🤔 CARBON FIBER HOOD (VIS) | WORTH THE MONEY? | FITMENT ISSUES | 2015-2021 SUBARU WRX STI
HTML-код
- Опубликовано: 12 окт 2020
- VIS Hood (VS2) www.vividracing.com/vis-racin...
⇢MY NEW MERCH STORE
wrx.cacemerch.com
⇢MY NEW AMAZON STORE:
www.amazon.com/shop/influence...
⇢OLD MERCH STORE (New products coming soon)
www.mywrxchannel.net
》》》》》》》》》》》》》》》》》》》》》》》》》》》
Business Inquiries, contact:
mywrxchannel@gmail.com
**UPDATED LINKS**
►ROKI MAZDA OIL FILTER: amzn.to/3kUPIin
►Motul 5W-40 X-Cess: amzn.to/3cdUC77
►Motul Sport 5W-40 (E85 STI's): amzn.to/2HiKVJr
Camera Gear I use:
►MAIN CAMERA/SONY A6300 4K: amzn.to/2opoJQg
►LENS/SIGMA 16MM 1.8: amzn.to/2CYYTvM
►DJI RONIN M: amzn.to/2hYQXSX
►DJI RONIN S: click.dji.com/AAGmavNhCTUj4f8...
►MAIN CAMERA GIMBAL STABILIZER: amzn.to/2tWcbSR
►DJI MAVIC 2 DRONE: click.dji.com/AO6groZslU5ERPK...
►GOPRO HERO7 BLACK: amzn.to/2yYWf6v
►GOPRO HERO 5 SESSION:
►AWESOME Suction Cup Mount: amzn.to/2kToNVp
►QUICK RELEASE PLATE: amzn.to/2RQpa2T
Maintenance
►Motul 5W-40 X-Cess: amzn.to/3cdUC77
►Motul Sport 5W-40 (E85 STI's): amzn.to/2HiKVJr
►Motul 300V 5W-40: amzn.to/2FQfLIA
►ENGINE OIL (ROTELLA T6): amzn.to/2KVrzKW
►Pennzoil Ultra Platinum (FA20 WRX) (Single Quarts Case): amzn.to/2kPXu2a
►OIL FILTER (OEM STI ): amzn.to/2xsW1TY
►FUMOTO DRAIN VALVE (STI): amzn.to/2YtCfUf
►Motul 75W-90 Transmission and Differential Gear Oil (5-Pack): amzn.to/2FLosE6
►OEM Cabin Air Filter: amzn.to/2jkeJrW
►HAWK HP PLUS (autocross ONLY) Brake Pads: amzn.to/2khjUbN
►RBF600 Brake Fluid: amzn.to/2kltFFB
►EGR DELETE KIT: amzn.to/2OiKRXE
►NOCO GB40 JUMP STARTER: amzn.to/2vUx05c
►VP RACING E85 GAS JUGS: amzn.to/2Mzhpko
Wash:
►$16 FOAM CANNON: amzn.to/2wvKD89
►PRESSURE WASHER: amzn.to/2LeeOvp (UPDATED)
►ADAMS CAR SHAMPOO: amzn.to/2xBZGR6
►BEAD MAKER: amzn.to/2Ce5Esx
►MR PINK FOAM CAR WASH: bit.ly/ChemicalGuysCarWash
►ADAMS WASH MITT: amzn.to/2or3Wg9
►ADAMS BUCKET W/ GRIT GUARD AND LID: amzn.to/2FvR8N5
►DETAILER/WATERLESS WASH: bit.ly/ChemicalGuysEcosmart
►WHEEL CLEANER: amzn.to/2hXRxk0
►TIRE DRESSING APPLICATOR: amzn.to/2kgXqHU
►TIRE DRESSING (CARPRO PERL): amzn.to/2H9ad7V
►INTERIOR CLEANER: amzn.to/2khlBWn
►GLASS CLEANER: amzn.to/2jGTnno
►SONAX PERFECT FINISH POLISH (THIS STUFF WORKS GREAT!): amzn.to/2mUI12S
►GRIOTS COMPLETE COMPUND POLISH: amzn.to/2jtexBX
►ADAMS H20 GUARD AND GLOSS: amzn.to/2BOQOJw
►WAX COLLINITE 845: amzn.to/2AjE5Mo
►SEALANT JESCAR POWERLOCK PLUS: amzn.to/2KzBYJi
Interior
►Mountek Magnetic Phone Holder: amzn.to/2k6CL73
►Accessport Magnetic Vent Holder: amzn.to/2kIHsDk
►Husky Floor Mats (Fits STI, WRX, Impreza, Crosstrek): amzn.to/2kCX0cf
►3D MAXPIDER ALL WEATHER FLOOR MATSamzn.to/2quwl5P
►Squash JDM Air Freshener (Awesome smell!) amzn.to/2jkdnOd
Performance:
►Invidia Catted Downpipe (STI): amzn.to/2kJRmu5
►Perrin 20mm Wheel Spacers: amzn.to/2Jp7VUt
►Perrin Shift Bushing (WRX): amzn.to/2kTMpJg
►Perrin Shift Stop (WRX): amzn.to/2jV4Uzm
►Boomba Short Throw Shifter (WRX): amzn.to/2kpuKgf
►PERRIN OIL COOLER (STI): amzn.to/2XsUM6I
Engine Bay:
►Perrin NEON YELLOW Radiator Shroud (WRX & STI): amzn.to/31mLSVM
►Perrin NEON YELLOW Battery Tie Down: amzn.to/2GPef6X
►Perrin NEON YELLOW Pulley Cover (STI): amzn.to/2KyE8Jg
►Perrin NEON YELLOW Pitch Stop Mount: amzn.to/2KtrRpI
►Perrin NEON YELLOW Window Vents: amzn.to/2OE1WRf
►Perrin NEON YELLOW Strut Brace: amzn.to/2YJicjY
►Perrin NEON YELLOW Boost Control Solenoid Cover (STI): amzn.to/2T87bra
►Perrin NEON YELLOW Master Cylinder Brace: amzn.to/31mMpXM
Exterior:
►Grimmspeed License Plate Relocation Kit: amzn.to/2kli4Xj
►APR Carbon Fiber License Plate Backing: amzn.to/2kl4iV0
►MORIMOTO LED Fog Lights: amzn.to/2jtRVGg
►OEM VORTEX GENERATOR: amzn.to/2qlUix0
►RALLY ARMOR MUD FLAPS: amzn.to/2pPcCvA
►INSTAGRAM: / my_wrx_channel
►FACEBOOK: / mywrxchannel
►TWITTER: / my_wrx_channel
Mailing Address:
My WRX Channel
5201 Tracyton BLVD NW #783
Tracyton, WA 98383
www.paypal.me/mywrxchannel
#STI #WRX #SUBARU 
Авто/Мото
Marsh composites huh. Sounds good 👍. Great video. Stay safe brother.
I am looking at ordering one right now!Cannot wait!!!!!
I agree with everything on this video about the hood. I had to loosen the driver side fender to slightly close that gap.
Good option for block off plate?
@@zero7hree487 for this hood, there isn’t one you can buy. For the OEM hood, verus sells one.
@@CarsWithJR I figured, I was looking at it trying to figure out how I can fabricate one.
You can play with the fenders and lights untill it fits righty not sure if you knew.
Thanks for the transparency man. I was very close to ordering one of these myself. Back to the drawing board.
📝
first !
That good looks so good, I want to get one as well.
So which hood would you go instead of this going carbon fiber hood soon it would help me.
Great talking points! You need to get an ETS FMIC kit to fit the Marsh Composites hood 100%. If you choose to go rotated down the road, it's simple as changing the hot side piping for the big spooly boy. The cold side can stay the same. 🍻🍻🍻
Thanks bro! So exited for you with the new hood!
@@CarsWithJR Thanks! And to you for your new power bump!
I've got an 18 Impreza, what kind of Headlight models are compatible with it?
Dear @Cars with JR, what happens if you drive in the rain without rain guards ??? and how bout winter does the engine heat up with so much vents ?
Do you have a short throw shifter if yes which one?
Good fitting carbon hoods are expensive. I had a chargespeed hood and it fit like oem. Crazy expensive though
Thanks you sir!
I was considering getting a carbonfiber hood after my OEM aluminum hood was recently dented but I think I will stick with OEM.
I just got my hood dented and debating on what to do. What route did you end of taking?
A nice looking hood JR. 👌 Subies forever.
Damn you explain every detail about the hood better than the makers themselves lol. I'm debating if I should get it or not as well because I might go FMI too. Thanks for all the info bro! 😁
Thanks bro! 👌
I got me the vis racing hood for my c5 corvette oem style it wasn't complete the underside of hood had nothing fused and I couldn't attach my hinges to my car the latch was at the nose but if you know corvette they operate window there where holes for windshield fluid not on a corvette there attach at wipers it was soo bad .. waste of time and money.
I’m not too sure on the marsh composites one lol 🥴
The varis one is 🔥 and expensive
Does the verus hood scoop plate fit this hood hood?
First thought every time you see these hoods is that they don't match or really go with the Aesthetics of the car. Maybe it would look better with black paint I know it was the rally cars traditional color but I'm not a fan of this pearl blue.
What’s that Perrin hood latch thing for? Spacer or
Where do you the hood scoop mesh?
where can i get the mesh from ?
Wheels setup?
Definitely should let a good body man touch it definitely could get that to fit way better
No wonder your having Fitment issues it’s miss aligned.with the hood popped your passenger sits lower than your driver that’s before the stops add washers
There are washers installed.
There’s also micro adjustments your can do to the door and fender it’s very tedious to do though
Hot boy points 🤣🤣
Charge speed > *
Was that @different_not_less_wrx car
Yes sirr
Man, for the price it's not worth it. Thank you for being honest
Thanks for the video n details...to be honest looks shit especially the fitments I mean u paying good money for something that supposedly fit n doesn't sits right that just shit job by the company... so I'll be getting something else... thanks for the video again
A little over speed limit 😂
small amount over
Just a wee bit over officer
HELL YEAH
I'll save you the time. No. VIS and Seibon are both fiber glass rip offs posing as carbon fiber. If you want a real carbon fiber hood send me a message and I can send you to a guy that literally makes full carbon fiber hoods or any body panel you would ever want.
Yes. I mentioned that in the video. Thanks.
@@CarsWithJR Yeah I saw that during the video. Glad you included that. Love your channel I just hate these companies ripping off people with fake carbon products. The guy I know isn't the same company you mentioned. He makes molds off of the existing body panels and can do color'd full carbon.
@@Hellblaue210 can he make me a custom white carbon fiber steering wheel to match my harnesses and seats?
@@snailboah yeah i think so, dude has done some crazy stuff, its not cheap though. I think he quoted me 5k for a hood and like 3500 for a trunk (blue carbon fiber with a specific weave pattern direction) but he has videos of him taking sledge hammers at the hoods he has built and trashed and it just takes it. He doesn't have a business website but his name is Jay Bradley, I can't send you his facebook page if you need to get in contact with him.
@@Hellblaue210 hey you think you can send me the info of the gentleman you are talking about?