have the same question. How can I edit the interfaces when the device is powered on and the 'Edit Interface' is not showing up. Or does it have to do with Image versions of the devices. Thank you
Hi, I have things running fine - but one thing I find when I run a recommened IOL, is that if I no shut a n UNCONNECTED l2 or l3 port, it shows up/up when it should be down as nothing connected. Is this a bug? thanks
it is specific of virtual image, no one of virtual images support Layer 1, so this is image issue only it will be always up/up, no such state as operational down It is not EVE, but image
I have follow the installation video instruction, and this first lab video but I cannot select any node type but Virtual PC. I think there is one step missing. Could you please help us to figure out what else should I do to add other nodes? Thank you!
EVE itself does not come with images. It is vendor/license protected. Obtain images yourself and load it using our how to www.eve-ng.net/documentation/howto-s
Hello There, I have set a basic lab with Palo alto firewall and win 7 machine, However when i click on start to play he node, it just starts for 5 seconds and then automatically turn down and stops. What could be the issue here. I have i3 processor laptop with 12GB Ram. is this not sufficient?
Sir, i could not able to see the interface name like fa0/0 more than twice. Ex if i choose 4 nodes so only two routers show fa0/0 interface and if i try to connect the interface with the same router. So it connects but not showing fa0/0 interface name. So how to see those interface names.
How to get that ova file ? I can't find the download page from developer.cisco.com www.eve-ng.net/index.php/documentation/howto-s/67-howto-add-cisco-vios
Ah vou meter um português mesmo aqui: Sensacional isso em, parabéns a todos os envolvidos.
how do you use multi-tab in secure-crt when using eve?
how to activate the node category ? is there a file contain all of those images ??
One question on this..I have added csr1000v to EVE, but when I connect to IOU switches, the interface remains down. Why? Is there a solution?
Hi
I'm having issues getting the nodes to start in EVE-NG Lab, the problem in "Cisco vIOS" and "Cisco vIOS L2", Note--->"Cisco ios 7206VXR " is working properly on/off but. I want to run all nodes as in default topology(Cisco vIOS), a snapshot is given below.
all node not ON, it shows ON but after some time it becomes OFF.
Specification-->i set 40 HDD and 64GB RAM
and 8vCPU for 24 nodes in topology , vSperClint enviromant
I could see each node has 1G RAM. So if I want to have to topology which comprises 16 nodes I need to have 32G ram laptop or is it possible to manipulate the RAM occupied per node?
Hi, thank you for these videos, they are VERY helpful. Question, is it possible to make node connections while the nodes are powered on? I noticed when nodes are powered on the connector plug disappears. Thanks again!
I have the same question. How can I edit the interfaces when the device is powered on and the 'Edit Interface' is not showing up.
Or does it have to do with Image versions of the devices.
Thank you
When I create a lab and save it. How do I create another one. Do I just create it in the same window I created the first one?
Hi, I have things running fine - but one thing I find when I run a recommened IOL, is that if I no shut a n UNCONNECTED l2 or l3 port, it shows up/up when it should be down as nothing connected. Is this a bug? thanks
it is specific of virtual image, no one of virtual images support Layer 1, so this is image issue only
it will be always up/up, no such state as operational down
It is not EVE, but image
I have follow the installation video instruction, and this first lab video but I cannot select any node type but Virtual PC. I think there is one step missing. Could you please help us to figure out what else should I do to add other nodes? Thank you!
EVE itself does not come with images. It is vendor/license protected. Obtain images yourself and load it using our how to
www.eve-ng.net/documentation/howto-s
Hey, how can you connect nodes when they are Power ON ? I can't even connect PC while they are turning ON ?
Hello There,
I have set a basic lab with Palo alto firewall and win 7 machine, However when i click on start to play he node, it just starts for 5 seconds and then automatically turn down and stops. What could be the issue here. I have i3 processor laptop with 12GB Ram.
is this not sufficient?
Hi, i want to draw tunnels of DMVPN in EVE Network. How do take it?
It's How to do it, not how to take it?
Sir, i could not able to see the interface name like fa0/0 more than twice. Ex if i choose 4 nodes so only two routers show fa0/0 interface and if i try to connect the interface with the same router. So it connects but not showing fa0/0 interface name. So how to see those interface names.
Is there a way to connect devices while they are powered up?
Yes EVE-PRO does it
how to do serial interface?
Like
How to add serial port in router?
Where can I find the node to download
please ..when i want to select add new not it refuse selecting it whey ?
Images are not loaded:)
thank u for replaying ...i have images but i dont know how to load it ...is there any video express that ?
Without visit our web, you will not get it up:)
www.eve-ng.net/index.php/documentation/howto-s
How to get that ova file ? I can't find the download page from developer.cisco.com
www.eve-ng.net/index.php/documentation/howto-s/67-howto-add-cisco-vios
plz help failed to start node (12) eve-ng
Image is incorrectly loaded
when i start a nod, o got "Failed to start node" msg
i am also facing this same problem, did you got the solution ?
If you have installed the IOS then you need to run the wrapper command to tidy permissions
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
and if you have put a .bin file in, then it needs to be uncompressed to .image to work