Nerf Fortnite SP-L: Stage 1- The basics (AR + Lock removal + spring upgrades + tips)
HTML-код
- Опубликовано: 4 окт 2024
- First video in a series I plan to make on modding modding this neat internal magazine blaster.
Today I do a basic tear down, remove locks, delete the AR (air restrictor), inspect the plunger tube seal(very good), investigate possibilities for spring upgrade compatibility.
In the future I plan to attempt a brass sleeper breach and barrel, half dart conversion, some cosmetic work, find the optimal spring and more. Stay tuned.
I am thinking about placing an Airsoft Pistol spring in the SP-L. That should double the Velocity.
A spring too strong could break the plastic internals
a gas or spring pistol? you could probably get away with a spring pistol, but a gas pistol will blow up the gun
I tried upgrading the spring but it's hard because it's a unique shape. I tried putting a stronger one in but it makes it so the slide doesn't catch so you can't easily load it and somehow the performance got worse
Great mod video Man, I used it for mine
Oi, what did you use to replace your slide on the SP-L on the table? Looks slick!!!
I’m thinking of reducing the mag size so it looks cooler
superb video. audio is a lil low but maybe that is my end. got this blaster on special. thanks for the great mod vid sir
I wish we in the US got the grey triggers, would make painting so much easier.
@Eric VandenAvond , if you're modding, it doesn't matter about out of the box performance
@Eric VandenAvond normally only by like 4 or 5 fps
Ya I agree the Orange isn’t as cool
In Australia having a orange trigger is special because we didn't get them haha
im from finland and got the orange
where did you get the slide or the thing to replace the sight?
I broke my gun
LMAO
same
Same thsi is bullchit
@@msipatys5143That is your fault, do it at your own risk, plus you are not even old enough I believe, so don't do it, you need to be a professional
blaster*
Gun isn't appropriate term for Nerf, out of context
How did you keep the slide from slamming back into position? Meaning how did you get to lock when it’s pulled back?
The gun automatically does that
It’s kind like a hush puppy pistol but it’s nerf.
At 9:20 will your gun work if you take the spring out and don’t replace it?
No...?
No lol
@@oopsInc777 sorry i was kind of an idiot 7 months ago😂
Mine doesn't shoot straight anymore, and it often doesn't launch the bullet out the gun.. if I point the gun at the floor, the bullet will fall out.
You have a lemon. And it's dart not bullet.
Mines does tht too
Either you damaged the breach or using the wrong darts
@@deigima I gotta stick my finger done the barrel and push the bullet down then it shoots like a charm😂
@@chalfrmthaeast oh then theres a small piece of plastic in the barrel thats either out of tune or stuck
Guys i did mod it!! I HAVE UPLOADED THE VIDEO ON MY CHANNEL, AIR RESTRICTOR REMOVAL+PAINTJOB
My internal mag flew apart on me, and the pegs that keep the spring in the mag broke off 😢
:(
Thank you so much ,my magazine spring loose
Spring came loose
Ok, but how do I fix the little flap in the barrel when I’m loading the gun, it doesn’t stay up.
What type of spring is inside the retaliator?
tu t'es fournis ou pour le ressort ?
how did you remove the red dot sight?
After seperating the two main pieces, underneath the holosight half should be a black connection stick, on either sides are two screws that are holding it too the main frame
@@generalpancakes thanks man
Do you think it could take to brassing? I got the clear blue one, daughter likes it , don't want to upgrade the spring, so she can still prime it.
John James you Can brass breech any springer
A short brass barrel will work good, it won't work with the stock spring i dont think. The 4.5kg upgrade spring should be easy enough to prime for a kid still
That's a mega magnus don't mod it its rare
Or its a retailiator still it's rare
@@skelepus2171 , no they're not, the orange zombie strike rough cut I got for 1.99 is
can a worker 9kg spring go in there?
I have no doubt it would fit but whether it compresses enough to allow priming is the only speculation.
I think I know what mod I want. I could just pad the plunger
what spring did you applied there ?
Thank I was break my gun ans now with ut vidéo I win to répair
Bro please type that agin nobody can understand u
Thx bro
what diameter that spring was ?
Hey, I know you’re supposed to like make the gun better but I need to tell you something you know how people on screen their guns and stuff you know that’s a waste of money you have😢
Pls consider part 2
I just got my paint done, so im on fast track to half dart conversion and brass breach.
Paint video coming within the week
@@deigima false
@@iampoopybutt video is up isn't it
Thanks for
Ruining my pistol 👿
Thx
Bro make a m1 nerf grand
I broke my gun bc I wasn't careful :c
damn
same
Same mine only shoots 1 dart now
I broke my gun and then fixed it
Dam it my thing is broken now
where can i get springs for modding
AliExpress
Or you can take a spring from a different gun
home depot
What spring did you use
4.5kg, same shape as original.
Thank you
How do you load the gun after cuz it's not working
I replaced the spring, but now when priming the SP-L it won't slide all the way forward. Any ideas on how to fix?
yes i know exactly y
you have to fully put in the black tube inside. theres a little rubber thing, behind the tube
my i instagram is Reyes_20An if u can send pictures i can show you how to fix
you have to make sure the rubber thing is to the left and a little notch on the black tube is torwards the right of it
I Did everything this guy didn’t he broke my gun
If you did it with a screwdriver I did say its risky.
@@deigima what you can use different tools
@@muhai6920 as I said, a drill or Dremel is safer.
@@deigima oh
It is cool but i brote my gun so im sad now
Gray trigger its not as good as orange trigger
hell nah grey trigger way better
@@Swisso_ modded wise yes but from other countries no
No le entiendo mejor hable español
hi