How to Replace Power Steering Pressure Hose 2003-2011 Mercury Grand Marquis

Buy Now!
New Power Steering Pressure Line Hose Assembly from 1AAuto.com 1aau.to/ia/1ASP...
This video shows you how to install a power steering pressure hose on your 2003-2011 Mercury Grand Marquis.
This process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa7a/1A...
• 13mm Wrench 1aau.to/oNB/1AX...
• 18mm Wrench
• 19mm Wrench 1aau.to/oNB/1AX...
• 10mm Socket 1aau.to/oaRI/1A...
• 11mm Socket 1aau.to/oa9v/1A...
• Oil Filter Wrench 1aau.to/oa7/1AX...
• Pliers
• Ratchet 1aau.to/obj9/1A...
• Torque Wrench 1aau.to/oaqh/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ox9/1AX...
• Gloves 1aau.to/oEG/1AX...
• Paper Towels 1aau.to/ox9/1AX...
• Safety Glasses 1aau.to/oyo/1AX...
• Transmission Fluid
• Drain Pan 1aau.to/ouo/1AX...
• Floor Jack 1aau.to/oSS/1AX...
• Jack Stands 1aau.to/oMM/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@ninline2000]

I love the surprise in his voice as he says "sometimes it just pops open." I get the feeling that's uncommon.

[@davidlaster5645]

You guys made this seem so easy it definitely a pain in the rear especially the line that goes into the power steering pump🙄🙄

[@Jay.Walker]

5:00 remove belt, remove pump pully, grab a 11/16 wrench. Grind the 11/16 wrench front, back & sides for easy remove and install.

[@tuco86x]

This definitely isn't a Midwest car. I had to take a sawzall to the line going into the power steering pump. This way I could put a 18mm socket on it. Even then it took all my strength break it loose. Never would have come off w a stubby. Also I used a 18mm crowsfoot to put that line back on until the very end. Then I used a stubby

[@adamcrownvictoriacarrepair7105]

Need a video for the pump

[@Anthonythesider]

This crown vic seen better days

[@T.W.goodguy]

Thanks, good information,😁🤙,now I know where to look for a leak. And what the mechanic has to do. And to recheck the fluid and oil level.😉👍

[@Mirian2000000]

Very video, thanks for posting ❤

[@doffey01]

Are the lines supposed to feel loose at the rack? My bolt is tightened and everything is lined up just both lines wiggle a bit in there.

[@stizan24]

I can do this! Thank you!

[@TRQ]

+stizan24 Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@TERRORoftheLORD]

Is this the same on a 2005 Ford Crown Victoria LX?

[@TRQ]

+TERRORoftheLORD The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ

[@kennethtorreggiani3801]

which is the high pressure port on the rack or does it matter