What's flavour like on these coils? When I bought a 5m roll of wire pre made alien wire it pretty much ruined the flavour so I've never messed with it. Any advice is much appreciated :)
Michael Butler any time you buy that premade Chinese wire garbage you get what you pay for. Prebuilt coils made by a local builder are totally different. And yes the flavor is amazing
Thanks for the response. It was dynas wire. I'll attempt wire builds in the next few weeks. Apparently fused clapton is good for beginners, would you agree.
I’ve been building coils for over a year. Just never made wire. Been using a drill to straighten all my wire since my first build. I’ve got loads of wire, just needed 36 gauge. Got a vice and most types of pliers. Very patient with this sort of stuff as well :) Keep up what you’re doing. Your content is amazing 😁
Dude, love your channel. With the help of your videos I've gone from never having made a coil to claptons, fused claptons, framed staple and now alien fused claptons... in one week. The enigma is set in my sights. Thank you so much!
I honestly went through 90 feet of wire and 12 or so hours before building my first successful alien. Now I zip it with no issues.. happy building guys!!
I've loved hometown hero juice since I started vaping. 2 yrs ago I bought a Kanger tech starter kit and a 50ml bottle of rice crispy treats. Never turned back and my wife and I haven't had a cigarette in 9 months. Thanks for your time and effort hohms
Wish I had seen this video before I butchered some wire last night. Was my second time attempting alien wraps I would get a small section perfect then another as a mohawk. Gonna have to give this method a try next time. Keep up the great videos.
U explain the methods perfectly for beginners like me, making my own coils. It is quiet difficult to get all the kinds off coils u can make, and the tools u can us for it. So thanks, it's make it for me easier to understand because, maybe u noticed it already, that English is not my daily language.
Omg. Thank you. I'm building a jig now to spin wire. Gonna need to grab a tonne of wire, a good swivel, and a pack of them rubbercoated paper clips!!!!
I found something new indeed I am always looking for new excitement in fresh ideas I like copper as my medium and with the stuff I saw here you have my attention As a real artist in this craft and for real one artist to another I will like hearing more of this freshness in exciting new ideas For sure i will crush the bell 🔔🔔🔔🔔🔔🔔🔔 see you soon my friend
The easiest way i found is to wet your fingers and stretch it till u feel that its not springy great vid bro lil practice u will be able to make it in under 10 min
Another little tip for everyone that watched this video that he didn’t mention. If your alien has the perfect S shape when your wrapping it, the alien wire will hold the cores together in a line making it so you don’t need a paperclip or anything else to keep your cores together.
So those 3 cores are already claptoned that u made with the 26 n 36? How do u choose which ribbon alien size wire to use? Are most ribbon alien the same gauge?
Hi Sherlock, greetings from Germany. I have a big problem with the decore wire. He twisted extremely between the guiding hand and floor. It is really pain in the ass. I'm talking about stretching method and decore wire 38 Gauge and less.(40, 42 Gauge ) Core Wire 3x 29-33 Gauge. Sometimes Fraliens . Have you any Idea ? Please not the NO STRETCH METHOD. Sorry for my farmer english Kind regards Sven
blood svente ich stehe genau vor dem selben problem. der manteldraht verknotet und verstrickt sich, während ich den kern füttere. fused claptons mit 42ga sind absolut kein thema aber bei diesen scheiss aliens wachsen mir bald noch weisse haare!
Nimm Deinen gestrechten Manteldraht und Wickel ihn locker auf eine Leerspule auf. Ich hatte noch eine von Zivipf , die schwarzen. Dann tust Du die Spule in einen Zipper Beutel ( z.B. von Toppits , Größe 150ml, hat genau die richtige Größe für die Zivipf Spule , die kann sich dann im Beutel noch frei mit drehen) . Den zipper Beutel machst Du dann soweit zu das die Rolle nicht raus kann. Der Draht muß natürlich raus und an Deine Seelen befestigen.Das ganze läßt Du dann zw.den Beinen auf dem Fußboden liegen. Das ganze , mit oben genannten Materialen ist schwer genug um den Draht nach unten hin gerade zu halten . Aber auch nicht zu schwer das es Dir Deinen Strech versaut, wenn der Beutel mal ein paar cm vom Boden abhebt bevor die Rolle wieder Draht nachgibt. Zumindest bei 0.1er . Habt gerade getestet und hat super geklappt. Nicht einmal verknotet. Falls Du noch Fragen hast, send mir Deine email und ich schick Dir nen Foto davon.
So there is special kind of wire that form like zigzag? What does it called? I am new btw, and most of what you saying is out of my vocab, but thanks for opening a new world for me.
@@SherlockHohms Give me your top 3 not to niche(commercial ones) and what style coil, dual,tri, quad claptons? by the way I currently have a Thelema 200W mod with DR v3, dual 0.37 ni80 & I don't know what to do with it, it's not good.
I want to nail the no stretch I have regular aliens down and did before I bought patinos alien makers which help tremendously for the prefect tension and making aliens at drills full speed without stopping
How do u put that lip or l bend in ur coils? ..i wrap my own from wire i buy and i have the engine 2 which leads need to be at same height so they need that perfect bend!
Here is a silly question! Which end of the decore do you start with? The end with the 1 inch tag or the start of the decore closest to the drill when you wrapped it?
Awsome tutorial but can i kmow what device you were firing and wicking you coils on, like not the rda but the ohm actual device it was screwd into? i really want one. Thanks
So for the no stretch you stretch a small section, wrap around the part sticking out of the chuck and the tension on the decore from your fingers will wrap itself? So keep applying tension until the wraps align?
Sherlock Hometown Hero!! Cool. I'm still learning to make different types of coils. The best I've made so far are sfc's and staples. I'm just really used to workinh off the spool instead of by hand. Thx for the reponse and all tutorials you rock dude.
subd! clean AF build bro. and hands down the most info givrn on said build. iv been wanting to tackle aliens for awhile. iv built everything but aliens so far. even multicore staggered fused but this seems way better then stretching oncr you learn the pinch. thanks bro!
just got into the vape world, enjoy your tutorials. I have built a couple wire clamps that fit into a 3/8" chuck, would you be interested in viewing one?
Chris Parks Wouldn't 100% pure VG make more sense? Obviously not if you don't have any lol. I suppose a high VG liquid you ain't going to vape is better than doing it dry.
Yea vg works too if ur a diy. I just use shitty juice I'm not gonna vape ever. Works better than water because it doesn't evaporate as fast, and more surface tension one it
Check resistance before you get started? I know what you mean but I think that's been my struggle some times. As learning, not sure what wire gauge and chem combination will give you the resistance you want. Easy with single wire builds and such, not sure if there's an app that will estimate the resistance of "exotic" coils. I just wing it and if it's not the resistance I want then I do it again with other gauges or wire chems.
RCBound there are some good apps for checking estimated resistance. They have functionality for exotic builds as well. You’ll waste way less wire and be much safer if you learn the principles of ohms law
Sherlock Hohms thanks for the reply. I have an AAS of electronics tech so I'm well aware of ohms law. I didn't know there was an app to estimate alien wire builds and such. I know steam engine does twisted wire and asks for the pitch. Hope your move has gone well, just bought a house myself and in the process of revamping before moving in.
I think the biggest revelation for most people watching this will be that the first clapton wrapped wire you make is the springy looking wire that eventually makes the alien wrap around the regular round wires.
Sois he vjust wrapping 36 ribbon around 26 core wires or is he making 3 Clapton's(26-36) then using ribbon around already claptoned wire? Thats where he lost me..Thank you so much 😊👌
@@michaelcard9382 he’s not using ribbon wire at all. It’s round wire wrapping in this build. If you use ribbon wire to wrap like an alien-style it’s called “tsuka”.
how to you use your drill? i see it is still spinning while you are moving the paperclip, but also still holding your decore. three hands? or do you have a way to make the drill go without pressing the button?
I lost my shit when the santa hat came in 😂😂😂 gunna give this a shot right now, going to buy a new drill since i believe that's why my cores are collapsing since the jawls have a gap in the middle
What i meant was the drill i was using had the space in the middle cause it was an old ass drill. The new one i bought the day i commented on this had no space between the jawls
I could use some help im not build coils but getting into rebuilding going tp an rta i like higher resistance so i can run at lower wattage like alien fused Clapton going to b in dual coil rta just bought creed rta what resistance and inner diameter to get to .3 resitance in dual mode
When you're wrapping your decore does it matter what end you start with? Meaning are you starting with the end you left the tail on in the drill? Hope this makes sense
Sherlock Hohms I was worried about that one myself and started all over. But now I know better. Without you and all the other awesome builders I would be so lost! You guys are so awesome and giving with the knowledge that you all bestow upon us. I myself am truly grateful. I knew here. (2 building) but you guys teach us beginners the coil gospels like we are all equals. You guys kick so much a$$!
tension will help, I normally run my wire from the drill to a swivel at the end of my desk clipped onto a c clamp even when using the daedalus coil jig, especially if I am going to clapton a 3 or 4 core clapton. Hope this helps
I’ve only ever used the no stretch method. Never seem to manage a descent pair though. But happy when it comes together. I have always wrap in the same direction. Might be why I don’t manage any good lengths. Thanks for the advice. Very helpful.
You no need to use any tricks because fused clapton is just the regular clapton with 2 cores you can use the regular wire from your spool without stretching or no-stretching...
I can do no stretch for dual core 24 aliens but for 3 x 26 cores i usually way understretch a bit so i can put less tension on the wire. I use lego for support. Ill need to try paperclips
My problem when I first started was getting the angle right I was not far enough my biggest advice would be to with a big angle when your first starting so you at least get a coil then as you learn you can get better with the angle
Sherlock Hohms it took me three attempts before I got it good enough to get two coils out of 18 inches of wire I did get a coil out of my first 3 attempts maybe took me ten attempts to do a whole stick with no fuck ups now I can just go thru them, I do need better swivels I just build for me so I don't have to buy coils so I'm kinda cheap so the swivels I had were ok but need to invest in some better ones
Andres Rivero Vazquez yep. So tempco is a brand just like kbees, lightening Vapes, kidney puncher. Each offer different types of metals like kanthal, Nichrome, and stainless steel. You can mix different metals from different brands as long as you understand that doing so will make predetermining your resistance much harder. So I recommend sticking with the same metal at first, especially if you’re a beginner. Did that help?
Sherlock Hohms Sure thing! thanks! I posted in another of your videos about the omhmage of the alien coils in dual and what type of battery do you use in mechanical mods?
Do you have any alien tips and tricks?? I’d love to hear about them! Let me know in the comments!
What's flavour like on these coils? When I bought a 5m roll of wire pre made alien wire it pretty much ruined the flavour so I've never messed with it. Any advice is much appreciated :)
Michael Butler any time you buy that premade Chinese wire garbage you get what you pay for. Prebuilt coils made by a local builder are totally different. And yes the flavor is amazing
Thanks for the response. It was dynas wire. I'll attempt wire builds in the next few weeks. Apparently fused clapton is good for beginners, would you agree.
Michael Butler start with claptons. Have you built anything at all yet?
I’ve been building coils for over a year. Just never made wire. Been using a drill to straighten all my wire since my first build. I’ve got loads of wire, just needed 36 gauge. Got a vice and most types of pliers. Very patient with this sort of stuff as well :) Keep up what you’re doing. Your content is amazing 😁
Still watching these in 2024! 13 years of vaping and still learning how to build an alien coil
Thought I was the only one
Dude, love your channel. With the help of your videos I've gone from never having made a coil to claptons, fused claptons, framed staple and now alien fused claptons... in one week. The enigma is set in my sights. Thank you so much!
I honestly went through 90 feet of wire and 12 or so hours before building my first successful alien. Now I zip it with no issues.. happy building guys!!
I've loved hometown hero juice since I started vaping. 2 yrs ago I bought a Kanger tech starter kit and a 50ml bottle of rice crispy treats. Never turned back and my wife and I haven't had a cigarette in 9 months. Thanks for your time and effort hohms
Thanks for the video..ive attempted and gave up so many times.. then watched you video and finally got it
Wish I had seen this video before I butchered some wire last night. Was my second time attempting alien wraps I would get a small section perfect then another as a mohawk. Gonna have to give this method a try next time. Keep up the great videos.
U explain the methods perfectly for beginners like me, making my own coils. It is quiet difficult to get all the kinds off coils u can make, and the tools u can us for it.
So thanks, it's make it for me easier to understand because, maybe u noticed it already, that English is not my daily language.
This is the closest thing to a truly wholesome vaping channel I’ve run across. I appreciate you.
Thanks! I appreciate you!!
After approximately 7 hours, i finally did my first coil build and it was alien coil. Lol.
Thanks Sherlock!!! :D
Source you’re welcome!! Congrats man!!
Omg. Thank you. I'm building a jig now to spin wire. Gonna need to grab a tonne of wire, a good swivel, and a pack of them rubbercoated paper clips!!!!
You're badass Sherlock I like your tutorials I bought a few coils off you about 4 months ago and I got to say they all last a long time
youre badass!
Awesome video dude..just wrapped some nice clapton to alien up tomorrow..first crack at it, thanks for the advice
What kind of cutters should i buy, i ordered some premade coils like this , what nrand of cutters should I get
We just wanted to stop by and say thank you for your video! Keep it cloudy!!!
Just knocked out a beautiful set of them 2nd try with this video! 10/10 thumbs up
Could you tell me the swivels that you used here or that you are using right now if you switched
Dalm bro you make it look so easy I know if I tryed it I would have hundreds of problems
what sort of build would you recommend for 24g kanthal and 31gage kanthal
I found something new indeed I am always looking for new excitement in fresh ideas
I like copper as my medium and with the stuff I saw here you have my attention
As a real artist in this craft and for real one artist to another I will like hearing more of this freshness in exciting new ideas
For sure i will crush the bell 🔔🔔🔔🔔🔔🔔🔔 see you soon my friend
The easiest way i found is to wet your fingers and stretch it till u feel that its not springy great vid bro lil practice u will be able to make it in under 10 min
Another little tip for everyone that watched this video that he didn’t mention. If your alien has the perfect S shape when your wrapping it, the alien wire will hold the cores together in a line making it so you don’t need a paperclip or anything else to keep your cores together.
hi I wanted to ask where should I buy the wires and what brands?
I’m trying this tomorrow night. Thanks mr Ohms
What swivels do you recommend and how many do use
Great! Exactly it's information i need. This tutorial help me better than some videos in my country. Thanks so much!
So those 3 cores are already claptoned that u made with the 26 n 36? How do u choose which ribbon alien size wire to use? Are most ribbon alien the same gauge?
Do you think there is an improvement of the flavor using this coil comparing to framed staple or multi-core x3 fused clapton?
thank you for the video
Ali A you’re welcome. Definitely, there is something about the alien pattern that amplifies flavor
hi can you tell me where did u buy your swivel from?
Is this the best coil for flavor?
Alien Coil 3*27/36 0.22Ω
will fit in the Asgard mini rda?
the paperclips and ,,the no stretch method,, ...........work the best for me.....simple and perfect :D....thank you for tips
Hi Sherlock, greetings from Germany.
I have a big problem with the decore wire. He twisted extremely between the guiding hand and floor. It is really pain in the ass.
I'm talking about stretching method and decore wire 38 Gauge and less.(40, 42 Gauge ) Core Wire 3x 29-33 Gauge. Sometimes Fraliens .
Have you any Idea ? Please not the NO STRETCH METHOD.
Sorry for my farmer english
Kind regards
Sven
blood svente
ich stehe genau vor dem selben problem. der manteldraht verknotet und verstrickt sich, während ich den kern füttere.
fused claptons mit 42ga sind absolut kein thema aber bei diesen scheiss aliens wachsen mir bald noch weisse haare!
Hi XXXL, schön das ich nicht der einzigste bin. Komisch nur das niemand das mal erwähnt von den coil- Mastern.
Interesse an einer Lösung ?
blood svente
klaro, immer her damit. hab es ebe geschafft 4cm fehlerfrei hinzukriegen und dann hing der manteldraht an meiner jeans fest 😄
Nimm Deinen gestrechten Manteldraht und Wickel ihn locker auf eine Leerspule auf. Ich hatte noch eine von Zivipf , die schwarzen. Dann tust Du die Spule in einen Zipper Beutel ( z.B. von Toppits , Größe 150ml, hat genau die richtige Größe für die Zivipf Spule , die kann sich dann im Beutel noch frei mit drehen) . Den zipper Beutel machst Du dann soweit zu das die Rolle nicht raus kann. Der Draht muß natürlich raus und an Deine Seelen befestigen.Das ganze läßt Du dann zw.den Beinen auf dem Fußboden liegen. Das ganze , mit oben genannten Materialen ist schwer genug um den Draht nach unten hin gerade zu halten . Aber auch nicht zu schwer das es Dir Deinen Strech versaut, wenn der Beutel mal ein paar cm vom Boden abhebt bevor die Rolle wieder Draht nachgibt. Zumindest bei 0.1er . Habt gerade getestet und hat super geklappt. Nicht einmal verknotet.
Falls Du noch Fragen hast, send mir Deine email und ich schick Dir nen Foto davon.
So there is special kind of wire that form like zigzag? What does it called? I am new btw, and most of what you saying is out of my vocab, but thanks for opening a new world for me.
if I'm into flavor & decent cloud, what system is right for me, RTA, RDA or RDTA?
If you can build go with rda or rta I'd stay away from the rdta. They can be pretty finicky
@@SherlockHohms Give me your top 3 not to niche(commercial ones) and what style coil, dual,tri, quad claptons? by the way I currently have a Thelema 200W mod with DR v3, dual 0.37 ni80 & I don't know what to do with it, it's not good.
They are stunning you make it look easy lol
I want to nail the no stretch I have regular aliens down and did before I bought patinos alien makers which help tremendously for the prefect tension and making aliens at drills full speed without stopping
What would you say are best coils for flavor i use a hellvape single deck rda and a rebirth rta tank
You can't beat a 3core stainless alien. 24/26 x 36/38/40
How do u put that lip or l bend in ur coils? ..i wrap my own from wire i buy and i have the engine 2 which leads need to be at same height so they need that perfect bend!
Here is a silly question! Which end of the decore do you start with? The end with the 1 inch tag or the start of the decore closest to the drill when you wrapped it?
Awsome tutorial but can i kmow what device you were firing and wicking you coils on, like not the rda but the ohm actual device it was screwd into? i really want one. Thanks
very interesting well done there was a spot on that alien that was a little bigger spaced than the rest would you un do that spot or just go with it?
If I was selling it, it would get scrapped. If it was for personal use I’ll use the mess up
what swivels do you use and where can i get them?
hello can an alien coil be used for series mode? im using 3mm guide how many loops should i use? thank you for answer
What is the size of that barrel swivel with split rings?
its a 800lb i think.
So for the no stretch you stretch a small section, wrap around the part sticking out of the chuck and the tension on the decore from your fingers will wrap itself? So keep applying tension until the wraps align?
Have you used an empty spool for your Aliens? If so can you do a video.
Nicholas Hamilton I don’t use an empty spool for aliens, I’ve found it usually causes more issues with tangling and stuff like that
Sherlock Hometown Hero!! Cool. I'm still learning to make different types of coils. The best I've made so far are sfc's and staples. I'm just really used to workinh off the spool instead of by hand. Thx for the reponse and all tutorials you rock dude.
hey buddy, i was wondering what kind of swivels do you use? and where can i get them?
So you used kanthal 32 wire for Clapton and 26 g stainless for cores ?
Most excellent Hohms. Click, click and click! Keep them rolling, really enjoyed.
@sherlock hohms
I can’t find those two ring large swivels you are using
What size and brand?
Where can I get those!?
Hi sir what is the atomizer you use
what rda are you using?
Mate what swivels are those? They are like butter!
Krok
subd! clean AF build bro. and hands down the most info givrn on said build. iv been wanting to tackle aliens for awhile. iv built everything but aliens so far. even multicore staggered fused
but this seems way better then stretching oncr you learn the pinch. thanks bro!
I need to do a good swivel setup because every time I free hand it i get a twist and it sucks.
just got into the vape world, enjoy your tutorials. I have built a couple wire clamps that fit into a 3/8" chuck, would you be interested in viewing one?
charles annable that sounds interesting for sure
charles annable I would like to view them please and thank you.
Always amazing tutorials Kenny!
thanks herb!
Great vídeo thankU! Wich swivels you use?
Put a drop of crappy eliquid on your tension fingers, and rip your drill at full speed, sounds like terrible advice, but it works great for me
Chris Parks you’re actually 100% correct. The motion and speed help with consistency
I actually use a variation of this to space clapton ribbon stacks. It doesnt work flawless everytime unless I use 100% VG
Chris Parks
Wouldn't 100% pure VG make more sense? Obviously not if you don't have any lol.
I suppose a high VG liquid you ain't going to vape is better than doing it dry.
Yea vg works too if ur a diy. I just use shitty juice I'm not gonna vape ever. Works better than water because it doesn't evaporate as fast, and more surface tension one it
@@chrisparks6537 ?
Check resistance before you get started? I know what you mean but I think that's been my struggle some times. As learning, not sure what wire gauge and chem combination will give you the resistance you want. Easy with single wire builds and such, not sure if there's an app that will estimate the resistance of "exotic" coils. I just wing it and if it's not the resistance I want then I do it again with other gauges or wire chems.
RCBound there are some good apps for checking estimated resistance. They have functionality for exotic builds as well. You’ll waste way less wire and be much safer if you learn the principles of ohms law
Sherlock Hohms thanks for the reply. I have an AAS of electronics tech so I'm well aware of ohms law. I didn't know there was an app to estimate alien wire builds and such. I know steam engine does twisted wire and asks for the pitch. Hope your move has gone well, just bought a house myself and in the process of revamping before moving in.
what RDA are you using in the video?
I think the biggest revelation for most people watching this will be that the first clapton wrapped wire you make is the springy looking wire that eventually makes the alien wrap around the regular round wires.
Sois he vjust wrapping 36 ribbon around 26 core wires or is he making 3 Clapton's(26-36) then using ribbon around already claptoned wire? Thats where he lost me..Thank you so much 😊👌
@@michaelcard9382 he’s not using ribbon wire at all. It’s round wire wrapping in this build. If you use ribbon wire to wrap like an alien-style it’s called “tsuka”.
Ok I'm new to building but (yes I'm dumb) are there alien outwire, wire?
What RDA is that in this video I am going to get one???
Apex rda by timesvape
Bro I need some help,what battery do you recommend for using this kind of build
Sony VTC5A
Thanks man, brilliant as always, merry christmas to u and ures
Thanks buddy!! you too
What is that "swivel" you are using? Is there a link to the set up? I just saw your video and subscribed.
Do you feel reverse is easier? I do mine in foward, but just started being able to do 10in without screwing up so I can relearn if its worth it.
reverse what?
Nice video! But i love the dripper, pls tell me the Name
how to you use your drill? i see it is still spinning while you are moving the paperclip, but also still holding your decore. three hands? or do you have a way to make the drill go without pressing the button?
I have a control switch
@@SherlockHohms oh awesome sauce. I will look into that; thanks for the reply
Man watching you do this shit is amazing keep em coming. Happy holidays
Thanks, you too!
I lost my shit when the santa hat came in 😂😂😂 gunna give this a shot right now, going to buy a new drill since i believe that's why my cores are collapsing since the jawls have a gap in the middle
thats going to make things harder. i definitely recommend a drill with clamps that close completely
What i meant was the drill i was using had the space in the middle cause it was an old ass drill. The new one i bought the day i commented on this had no space between the jawls
@@nickkduhh did it work with you the new drill, im using my dads drill i guess its made on 1988 i guess heeehhe
someone probably asked, but what dripper is that?
Have you tried using twisted wire as cores if so what tips would you give me for this, im planning to use 2 cores twisted 28g stainless?
I could use some help im not build coils but getting into rebuilding going tp an rta i like higher resistance so i can run at lower wattage like alien fused Clapton going to b in dual coil rta just bought creed rta what resistance and inner diameter to get to .3 resitance in dual mode
You use kanthal??
Sometimes
You think starting with 3 cores is easier that starting with 2 cores?
Adrienne Sosa no, easier to start with 2
When you're wrapping your decore does it matter what end you start with? Meaning are you starting with the end you left the tail on in the drill? Hope this makes sense
Nick Nitchoff it doesn’t matter which end you use. The wrap will be the same direction
Sherlock Hohms I was worried about that one myself and started all over. But now I know better. Without you and all the other awesome builders I would be so lost! You guys are so awesome and giving with the knowledge that you all bestow upon us. I myself am truly grateful. I knew here. (2 building) but you guys teach us beginners the coil gospels like we are all equals. You guys kick so much a$$!
What swivel merk?
What kind of cotton u use?
Any kind, it's all the same
Thank you!!!
Great video, great concise explanation too.
Merry Christmas sir. Have a fantastic time.
thanks nick, you too
Awesome video, here are a new subscriber
Damn, looks so easy when YOU do it... Great video!
you get the hang of it eventually, keep at it
tension will help, I normally run my wire from the drill to a swivel at the end of my desk clipped onto a c clamp even when using the daedalus coil jig, especially if I am going to clapton a 3 or 4 core clapton. Hope this helps
I’ve only ever used the no stretch method. Never seem to manage a descent pair though. But happy when it comes together. I have always wrap in the same direction. Might be why I don’t manage any good lengths. Thanks for the advice. Very helpful.
Michael Skyrme you can’t wrap the same direction as the clapton dude
thats definitely why
Can i build fused clapton coil with this trick ?
??
You no need to use any tricks because fused clapton is just the regular clapton with 2 cores you can use the regular wire from your spool without stretching or no-stretching...
What is the rda ???
I can do no stretch for dual core 24 aliens but for 3 x 26 cores i usually way understretch a bit so i can put less tension on the wire. I use lego for support. Ill need to try paperclips
Thanks...happy holidays
youre welcome. you too!
Still watching your videos brother!
My problem when I first started was getting the angle right I was not far enough my biggest advice would be to with a big angle when your first starting so you at least get a coil then as you learn you can get better with the angle
FukLuck Ed hahaha dude I was throwing my drill. Aliens were a bitch for me
Sherlock Hohms it took me three attempts before I got it good enough to get two coils out of 18 inches of wire I did get a coil out of my first 3 attempts maybe took me ten attempts to do a whole stick with no fuck ups now I can just go thru them, I do need better swivels I just build for me so I don't have to buy coils so I'm kinda cheap so the swivels I had were ok but need to invest in some better ones
My biggest issue is the wire jumping when I Clapton but you wire is dead solid. What’s the trick?
tension. keep the drill pulled tight and make sure everything is centered
I like this video. Everyone talks about the no stretch method and I never find it. Good job.
thanks!
so is it that you just dont pre-stretch the coil out and keep your fingers far away from the 3 cores?
ForthcomingTruth pretty much
Yes! thanks for this! I always wanted to make aliens, but was afraid of over/under stretching it.
What size would you recommend for frames if im using .4 ribbon
What is the rda that you put the build on? The build deck looks super sweet. Your build is awesome also.
CSMNT
no
the apex rda by timesvape
Thank you good sir.
Can it be both temco wires?
Andres Rivero Vazquez yep. So tempco is a brand just like kbees, lightening Vapes, kidney puncher. Each offer different types of metals like kanthal, Nichrome, and stainless steel. You can mix different metals from different brands as long as you understand that doing so will make predetermining your resistance much harder. So I recommend sticking with the same metal at first, especially if you’re a beginner. Did that help?
Sherlock Hohms Sure thing! thanks! I posted in another of your videos about the omhmage of the alien coils in dual and what type of battery do you use in mechanical mods?
Sherlock Hohms that helps me to choose what to build with now. Good tip!
is this build good for flavor ? i'm looking for a fused clapton build for flavor on my Drop rda :(
Krisha Aquino Fan one of the best
wow i didn't expect the maker to reply :D thanks ! i really wish your products are availabe in the philippines
does fuchai squonk 213(single batt) handle this?
Awesome video brother and can't wait to see the next one
thanks buddy!