This is successful only in about 50% cases & is rarely a clean cut. Better option: fill the bottle with used engine oil & introduce a red hot rod in it. Due to expansion, the bottle will crack cleanly. This can also be used to cut the bottle at an angle
These techniques will turn out perfectly if you use a glass cutter to score the bottle first. You can see the second one broke all over the place. Good luck sanding that out to make it even.
@@nurturaanimae Actually I have, and the glass cracked every time unless I used highly purified quartz glass (expensive) or synthetic fused silica ( VERY EXPENSIVE).
If you like this video, please don't forget to subscribe to the channel to see more videos❤
👍👌👌
That was awesome.
The last ome was specially satisfying. I will definitely try it.
Thanks for sharing.
Glad you liked it❤
Absolutely awesome, ingenious!
You make it look easy but what u use to cut the grass
*Útil método para cortar vidrio. Prefiero la primera opción, por supuesto que el grosor es menor quizás, que la botella. Muchas gracias.*
*Muchas gracias por tu respuesta. Muchas bendiciones.*
Seems so easy 😊thank you. You’re amazing.
Wonderful skill, thank you.
How many watts is this soldering iron machine and which company?
Saludos desde Argentina!!! Me parecio mas practico, sencillo y facil el primero.😁👍
Ooooo. How easy it was to cut the glass bottle😮
👍🙏❤
Like!
Si no me funcionan estos tips, vuelvo y lo retiro😁
Saludos y gracias!
¿Le funcionaron? 🤔
We shall see .. . Going to try this on a light globe now......
Are you sure it's safe to touch the water while it's still plugged in?
Did you ever use an immersion heater? It's rather the same
I think you can disconnect when touching the water to separate the two parts immediately after immersion??
@@cssuntherraoit didn’t work, I died.
😂😂@@Jesusifer
Probablemente ya esté desconectado de la corriente eléctrica
What is the screw n instrument name please from where can we buy sir
Soldering iron
This is successful only in about 50% cases & is rarely a clean cut.
Better option: fill the bottle with used engine oil & introduce a red hot rod in it. Due to expansion, the bottle will crack cleanly. This can also be used to cut the bottle at an angle
Gracias por compartir tan interesantes video saludos dé puebla México
Thank you for the video
Please what did you spray on the first one
Se le pone alcohol
Do you on plong the thing before you put.it on the water ?
That's great, friend, I'll try it❤
ingenious!!!
What's on the little spray bottle?
What fluid did you spray on the material before setting it on fire?
Did you get the reply which spray did she spray.
@@margaretsimon8319 No, I did not
@@margaretsimon8319 No, I did not
u can use alcohol,diesel,whatever yiu want,but dont use amaterasu
Alcool
Very good
❤🙏
Very good maine tryy kia hai
Great
Is it original video
Superb ❤
what is the solution that you spray on to the wool?
Alcohol
Can use methylated spirits or surgical spirit ???
What kind of wire do you use? Would any type of wire be ok?
Éso es cobre
These techniques will turn out perfectly if you use a glass cutter to score the bottle first. You can see the second one broke all over the place. Good luck sanding that out to make it even.
Work in glass containor factory 38 years inspecters use hot wire to ring them
What type of wire is used? Copper?
Best
wat type of acid did you use
Alcohol
Plz do share the time required for soldt machine to heat the bottle.....for mine it is taking eternity 😢
Nice one ❤🧡💛
Boa noite meu like
Of course you have to unplug the iron before put it into water
Whst to do with bottle after cutting :\
what an experience
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Na Guara. Ufff Mucho Más Fácil y Con Menos Peligro😮😉😎🙂👵🤢👍
👏🏻👏🏻
❤🙏
Good jop
No me sirvió lo del cautín
He genuinely use hand sanitizer ❤❤😂😂
Quebrou garrafa uzando a força
❤❤❤
❤🙏
Okay, but you only cut it into two pieces. I use a reciprocating saw and get thousands of pieces!
La mayoría de nosotros solo deseamos recortar unas cuantas botellas, no queremos "Miles" como presumes 👎👎👎
😂😂😂
Dear friends it is. Not save
....the video makes it look simple, but it's not saying what's being used so its kinda useless.
😕
🙆👍👍
Cosa metti non ho capito scusami
What is the point to cut it😅😅😅😅
🎉
❤🙏
Tudo fake
Por favor quiten esa música tan repetitiva por dios
I'm skeptical...MAYBE this is fake.😮
Just try. What does it cost ?
@@nurturaanimae
Actually I have, and the glass cracked every time unless I used highly purified quartz glass (expensive) or synthetic fused silica ( VERY EXPENSIVE).
ለምን አባህ ብየ እቆርጠዋለሁ ሽርሙጣ አጭበርባሪ
Nnj
not safe at all
Soldering iron
👍👍👍
👍🏻👍🏻👍🏻
not safe at all